Module for channel-by-channel gain/efficiency analysis. More...

#include <TOPGainEfficiencyCalculatorModule.h>

Inheritance diagram for TOPGainEfficiencyCalculatorModule:

[legend]

Collaboration diagram for TOPGainEfficiencyCalculatorModule:

[legend]

Public Types
enum	{ c_NParameterGainFit = 6 }
	enum for the number of parameters used in fitting charge distribution

enum	{ c_NPlotsPerChannel = 3 , c_NChannelPerPage = 4 }
	enum for the number of channels to show the result plots per page in an output PDF file

enum	EHistogramType { c_LoadForFitHeight = 1 , c_LoadHitRateHeight = 2 , c_LoadForFitIntegral = 3 , c_LoadHitRateIntegral = 4 }
	enum for LoadHistograms switch. More...

enum	EModulePropFlags { c_Input = 1 , c_Output = 2 , c_ParallelProcessingCertified = 4 , c_HistogramManager = 8 , c_InternalSerializer = 16 , c_TerminateInAllProcesses = 32 , c_DontCollectStatistics = 64 }
	Each module can be tagged with property flags, which indicate certain features of the module. More...

typedef ModuleCondition::EAfterConditionPath	EAfterConditionPath
	Forward the EAfterConditionPath definition from the ModuleCondition.

Public Member Functions
	TOPGainEfficiencyCalculatorModule ()
	Constructor.

virtual	~TOPGainEfficiencyCalculatorModule ()
	Destructor.

virtual void	initialize () override
	Load time vs charge 2D histogram from a given input file (paramter "inputFile") and prepare hit timing and pulse charge distribution for each channel.

virtual void	beginRun () override
	The main processes, fitting charge distribution and calculating gain/efficiency, are done in this function.

virtual void	event () override
	This will be empty as the all the processes are done in beginRun() function thus input file can be a dummy file.

virtual void	endRun () override
	Draw plots to show fitting results for each channel and save them into a given PDF file (outputPDFFile).

virtual void	terminate () override
	Termination action. More...

virtual void	defineHisto () override
	Define TTree branches to store fit results for each channel This TTree is saved in an output file given by "histoFileName" parameter of "HistoManager" module.

void	LoadHistograms (const std::string &histotype)
	Load 2D histograms from a given input file (output of TOPLaserHitSelector) and create timing and charge distribution as projection histograms for the x- and y-axis, respectively. More...

void	FitHistograms (EHistogramType LoadHisto)
	Fit charge (or integrated charged) distribution to calculate gain and efficiency for each channel.

void	DummyFillBranch (EHistogramType LoadHisto)
	Fill Dummy for Branch. More...

void	DrawResult (const std::string &histotype, EHistogramType LoadHisto)
	Draw results of gain/efficiency calculation for each channel to a given output file.

virtual std::vector< std::string >	getFileNames (bool outputFiles)
	Return a list of output filenames for this modules. More...

const std::string &	getName () const
	Returns the name of the module. More...

const std::string &	getType () const
	Returns the type of the module (i.e. More...

const std::string &	getPackage () const
	Returns the package this module is in.

const std::string &	getDescription () const
	Returns the description of the module.

void	setName (const std::string &name)
	Set the name of the module. More...

void	setPropertyFlags (unsigned int propertyFlags)
	Sets the flags for the module properties. More...

LogConfig &	getLogConfig ()
	Returns the log system configuration.

void	setLogConfig (const LogConfig &logConfig)
	Set the log system configuration.

void	setLogLevel (int logLevel)
	Configure the log level.

void	setDebugLevel (int debugLevel)
	Configure the debug messaging level.

void	setAbortLevel (int abortLevel)
	Configure the abort log level.

void	setLogInfo (int logLevel, unsigned int logInfo)
	Configure the printed log information for the given level. More...

void	if_value (const std::string &expression, const std::shared_ptr< Path > &path, EAfterConditionPath afterConditionPath=EAfterConditionPath::c_End)
	Add a condition to the module. More...

