The creator for the VXD geometry of the Belle II detector. More...

#include <GeoVXDCreator.h>

Inheritance diagram for GeoVXDCreator:

[legend]

Collaboration diagram for GeoVXDCreator:

[legend]

Public Member Functions
	GeoVXDCreator (const std::string &prefix)
	Constructor of the GeoVXDCreator class.

virtual	~GeoVXDCreator ()
	The destructor of the GeoVXDCreator class.

virtual SensorInfoBase *	createSensorInfo (const VXDGeoSensorPar &sensor)=0
	Read the sensor definitions from the database. More...

virtual SensitiveDetectorBase *	createSensitiveDetector (VxdID sensorID, const VXDGeoSensor &sensor, const VXDGeoSensorPlacement &placement)=0
	Return a SensitiveDetector implementation for a given sensor. More...

virtual void	setCurrentLayer (int layer, const VXDGeometryPar &parameters)
	Read parameters for given layer and store in m_ladder.

G4Transform3D	placeLadder (int ladderID, double phi, G4LogicalVolume *volume, const G4Transform3D &placement, const VXDGeometryPar &parameters)
	Place ladder corresponding to the given ladder id into volume setLayer has to be called first to set the correct layer id.

G4Transform3D	getPosition (const VXDGeoComponent &mother, const VXDGeoComponent &daughter, const VXDGeoPlacement &placement, bool originCenter)
	Return the position where a daughter component is to be placed. More...

G4Transform3D	getAlignment (const VXDAlignmentPar &params)
	Get Alignment from paylead object. More...

GeoVXDAssembly	createSubComponents (const std::string &name, VXDGeoComponent &component, std::vector< VXDGeoPlacement > placements, bool originCenter=true, bool allowOutside=false)
	Place a list of subcomponents into an component. More...

G4VSolid *	createTrapezoidal (const std::string &name, double width, double width2, double length, double &height, double angle=0)
	Create a trapezoidal solid. More...

void	createDiamonds (const VXDGeoRadiationSensorsPar &params, G4LogicalVolume &topVolume, G4LogicalVolume &envelopeVolume)
	Create diamond radiation sensors.

std::vector< VXDGeoPlacementPar >	getSubComponents (const GearDir &path)
	Return vector of VXDGeoPlacements with all the components defined inside a given path.

virtual void	readLadder (int layer, GearDir components, VXDGeometryPar &geoparameters)
	Read parameters for a ladder in layer with given ID from gearbox and layer store them in payload.

virtual void	readLadderComponents (int layerID, int ladderID, GearDir content, VXDGeometryPar &vxdGeometryPar)
	Read parameters for ladder components and their alignment corresponding to the given ladder id.

void	readComponent (const std::string &name, GearDir components, VXDGeometryPar &vxdGeometryPar)
	Read parameters for component name from Gearbox into geometry payload. More...

void	readSubComponents (const std::vector< VXDGeoPlacementPar > &placements, const GearDir &componentsDir, VXDGeometryPar &vxdGeometryPar)
	Read parameters for all components in placement container from Gearbox into payload. More...

	BELLE2_DEFINE_EXCEPTION (DBNotImplemented, "Cannot create geometry from Database.")
	Exception that will be thrown in createFromDB if member is not yet implemented by creator.

virtual void	create (const GearDir &content, G4LogicalVolume &topVolume, GeometryTypes type)=0
	Function to actually create the geometry, has to be overridden by derived classes. More...

virtual void	createFromDB (const std::string &name, G4LogicalVolume &topVolume, GeometryTypes type)
	Function to create the geometry from the Database. More...

virtual void	createPayloads (const GearDir &content, const IntervalOfValidity &iov)
	Function to create the geometry database. More...

Protected Attributes
std::string	m_prefix
	Prefix to prepend to all volume names.

GearDir	m_alignment
	GearDir pointing to the alignment parameters.

GearDir	m_components
	GearDir pointing to the toplevel of the components.

std::map< std::string, VXDGeoComponent >	m_componentCache
	Cache of all previously created components.

std::map< std::string, VXDGeoSensor >	m_sensorMap
	Map containing Information about all defined sensor types.

VXDGeoLadder	m_ladder
	Parameters of the currently active ladder.

std::vector< Simulation::SensitiveDetectorBase * >	m_sensitive
	List to all created sensitive detector instances.

