The full Geant4 simulation module. More...

#include <FullSimModule.h>

Inheritance diagram for FullSimModule:

Collaboration diagram for FullSimModule:

[legend]

Public Types
enum	EModulePropFlags { c_Input = 1 , c_Output = 2 , c_ParallelProcessingCertified = 4 , c_HistogramManager = 8 , c_InternalSerializer = 16 , c_TerminateInAllProcesses = 32 , c_DontCollectStatistics = 64 }
	Each module can be tagged with property flags, which indicate certain features of the module. More...

typedef ModuleCondition::EAfterConditionPath	EAfterConditionPath
	Forward the EAfterConditionPath definition from the ModuleCondition.

Public Member Functions
	FullSimModule ()
	Constructor of the module. More...

virtual	~FullSimModule ()
	Destructor of the module.

virtual void	initialize () override
	Initialize the Module. More...

virtual void	beginRun () override
	Called when a new run is started. More...

virtual void	event () override
	Performs the full Geant4 simulation.

virtual void	endRun () override
	Called when run has ended.

virtual void	terminate () override
	Terminates the module.

virtual std::vector< std::string >	getFileNames (bool outputFiles)
	Return a list of output filenames for this modules. More...

const std::string &	getName () const
	Returns the name of the module. More...

const std::string &	getType () const
	Returns the type of the module (i.e. More...

const std::string &	getPackage () const
	Returns the package this module is in.

const std::string &	getDescription () const
	Returns the description of the module.

void	setName (const std::string &name)
	Set the name of the module. More...

void	setPropertyFlags (unsigned int propertyFlags)
	Sets the flags for the module properties. More...

LogConfig &	getLogConfig ()
	Returns the log system configuration.

void	setLogConfig (const LogConfig &logConfig)
	Set the log system configuration.

void	setLogLevel (int logLevel)
	Configure the log level.

void	setDebugLevel (int debugLevel)
	Configure the debug messaging level.

void	setAbortLevel (int abortLevel)
	Configure the abort log level.

void	setLogInfo (int logLevel, unsigned int logInfo)
	Configure the printed log information for the given level. More...

void	if_value (const std::string &expression, const std::shared_ptr< Path > &path, EAfterConditionPath afterConditionPath=EAfterConditionPath::c_End)
	Add a condition to the module. More...

void	if_false (const std::shared_ptr< Path > &path, EAfterConditionPath afterConditionPath=EAfterConditionPath::c_End)
	A simplified version to add a condition to the module. More...

void	if_true (const std::shared_ptr< Path > &path, EAfterConditionPath afterConditionPath=EAfterConditionPath::c_End)
	A simplified version to set the condition of the module. More...

bool	hasCondition () const
	Returns true if at least one condition was set for the module.

const ModuleCondition *	getCondition () const
	Return a pointer to the first condition (or nullptr, if none was set)

const std::vector< ModuleCondition > &	getAllConditions () const
	Return all set conditions for this module.

bool	evalCondition () const
	If at least one condition was set, it is evaluated and true returned if at least one condition returns true. More...

std::shared_ptr< Path >	getConditionPath () const
	Returns the path of the last true condition (if there is at least one, else reaturn a null pointer). More...

Module::EAfterConditionPath	getAfterConditionPath () const
	What to do after the conditional path is finished. More...

std::vector< std::shared_ptr< Path > >	getAllConditionPaths () const
	Return all condition paths currently set (no matter if the condition is true or not).

bool	hasProperties (unsigned int propertyFlags) const
	Returns true if all specified property flags are available in this module. More...

bool	hasUnsetForcedParams () const
	Returns true and prints error message if the module has unset parameters which the user has to set in the steering file.

const ModuleParamList &	getParamList () const
	Return module param list.

template<typename T >
ModuleParam< T > &	getParam (const std::string &name) const
	Returns a reference to a parameter. More...

bool	hasReturnValue () const
	Return true if this module has a valid return value set.

int	getReturnValue () const
	Return the return value set by this module. More...

std::shared_ptr< PathElement >	clone () const override
	Create an independent copy of this module. More...

std::shared_ptr< boost::python::list >	getParamInfoListPython () const
	Returns a python list of all parameters. More...