void	if_false (const std::shared_ptr< Path > &path, EAfterConditionPath afterConditionPath=EAfterConditionPath::c_End)
	A simplified version to add a condition to the module. More...

void	if_true (const std::shared_ptr< Path > &path, EAfterConditionPath afterConditionPath=EAfterConditionPath::c_End)
	A simplified version to set the condition of the module. More...

bool	hasCondition () const
	Returns true if at least one condition was set for the module.

const ModuleCondition *	getCondition () const
	Return a pointer to the first condition (or nullptr, if none was set)

const std::vector< ModuleCondition > &	getAllConditions () const
	Return all set conditions for this module.

bool	evalCondition () const
	If at least one condition was set, it is evaluated and true returned if at least one condition returns true. More...

std::shared_ptr< Path >	getConditionPath () const
	Returns the path of the last true condition (if there is at least one, else reaturn a null pointer). More...

Module::EAfterConditionPath	getAfterConditionPath () const
	What to do after the conditional path is finished. More...

std::vector< std::shared_ptr< Path > >	getAllConditionPaths () const
	Return all condition paths currently set (no matter if the condition is true or not).

bool	hasProperties (unsigned int propertyFlags) const
	Returns true if all specified property flags are available in this module. More...

bool	hasUnsetForcedParams () const
	Returns true and prints error message if the module has unset parameters which the user has to set in the steering file.

const ModuleParamList &	getParamList () const
	Return module param list.

template<typename T >
ModuleParam< T > &	getParam (const std::string &name) const
	Returns a reference to a parameter. More...

bool	hasReturnValue () const
	Return true if this module has a valid return value set.

int	getReturnValue () const
	Return the return value set by this module. More...

std::shared_ptr< PathElement >	clone () const override
	Create an independent copy of this module. More...

std::shared_ptr< boost::python::list >	getParamInfoListPython () const
	Returns a python list of all parameters. More...

Static Public Member Functions
static double	TOPGainFunc (double var, double par)
	Fit function of pulse charge (or charnge) distribution for channel(pixel)-by-channel gain extraction, given by "[0]pow(x-[4],[1])exp(-pow(x-[4],[2])/[3])" smeared by Gaussian with a constant sigma to consider baseline fluctuation.

static double	FindPeakForSmallerXThan (TH1 *histo, double xmax=0)
	Find peak and return its position for a limited range of x (x smaller than the given value (xmax))

static void	exposePythonAPI ()
	Exposes methods of the Module class to Python.

Protected Member Functions
virtual void	def_initialize ()
	Wrappers to make the methods without "def_" prefix callable from Python. More...

virtual void	def_beginRun ()
	Wrapper method for the virtual function beginRun() that has the implementation to be used in a call from Python.

virtual void	def_event ()
	Wrapper method for the virtual function event() that has the implementation to be used in a call from Python.

virtual void	def_endRun ()
	This method can receive that the current run ends as a call from the Python side. More...

virtual void	def_terminate ()
	Wrapper method for the virtual function terminate() that has the implementation to be used in a call from Python.

void	setDescription (const std::string &description)
	Sets the description of the module. More...

void	setType (const std::string &type)
	Set the module type. More...

template<typename T >
void	addParam (const std::string &name, T &paramVariable, const std::string &description, const T &defaultValue)
	Adds a new parameter to the module. More...

template<typename T >
void	addParam (const std::string &name, T &paramVariable, const std::string &description)
	Adds a new enforced parameter to the module. More...

void	setReturnValue (int value)
	Sets the return value for this module as integer. More...

void	setReturnValue (bool value)
	Sets the return value for this module as bool. More...

void	setParamList (const ModuleParamList &params)
	Replace existing parameter list.

Private Member Functions
std::list< ModulePtr >	getModules () const override
	no submodules, return empty list

std::string	getPathString () const override
	return the module name.

void	setParamPython (const std::string &name, const boost::python::object &pyObj)
	Implements a method for setting boost::python objects. More...

void	setParamPythonDict (const boost::python::dict &dictionary)
	Implements a method for reading the parameter values from a boost::python dictionary. More...