GeoVXDRadiationSensors	m_radiationsensors
	Diamond radiation sensor "sub creator".

std::string	m_defaultMaterial
	Name of the Material to be used for Air.

float	m_distanceTolerance {(float)(5 * Unit::um)}
	tolerance for Geant4 steps to be merged to a single step

float	m_electronTolerance {100}
	tolerance for the energy deposition in electrons to be merged in a single step

float	m_minimumElectrons {10}
	minimum number of electrons to be deposited by a particle to be saved

double	m_activeStepSize {5 * Unit::um}
	Stepsize to be used inside active volumes.

bool	m_activeChips {false}
	Make also chips sensitive.

bool	m_seeNeutrons {false}
	Make sensitive detectors also see neutrons.

bool	m_onlyPrimaryTrueHits {false}
	If true only create TrueHits from primary particles and ignore secondaries.

bool	m_onlyActiveMaterial {false}
	If this is true, only active Materials will be placed for tracking studies. More...

std::vector< G4UserLimits * >	m_UserLimits
	Vector of G4UserLimit pointers.

std::string	m_currentHalfShell {""}
	Current half-shell being processed (need to know ladder parent for hierarchy)

std::map< std::string, Belle2::VxdID >	m_halfShellVxdIDs
	Used for translation of half-shell name into a VxdID to consitently handle it in hierarchy. More...

Detailed Description

The creator for the VXD geometry of the Belle II detector.

Definition at line 48 of file GeoVXDCreator.h.

Member Function Documentation

◆ create()

virtual void create	(	const GearDir &	content,
		G4LogicalVolume &	topVolume,
		GeometryTypes	type
	)

pure virtualinherited

Function to actually create the geometry, has to be overridden by derived classes.

Parameters

content	GearDir pointing to the parameters which should be used for construction
topVolume	Top volume in which the geometry has to be placed
type	Type of geometry to be build

Implemented in AWESOMEGeometryCreator, GeoVXDServiceCreator, GeoHeavyMetalShieldCreator, GeoTOPCreator, GeoSVDCreator, GeoSTRCreator, GeoServiceMaterialCreator, GeoCOILCreator, GeoPXDCreator, GeoKLMCreator, GeoEKLMCreator, GeoBKLMCreator, GeoFarBeamLineCreator, GeoCryostatCreator, GeoBeamPipeCreator, MyDBCreator, GeoMagneticField, GeoECLCreator, GeoCDCCreatorReducedCDC, GeoCDCCreator, BeamabortCreator, GeoARICHCreator, SddCreator, Fei4Creator, DiamondCreator, QcsmonitorCreator, PlumeCreator, PindiodeCreator, Ph1sustrCreator, Ph1bpipeCreator, MicrotpcCreator, He3tubeCreator, FANGSCreator, DosiCreator, CsiCreator, CLAWSCreator, ClawCreator, CaveCreator, BgoCreator, and GeoARICHBtestCreator.

◆ createFromDB()

void createFromDB	(	const std::string &	name,
		G4LogicalVolume &	topVolume,
		GeometryTypes	type
	)

virtualinherited

Function to create the geometry from the Database.

Parameters

name	name of the component in the database, could be used to disambiguate multiple components created with the same creator
topVolume	Top volume in which the geometry has to be placed
type	Type of geometry to be build

Reimplemented in GeoVXDServiceCreator, GeoHeavyMetalShieldCreator, GeoTOPCreator, GeoSVDCreator, GeoSTRCreator, GeoServiceMaterialCreator, GeoCOILCreator, GeoPXDCreator, GeoKLMCreator, GeoEKLMCreator, GeoBKLMCreator, GeoFarBeamLineCreator, GeoCryostatCreator, GeoBeamPipeCreator, MyDBCreator, GeoECLCreator, GeoCDCCreatorReducedCDC, GeoCDCCreator, BeamabortCreator, GeoARICHCreator, and GeoMagneticField.

Definition at line 17 of file CreatorBase.cc.

◆ createPayloads()

void createPayloads	(	const GearDir &	content,
		const IntervalOfValidity &	iov
	)

virtualinherited

Function to create the geometry database.

This function should be implemented to convert Gearbox parameters to one ore more database payloads

Parameters

content	GearDir pointing to the parameters which should be used for construction
iov	interval of validity to use when generating payloads

Reimplemented in GeoVXDServiceCreator, GeoHeavyMetalShieldCreator, GeoTOPCreator, GeoSVDCreator, GeoSTRCreator, GeoServiceMaterialCreator, GeoCOILCreator, GeoPXDCreator, GeoKLMCreator, GeoEKLMCreator, GeoBKLMCreator, GeoFarBeamLineCreator, GeoCryostatCreator, GeoBeamPipeCreator, MyDBCreator, GeoMagneticField, GeoECLCreator, GeoCDCCreatorReducedCDC, GeoCDCCreator, BeamabortCreator, and GeoARICHCreator.

Definition at line 24 of file CreatorBase.cc.

◆ createSensitiveDetector()

virtual SensitiveDetectorBase* createSensitiveDetector	(	VxdID	sensorID,
		const VXDGeoSensor &	sensor,
		const VXDGeoSensorPlacement &	placement
	)

pure virtual

Return a SensitiveDetector implementation for a given sensor.

Parameters

sensorID	SensorID for the sensor
sensor	Information about the sensor to create the Sensitive Detector for
placement	Placement of the sensor

Implemented in GeoSVDCreator, and GeoPXDCreator.

◆ createSensorInfo()

virtual SensorInfoBase* createSensorInfo ( const VXDGeoSensorPar & sensor )

pure virtual

Read the sensor definitions from the database.

