=================== Conditions Database =================== The conditions database is the place where we store additional data needed to interpret and analyse the data that can change over time, for example the detector configuration or calibration constants. In many cases it should not be necessary to change the configuration but except for maybe adding an extra globaltag to the list via `conditions.globaltags ` .. _conditionsdb_overview: Conditions Database Overview ============================ The conditions database consists of binary objects (usually ROOT files) which are identified by a name and a revision number. These objects are called **payloads** and can have one or more **intervals of validity (iov)** which is the experiment and run range this object is deemed to be valid. A collection of payloads and iovs for a certain dataset is called a **globaltag** and is identified by a unique name. Payload An atom of conditions data identified by name and revision number * usually ROOT files containing custom objects * a payload cannot be modified after creation. Interval of Validity (iov) An experiment and run interval for which a payload should be valid * consists of four values: ``first_exp``, ``first_run``, ``final_exp``, ``final_run`` * it is still valid for the final run (inclusive end) * ``final_exp>=0 && final_run<0``: valid for all runs in ``final_exp`` * ``final_exp <0 && final_run<0``: valid forever, starting with ``fist_exp, first_run`` Globaltag: A collection of payloads and iovs * has a unique name and a description * can have gaps and overlaps, a payload is not guaranteed to be present for all possible runs. * are not necessarily valid for all data * are not valid for all software versions * are immutable once "published" * can be "invalidated" .. figure:: globaltag.png :width: 40em :align: center Schematic display of a globaltag: Different payloads with different revisions are valid for a certain set of runs. Once a globaltag is prepared it is usually immutable and cannot be modified any further to ensure reproducibility of analyses: different processing iterations will use different globaltags. The only exceptions are the globaltag used online during data taking and for prompt processing of data directly after data taking: These two globaltags are flagged as running and information for new runs is constantly added to them as more data becomes available. All globaltags to be used in analysis need to be fixed. Globaltags which are not fixed, i.e. "OPEN", cannot be used for data processing. Otherwise it is not possible to know exactly which conditions were used. If a globaltag in the processing chain is in "OPEN" state processing will not be possible. .. versionchanged:: release-04-00-00 Prior to release-04-00-00 no check was performed on the state of globaltags so all globaltags could be used in analysis When processing data the software needs to know which payloads to use for which runs so the globaltag (or multiple globaltags) to be used needs to be specified. This is done automatically in most cases as the globaltag used to create the file will be used when processing, the so called **globaltag replay**. However the user can specify additional globaltags to use in addition or to override the globaltag selection completely and disable globaltag replay. .. versionchanged:: release-04-00-00 Prior to release-04 the globaltag needed to always be configured manually and no automatic replay was in place If multiple globaltags are selected the software will look for all necessary payloads in each of them in turn and always take each payload from the first globaltag it can be found in. .. tip:: A set of tools is provided with basf2 for interacting with the conditions database via command line and operating actions such as creating globaltags, uploading payloads, etc. Such tools, called ``b2conditionsdb`` tools, are properly documented in :ref:`b2conditionsdb `. .. _configuring_cdb: Configuring the Conditions Database =================================== By default the software will look for conditions data in 1. user globaltags: Look in all globaltags provided by the user by setting `conditions.globaltags ` 2. globaltag replay: Look in different base globaltags depending on the use case: - **Processing existing files (i.e. mdst)**: the globaltags specified in the input file are used. - **Generating and events**: the default globaltags for the current software version (`conditions.default_globaltags ` are used. The globaltag replay can be disabled by calling `conditions.override_globaltags() ` If multiple files are processed all need to have the same globaltags specified, otherwise processing cannot continue unless globaltag replay is disabled. There are more advanced settings available via the `conditions ` object which should not be needed by most users, like setting the URL to the central database or where to look for previously downloaded payloads. .. versionchanged:: release-04-00-00 In release-04 the configuration interface has been changed completely to before. Now all settings are grouped via the `conditions` object. .. attribute:: basf2.conditions Global instance of a `basf2.ConditionsConfiguration` object containing all he settings relevant for the conditions database .. autoclass:: basf2.ConditionsConfiguration :members: Configuration in C++ -------------------- You can also configure all of these settings in C++ when writing standalone tools using the conditions data. This works very similar to the configuration in python as all the settings are exposed by a single class .. code-block:: c++ #include auto& config = Conditions::Configuration::getInstance(); config.prependGlobltag("some_tag"); Environment Variables --------------------- These settings can be modified