Private Attributes
TTree *	m_tree = 0
	ntuple to store summary

std::vector< TBranch * >	m_branch [4]
	ntuple to store summary of gain using height distribution. More...

TH2F *	m_timeChargeHistogram [c_NChannelPerPMT] = {}
	2D histogram of hit timing and pulse charge (or charge), taken from an output file of TOPLaserHitSelector

TH1D *	m_timeHistogram [c_NChannelPerPMT] = {}
	hit timing distribution, extracted from m_timeChargeHistogram as a projection along its x-axis. More...

TH1D *	m_chargeHistogram [c_NChannelPerPMT] = {}
	pulse charge distribution, extracted from m_timeChargeHistogram as a projection along its y-axis with timing cut. More...

TH1F *	m_nCalPulseHistogram
	histogram to store the number of events with calibration pulse(s) identified for each asic (1,024) in total More...

TF1 *	m_funcForLaser [c_NChannelPerPMT] = {}
	array of TF1 pointer to store fit function for hit timing distribution

TF1 *	m_funcForFitRange [c_NChannelPerPMT] = {}
	array of TF1 pointer to store fit function for pulse charge distribution, defined only for fit region

TF1 *	m_funcForFullRange [c_NChannelPerPMT] = {}
	array of TF1 pointer to store fit function for pulse charge distribution, defined only for full range of pulse charge

std::string	m_inputFile = ""
	input file containing timing vs charge 2D histograms (output of TOPLaserHitSelector)

std::string	m_outputPDFFile
	output PDF file to store plots of 2D histogram, timing, and charge distribution for each channel More...

std::string	m_fitoption
	charge histograms fitting option. More...

short	m_targetSlotId = 0
	slot ID

short	m_targetPmtId = 0
	PMT ID.

short	m_targetPmtChId = -1
	PMT channel ID.

short	m_hvDiff = 0
	HV difference from nominal HV value. More...

float	m_fitHalfWidth = 1.
	half fit width for direct laser hit peak in [ns] unit

float	m_threshold = 100
	pulse charge threshold, which defines lower limit of fit region and efficiency calculation

float	m_thresholdForIntegral
	pulse integral threshold, which defines lower limit of fit region and efficiency calculation More...

float	m_p0HeightIntegral = -50.0
	Parameter from p0 + x*p1 function that fits height-integral distribution.

float	m_p1HeightIntegral = 6.0
	Parameter from p0 + x*p1 function that fits height-integral distribution.

float	m_fitMax = 0
	upper limit of fit region for pulse charge distribution, determined based on m_fracFit value

float	m_fracFit = 0.99
	fraction of events which are covered by an area [0,m_fitMax]

float	m_initialP0 = (float)(-1.)
	initial value of the fit parameter p0

float	m_initialP1 = (float)(-1.)
	initial value of the fit parameter p1

float	m_initialP2 = (float)(-1.)
	initial value of the fit parameter p2

float	m_initialX0 = (float)(-1.)
	initial value of the fit parameter x0

float	m_pedestalSigma = 10.
	sigma of pedestal

short	m_pixelId = 0
	pixel ID, calculated from PMT ID and PMT channel ID

short	m_pmtChId = 0
	PMT channel ID.

float	m_hitTiming = 0
	timing of laser direct photon hits, given by Gaussian fit mean

float	m_hitTimingSigma = 0
	Gaussian fit sigma for a peak of laser direct photons in hit timing distribution.