Parameters

sensor Reference to the database containing the parameters

Implemented in GeoSVDCreator, and GeoPXDCreator.

◆ createSubComponents()

GeoVXDAssembly createSubComponents	(	const std::string &	name,
		VXDGeoComponent &	component,
		std::vector< VXDGeoPlacement >	placements,
		bool	originCenter = `true`,
		bool	allowOutside = `false`
	)

Place a list of subcomponents into an component.

If the volume of the given component is NULL, a new container will be created to fit all subcomponents. It will have air as medium. If at least one subcomponent with this placement is found the whole component is wrapped in a container volume with Air medium which extends above and below to fit the subcomponents

Parameters

name	Name for the potential new volume or as prefix for the container to extend the component
component	Component to fit the subcomponents into
placements	Placement information for all subcomponents
originCenter	bool
allowOutside	bool

Returns: offset in w which was applied to the component when extending it

Definition at line 74 of file GeoVXDCreator.cc.

◆ createTrapezoidal()

G4VSolid * createTrapezoidal	(	const std::string &	name,
		double	width,
		double	width2,
		double	length,
		double &	height,
		double	angle = `0`
	)

Create a trapezoidal solid.

Parameters

	name	name of the Geant4 solid
	width	full forward width of the shape in mm
	width2	full backward width of the shape in mm
	length	length of the shape in mm
[in,out]	height	of the shape in mm. If angle is not 0 this value might be changed if the actual height will be smaller due to the slanted edges
	angle	angle of the sides along w with respect to to the uv plane. 0 means normal box shaped, !=0 means the upper endcap of the solid will be smaller since all edges will be slanted by angle

Returns: A G4VShape which could be a G4Box, a G4Trd or a G4Trap depending on the parameters

Definition at line 254 of file GeoVXDCreator.cc.

◆ getAlignment()

G4Transform3D getAlignment ( const VXDAlignmentPar & params )

Get Alignment from paylead object.

Parameters

params Payload object

Returns: Transformation matrix for component

Definition at line 172 of file GeoVXDCreator.cc.

◆ getPosition()

G4Transform3D getPosition	(	const VXDGeoComponent &	mother,
		const VXDGeoComponent &	daughter,
		const VXDGeoPlacement &	placement,
		bool	originCenter
	)

Return the position where a daughter component is to be placed.

Parameters

mother	Mother component
daughter	Daughter component
placement	VXDGeoPlacement
originCenter	bool

Returns: Transformation matrix to place the daughter relative to the origin to the mother

Definition at line 179 of file GeoVXDCreator.cc.

◆ readComponent()

void readComponent	(	const std::string &	name,
		GearDir	components,
		VXDGeometryPar &	vxdGeometryPar
	)

Read parameters for component name from Gearbox into geometry payload.

The name is assumed to be unique and Volumes are cached.

Parameters

name	Name of the component
components	Path to components
vxdGeometryPar	VXD geometry parameters

Definition at line 532 of file GeoVXDCreator.cc.

◆ readSubComponents()

void readSubComponents	(	const std::vector< VXDGeoPlacementPar > &	placements,
		const GearDir &	componentsDir,
		VXDGeometryPar &	vxdGeometryPar
	)

Read parameters for all components in placement container from Gearbox into payload.

Parameters

placements	container holding names of all components to be cached
componentsDir	Path to Gearbox where parameters are to be found
vxdGeometryPar

Definition at line 523 of file GeoVXDCreator.cc.

Member Data Documentation

◆ m_halfShellVxdIDs

std::map<std::string, Belle2::VxdID> m_halfShellVxdIDs

protected

Initial value:

{
        {{"PXD.Ying"}, {Belle2::VxdID(1, 0, 0, 1)}},
        {{"PXD.Yang"}, {Belle2::VxdID(1, 0, 0, 2)}},
        {{"SVD.Pat"}, {Belle2::VxdID(3, 0, 0, 1)}},
        {{"SVD.Mat"}, {Belle2::VxdID(3, 0, 0, 2)}}
      }

Used for translation of half-shell name into a VxdID to consitently handle it in hierarchy.

Definition at line 222 of file GeoVXDCreator.h.

◆ m_onlyActiveMaterial

bool m_onlyActiveMaterial {false}

protected

If this is true, only active Materials will be placed for tracking studies.

Dead Material will be ignored

Definition at line 216 of file GeoVXDCreator.h.

The documentation for this class was generated from the following files:

vxd/geometry/include/GeoVXDCreator.h
vxd/geometry/src/GeoVXDCreator.cc

Public Member Functions

Protected Attributes

Detailed Description

Member Function Documentation

◆ create()

◆ createFromDB()

◆ createPayloads()

◆ createSensitiveDetector()

◆ createSensorInfo()

◆ createSubComponents()

◆ createTrapezoidal()

◆ getAlignment()

◆ getPosition()

◆ readComponent()

◆ readSubComponents()

Member Data Documentation

◆ m_halfShellVxdIDs

◆ m_onlyActiveMaterial