by setting environment variables .. envvar:: BELLE2_CONDB_GLOBALTAG if set this overrides the default global tag returned by `conditions.default_globaltags `. This can be a list of tags separated by white space in which case all global tags are searched. :: export BELLE2_CONDB_FALLBACK="defaultTag additionalTag" .. versionchanged:: release-04-00-00 This setting doesn't affect globaltag replay, only the default globaltag used when replay is disabled or events are generated. Previously if set to an empty value access to the central database was disabled, now it will just set an empty list of default globaltags .. envvar:: BELLE2_CONDB_SERVERLIST this environment variable can be set to a list of URLS to look for the conditions database. The urls will at the beginning of `conditions.metadata_providers ` If :envvar:`BELLE2_CONDB_METADATA` is also set it takes precedence over this setting .. versionadded:: release-04-00-00 .. envvar:: BELLE2_CONDB_METADATA a whitespace separated list of urls and sqlite files to look for payload information. Will be used to populate `conditions.metadata_providers ` .. versionadded:: release-04-00-00 .. envvar:: BELLE2_CONDB_PAYLOADS a whitespace separated list of directories or urls to look for payload files. Will be used to populate `conditions.payload_locations ` .. versionadded:: release-04-00-00 .. envvar:: BELLE2_CONDB_PROXY Can be set to specify a proxy server to use for all connections to the central database. The parameter should be a string holding the host name or dotted numerical IP address. A numerical IPv6 address must be written within [brackets]. To specify port number in this string, append ``:[port]`` to the end of the host name. If not specified, libcurl will default to using port 1080 for proxies. The proxy string should be prefixed with ``[scheme]://`` to specify which kind of proxy is used. http HTTP Proxy. Default when no scheme or proxy type is specified. https HTTPS Proxy. socks4 SOCKS4 Proxy. socks4a SOCKS4a Proxy. Proxy resolves URL hostname. socks5 SOCKS5 Proxy. socks5h SOCKS5 Proxy. Proxy resolves URL hostname. :: export BELLE2_CONDB_PROXY="http://192.168.178.1:8081" If it is not set the default proxy configuration is used (e.g. honor ``$http_proxy``). If it is set to an empty value direct connection is used. Offline Mode ============ Sometimes you might need to run the software without internet access, for example when trying to develop on a plane or somewhere else where internet is spotty and unreliable. To do that you need to download all the information on the payloads and the payload files themselves before running the software: 1. Find out which globaltags you need. If you just want to run generation/simulation you only might need the default globaltag. To see which one that is you can run :: basf2 --info if you want to run over some existing files you might want to check what globaltags are stored in the file information using :: b2file-metadata-show --all inputfile.root 2. Download all the necessary information using the :ref:`b2conditionsdb ` command line tool. The tool will automatically download all information in a globaltag as well as the payload files and put it all in a sqlite file and the payload files in the same directory :: b2conditionsdb download -o /path/where/to/download/metadata.sqlite globaltag1 globaltag2 ... 3. Tell the software to use only this downloaded information and not try to contact the central server. This can be done in the steering file with the `conditions.metadata_providers ` and `conditions.payload_locations ` settings but the easiest is to use environment variables :: export BELLE2_CONDB_METADATA=/path/where/to/download/metadata.sqlite export BELLE2_CONDB_PAYLOADS=/path/where/to/download .. _cdb_payload_creation: Creation of new payloads ======================== New payloads can be created by calling ``Belle2::Database::storeData()`` from either C++ or python. It takes a ``TObject*`` or ``TClonesArray*`` pointer to the payload data and an interval of validity. Optionally, the first argument can be the name to store the Payload with which usually defaults to the classname of the object. .. code-block:: c++ #include #include #include std::unique_ptr beamParams(new BeamParameters()); Database::Instance().storeData(beamParams.get(), IntervalOfValidity::always()); In python the name of the payload cannot be inferred so it always needs to be specified explicitly .. code-block:: python from ROOT import Belle2 beam_params = Belle2.BeamParameters() iov = Belle2.IntervalOfValidity(0,0,3,-1) Belle2.Database.Instance().storeData("BeamParameters", beam_params, iov) By default this will create new payload files in the subdirectory "localdb" relative to the current working directory and also create a text file containing the metadata for the payload files. These payloads can then be tested by adding the filename of the text file to `conditions.testing_payloads ` and once satisfied can be uploaded with :ref:`b2conditionsdb-upload ` or :ref:`b2conditionsdb-request ` .. versionchanged:: release-06-00-00 When new payloads are created via ``Belle2::Database::storeData`` the new payloads will be assigned a revision number consisting of the first few characters of the checksum of the payload file. This is done for efficient creation of payload files but also to distuingish locally created payload files from payloads downloaded from the database. * If a payload has an alphanumeric string similar to a git commit hash as revision number then it was created locally * If a payload has a numeric revision number it was either downloaded from the database or created with older release versions. In any case the local revision number is not related with the revision number obtained when uploading a payload to the server.