int	m_nEntries = 0
	entries of pulse charge distribution

int	m_nCalPulse = 0
	the number of events with calibration pulse(s) identified

int	m_nOverflowEvents = 0
	the number of events outside histogram range

float	m_meanPulseHeight = 0
	histogram mean of pulse height distribution

float	m_meanPulseHeightError = 0
	histogram mean error of pulse height distribution

float	m_gain = 0
	calculated gain from fitting of pulse charge distribution

float	m_efficiency = 0
	calculated efficiency from fitting of pulse charge distribution

float	m_p0 = 0
	fit result of p0

float	m_p1 = 0
	fit result of p1

float	m_p2 = 0
	fit result of p2

float	m_x0 = 0
	fit result of x0

float	m_p0Error = 0
	fit error of p0

float	m_p1Error = 0
	fit error of p1

float	m_p2Error = 0
	fit error of p2

float	m_x0Error = 0
	fit error of x0

float	m_chisquare = 0
	chi2 of fitting

int	m_ndf = 0
	NDF of fitting.

float	m_funcFullRangeIntegral = 0
	integral of fit function for its full range

float	m_funcFitRangeIntegral = 0
	integral of fit function for a range [threshold, fitMax]

float	m_histoFitRangeIntegral = 0
	integral of histogram for a range [threshold, fitMax]

float	m_histoMeanAboveThre = 0
	mean of histogram above threshold, ignore overflow bin

std::string	m_name
	The name of the module, saved as a string (user-modifiable)

std::string	m_type
	The type of the module, saved as a string.

std::string	m_package
	Package this module is found in (may be empty).

std::string	m_description
	The description of the module.

unsigned int	m_propertyFlags
	The properties of the module as bitwise or (with \|) of EModulePropFlags.

LogConfig	m_logConfig
	The log system configuration of the module.

ModuleParamList	m_moduleParamList
	List storing and managing all parameter of the module.

bool	m_hasReturnValue
	True, if the return value is set.

int	m_returnValue
	The return value.

std::vector< ModuleCondition >	m_conditions
	Module condition, only non-null if set.

Detailed Description

Module for channel-by-channel gain/efficiency analysis.

2D histograms of hit timing and charge (integral or pulse height), crated by TOPLaserHitSelectorModule,

Definition at line 35 of file TOPGainEfficiencyCalculatorModule.h.

Member Enumeration Documentation

◆ EHistogramType

enum EHistogramType

enum for LoadHistograms switch.

CS means Charge Share. IsoratedHit is used for gain calc. and IncludePrimaryCS is used for efficiency calc..

Definition at line 52 of file TOPGainEfficiencyCalculatorModule.h.

                         { c_LoadForFitHeight = 1, c_LoadHitRateHeight = 2,
                           c_LoadForFitIntegral = 3, c_LoadHitRateIntegral = 4
                         };

◆ EModulePropFlags

enum EModulePropFlags

inherited

Each module can be tagged with property flags, which indicate certain features of the module.

Enumerator
c_Input	This module is an input module (reads data).
c_Output	This module is an output module (writes data).
c_ParallelProcessingCertified	This module can be run in parallel processing mode safely (All I/O must be done through the data store, in particular, the module must not write any files.)
c_HistogramManager	This module is used to manage histograms accumulated by other modules.
c_InternalSerializer	This module is an internal serializer/deserializer for parallel processing.
c_TerminateInAllProcesses	When using parallel processing, call this module's terminate() function in all processes(). This will also ensure that there is exactly one process (single-core if no parallel modules found) or at least one input, one main and one output process.
c_DontCollectStatistics	No statistics is collected for this module.

Definition at line 77 of file Module.h.

Member Function Documentation

◆ clone()

std::shared_ptr< PathElement > clone ( ) const

overridevirtualinherited

Create an independent copy of this module.

Note that parameters are shared, so changing them on a cloned module will also affect the original module.

Implements PathElement.

Definition at line 179 of file Module.cc.

◆ def_endRun()

virtual void def_endRun ( )

inlineprotectedvirtualinherited

This method can receive that the current run ends as a call from the Python side.

For regular C++-Modules that forwards the call to the regular endRun() method.

Reimplemented in PyModule.

Definition at line 439 of file Module.h.

◆ def_initialize()

virtual void def_initialize ( )

inlineprotectedvirtualinherited

Wrappers to make the methods without "def_" prefix callable from Python.

Overridden in PyModule. Wrapper method for the virtual function initialize() that has the implementation to be used in a call from Python.

Reimplemented in PyModule.

Definition at line 420 of file Module.h.

◆ evalCondition()

bool evalCondition ( ) const

inherited

If at least one condition was set, it is evaluated and true returned if at least one condition returns true.

If no condition or result value was defined, the method returns false. Otherwise, the condition is evaluated and true returned, if at least one condition returns true. To speed up the evaluation, the condition strings were already parsed in the method if_value().

Returns: True if at least one condition and return value exists and at least one condition expression was evaluated to true.

Definition at line 96 of file Module.cc.

◆ getAfterConditionPath()

Module::EAfterConditionPath getAfterConditionPath ( ) const

inherited

What to do after the conditional path is finished.

(defaults to c_End if no condition is set)

Definition at line 133 of file Module.cc.

◆ getConditionPath()

std::shared_ptr< Path > getConditionPath ( ) const

inherited

Returns the path of the last true condition (if there is at least one, else reaturn a null pointer).

Definition at line 113 of file Module.cc.

◆ getFileNames()

virtual std::vector<std::string> getFileNames ( bool outputFiles )

inlinevirtualinherited

Return a list of output filenames for this modules.

This will be called when basf2 is run with "--dry-run" if the module has set either the c_Input or c_Output properties.

If the parameter outputFiles is false (for modules with c_Input) the list of input filenames should be returned (if any). If outputFiles is true (for modules with c_Output) the list of output files should be returned (if any).

If a module has sat both properties this member is called twice, once for each property.

The module should return the actual list of requested input or produced output filenames (including handling of input/output overrides) so that the grid system can handle input/output files correctly.

This function should return the same value when called multiple times. This is especially important when taking the input/output overrides from Environment as they get consumed when obtained so the finalized list of output files should be stored for subsequent calls.

Reimplemented in RootOutputModule, StorageRootOutputModule, and RootInputModule.

Definition at line 134 of file Module.h.

◆ getName()

const std::string& getName ( ) const

inlineinherited

Returns the name of the module.

This can be changed via e.g. set_name() in the steering file to give more useful names if there is more than one module of the same type.

For identifying the type of a module, using getType() (or type() in Python) is recommended.

Definition at line 187 of file Module.h.

◆ getParamInfoListPython()

std::shared_ptr< boost::python::list > getParamInfoListPython ( ) const

inherited

Returns a python list of all parameters.

Each item in the list consists of the name of the parameter, a string describing its type, a python list of all default values and the description of the parameter.

Returns: A python list containing the parameters of this parameter list.

Definition at line 279 of file Module.cc.

◆ getReturnValue()

int getReturnValue ( ) const

inlineinherited

Return the return value set by this module.

This value is only meaningful if hasReturnValue() is true

Definition at line 381 of file Module.h.

◆ getType()

const std::string & getType ( ) const

inherited

Returns the type of the module (i.e.

class name minus 'Module')

Definition at line 41 of file Module.cc.

◆ hasProperties()

bool hasProperties ( unsigned int propertyFlags ) const

inherited

Returns true if all specified property flags are available in this module.

Parameters

propertyFlags Ored EModulePropFlags which should be compared with the module flags.

Definition at line 160 of file Module.cc.

◆ if_false()

void if_false	(	const std::shared_ptr< Path > &	path,
		EAfterConditionPath	afterConditionPath = `EAfterConditionPath::c_End`
	)

inherited

A simplified version to add a condition to the module.

Please note that successive calls of this function will add more than one condition to the module. If more than one condition results in true, only the last of them will be used.

Please be careful: Avoid creating cyclic paths, e.g. by linking a condition to a path which is processed before the path where this module is located in.

It is equivalent to the if_value() method, using the expression "<1". This method is meant to be used together with the setReturnValue(bool value) method.

Parameters

path	Shared pointer to the Path which will be executed if the return value is false.
afterConditionPath	What to do after executing 'path'.

Definition at line 85 of file Module.cc.

◆ if_true()

void if_true	(	const std::shared_ptr< Path > &	path,
		EAfterConditionPath	afterConditionPath = `EAfterConditionPath::c_End`
	)

inherited

A simplified version to set the condition of the module.

Please note that successive calls of this function will add more than one condition to the module. If more than one condition results in true, only the last of them will be used.

Please be careful: Avoid creating cyclic paths, e.g. by linking a condition to a path which is processed before the path where this module is located in.

It is equivalent to the if_value() method, using the expression ">=1". This method is meant to be used together with the setReturnValue(bool value) method.

Parameters

path	Shared pointer to the Path which will be executed if the return value is true.
afterConditionPath	What to do after executing 'path'.

Definition at line 90 of file Module.cc.

◆ if_value()

void if_value	(	const std::string &	expression,
		const std::shared_ptr< Path > &	path,
		EAfterConditionPath	afterConditionPath = `EAfterConditionPath::c_End`
	)

inherited

Add a condition to the module.

Please note that successive calls of this function will add more than one condition to the module. If more than one condition results in true, only the last of them will be used.

See https://confluence.desy.de/display/BI/Software+ModCondTut or ModuleCondition for a description of the syntax.

Please be careful: Avoid creating cyclic paths, e.g. by linking a condition to a path which is processed before the path where this module is located in.

Parameters

expression	The expression of the condition.
path	Shared pointer to the Path which will be executed if the condition is evaluated to true.
afterConditionPath	What to do after executing 'path'.

Definition at line 79 of file Module.cc.

◆ setDescription()

void setDescription ( const std::string & description )

protectedinherited

Sets the description of the module.

Parameters

description A description of the module.

Definition at line 214 of file Module.cc.

◆ setLogInfo()

void setLogInfo	(	int	logLevel,
		unsigned int	logInfo
	)

inherited

Configure the printed log information for the given level.

Parameters

logLevel	The log level (one of LogConfig::ELogLevel)
logInfo	What kind of info should be printed? ORed combination of LogConfig::ELogInfo flags.

Definition at line 73 of file Module.cc.

◆ setName()

void setName ( const std::string & name )

inlineinherited

Set the name of the module.

Note: The module name is set when using the REG_MODULE macro, but the module can be renamed before calling process() using the set_name() function in your steering file.

Parameters

name	The name of the module

Definition at line 214 of file Module.h.

◆ setParamPython()

void setParamPython	(	const std::string &	name,
		const boost::python::object &	pyObj
	)

privateinherited

Implements a method for setting boost::python objects.

The method supports the following types: list, dict, int, double, string, bool The conversion of the python object to the C++ type and the final storage of the parameter value is done in the ModuleParam class.

Parameters

name	The unique name of the parameter.
pyObj	The object which should be converted and stored as the parameter value.

Definition at line 234 of file Module.cc.

◆ setParamPythonDict()

void setParamPythonDict ( const boost::python::dict & dictionary )

privateinherited

Implements a method for reading the parameter values from a boost::python dictionary.

The key of the dictionary has to be the name of the parameter and the value has to be of one of the supported parameter types.

Parameters

dictionary The python dictionary from which the parameter values are read.

Definition at line 249 of file Module.cc.

◆ setPropertyFlags()

void setPropertyFlags ( unsigned int propertyFlags )

inherited

Sets the flags for the module properties.

Parameters

propertyFlags bitwise OR of EModulePropFlags

Definition at line 208 of file Module.cc.

◆ setReturnValue() [1/2]

void setReturnValue ( bool value )

protectedinherited

Sets the return value for this module as bool.

The bool value is saved as an integer with the convention 1 meaning true and 0 meaning false. The value can be used in the steering file to divide the analysis chain into several paths.

Parameters

value The value of the return value.

Definition at line 227 of file Module.cc.

◆ setReturnValue() [2/2]

void setReturnValue ( int value )

protectedinherited

Sets the return value for this module as integer.

The value can be used in the steering file to divide the analysis chain into several paths.

Parameters

value The value of the return value.

Definition at line 220 of file Module.cc.

◆ setType()

void setType ( const std::string & type )

protectedinherited

Set the module type.

Only for use by internal modules (which don't use the normal REG_MODULE mechanism).

Definition at line 48 of file Module.cc.

Member Data Documentation

◆ m_branch

std::vector<TBranch*> m_branch[4]

private

ntuple to store summary of gain using height distribution.

It will be merged to m_tree

Definition at line 138 of file TOPGainEfficiencyCalculatorModule.h.

◆ m_chargeHistogram

TH1D* m_chargeHistogram[c_NChannelPerPMT] = {}

private

pulse charge distribution, extracted from m_timeChargeHistogram as a projection along its y-axis with timing cut.

Used gain/efficiency calculation.

Definition at line 142 of file TOPGainEfficiencyCalculatorModule.h.

◆ m_fitoption

std::string m_fitoption

private

Initial value:

=

"L"

charge histograms fitting option.

type R for chisquare fit. type L for likelihood fit(default)

Definition at line 153 of file TOPGainEfficiencyCalculatorModule.h.

◆ m_hvDiff

short m_hvDiff = 0

private

HV difference from nominal HV value.

Use it when you analyze HV scan data.

Definition at line 159 of file TOPGainEfficiencyCalculatorModule.h.

◆ m_nCalPulseHistogram

TH1F* m_nCalPulseHistogram

private

Initial value:

=

0

histogram to store the number of events with calibration pulse(s) identified for each asic (1,024) in total

Definition at line 143 of file TOPGainEfficiencyCalculatorModule.h.

◆ m_outputPDFFile

std::string m_outputPDFFile

private

Initial value:

=

""

output PDF file to store plots of 2D histogram, timing, and charge distribution for each channel

Definition at line 150 of file TOPGainEfficiencyCalculatorModule.h.

◆ m_thresholdForIntegral

float m_thresholdForIntegral

private

Initial value:

=

550

pulse integral threshold, which defines lower limit of fit region and efficiency calculation

Definition at line 163 of file TOPGainEfficiencyCalculatorModule.h.

◆ m_timeHistogram

TH1D* m_timeHistogram[c_NChannelPerPMT] = {}

private

hit timing distribution, extracted from m_timeChargeHistogram as a projection along its x-axis.

Used to define direct laser photon hit timing

Definition at line 141 of file TOPGainEfficiencyCalculatorModule.h.

The documentation for this class was generated from the following files:

top/modules/TOPGainEfficiencyMonitor/include/TOPGainEfficiencyCalculatorModule.h
top/modules/TOPGainEfficiencyMonitor/src/TOPGainEfficiencyCalculatorModule.cc

Public Types

Public Member Functions

Static Public Member Functions

Protected Member Functions

Private Member Functions

Private Attributes

Detailed Description

Member Enumeration Documentation

◆ EHistogramType

◆ EModulePropFlags

Member Function Documentation

◆ clone()

◆ def_endRun()

◆ def_initialize()

◆ evalCondition()

◆ getAfterConditionPath()

◆ getConditionPath()

◆ getFileNames()

◆ getName()

◆ getParamInfoListPython()

◆ getReturnValue()

◆ getType()

◆ hasProperties()

◆ if_false()

◆ if_true()

◆ if_value()

◆ setDescription()

◆ setLogInfo()

◆ setName()

◆ setParamPython()

◆ setParamPythonDict()

◆ setPropertyFlags()

◆ setReturnValue() [1/2]

◆ setReturnValue() [2/2]

◆ setType()

Member Data Documentation

◆ m_branch

◆ m_chargeHistogram

◆ m_fitoption

◆ m_hvDiff

◆ m_nCalPulseHistogram

◆ m_outputPDFFile

◆ m_thresholdForIntegral

◆ m_timeHistogram