Static Public Member Functions
static void	exposePythonAPI ()
	Exposes methods of the Module class to Python.

Protected Member Functions
virtual void	def_initialize ()
	Wrappers to make the methods without "def_" prefix callable from Python. More...

virtual void	def_beginRun ()
	Wrapper method for the virtual function beginRun() that has the implementation to be used in a call from Python.

virtual void	def_event ()
	Wrapper method for the virtual function event() that has the implementation to be used in a call from Python.

virtual void	def_endRun ()
	This method can receive that the current run ends as a call from the Python side. More...

virtual void	def_terminate ()
	Wrapper method for the virtual function terminate() that has the implementation to be used in a call from Python.

void	setDescription (const std::string &description)
	Sets the description of the module. More...

void	setType (const std::string &type)
	Set the module type. More...

template<typename T >
void	addParam (const std::string &name, T &paramVariable, const std::string &description, const T &defaultValue)
	Adds a new parameter to the module. More...

template<typename T >
void	addParam (const std::string &name, T &paramVariable, const std::string &description)
	Adds a new enforced parameter to the module. More...

void	setReturnValue (int value)
	Sets the return value for this module as integer. More...

void	setReturnValue (bool value)
	Sets the return value for this module as bool. More...

void	setParamList (const ModuleParamList &params)
	Replace existing parameter list.

Protected Attributes
std::string	m_mcParticleInputColName
	The parameter variable for the name of the input MCParticle collection.

double	m_thresholdImportantEnergy
	A particle which got 'stuck' and has less than this energy will be killed after m_thresholdTrials trials.

int	m_thresholdTrials
	Geant4 will try m_thresholdTrials times to move a particle which got 'stuck' and has an energy less than m_thresholdImportantEnergy.

int	m_runEventVerbosity
	Geant4 run/event verbosity: 0=Silent; 1=info level; 2=debug level, default=0.

int	m_trackingVerbosity
	Tracking verbosity: 0=Silent; 1=Min info per step; 2=sec particles; 3=pre/post step info; 4=like 3 but more info; 5=proposed step length info.

int	m_hadronProcessVerbosity
	Hadron Process verbosity: 0=Silent; 1=info level; 2=debug level, default=0.

int	m_emProcessVerbosity
	Loss Table verbosity: 0=Silent; 1=info level; 2=debug level, default=0.

std::string	m_physicsList
	The name of the physics list which is used for the simulation.

bool	m_standardEM
	If set to true, replaces fast EM physics with standard EM physics.

bool	m_optics
	If set to true, registers the optical physics list.

bool	m_HPneutrons
	If true, high precision neutron models used below 20 MeV.

bool	m_monopoles
	If set to true, G4MonopolePhysics is registered in Geant4 PhysicsList.

double	m_monopoleMagneticCharge
	The value of monopole magnetic charge in units of e+.

double	m_productionCut
	Apply continuous energy loss to primary particle which has no longer enough energy to produce secondaries which travel at least the specified productionCut distance.

double	m_pxdProductionCut
	Secondary production threshold in PXD envelope.

double	m_svdProductionCut
	Secondary production threshold in SVD envelope.

double	m_cdcProductionCut
	Secondary production threshold in CDC envelope.

double	m_arichtopProductionCut
	Secondary production threshold in ARICH and TOP envelopes.

double	m_eclProductionCut
	Secondary production threshold in ECL envelopes.

double	m_klmProductionCut
	Secondary production threshold in BKLM and EKLM envelopes.

int	m_maxNumberSteps
	The maximum number of steps before the track transportation is stopped and the track is killed.

double	m_photonFraction
	The fraction of Cerenkov photons which will be kept and propagated.

bool	m_useNativeGeant4
	If set to true, uses the Geant4 navigator and native detector construction class.

std::vector< std::string >	m_uiCommandsAtPreInit
	A list of Geant4 UI commands that should be applied at PreInit state, before the Geant4 initialization and before the simulation starts.

std::vector< std::string >	m_uiCommandsAtIdle
	A list of Geant4 UI commands that should be applied at Idle state, after the Geant4 initialization and before the simulation starts.

bool	m_EnableVisualization
	If set to true the Geant4 visualization support is enabled.

bool	m_storeOpticalPhotons
	controls storing of optical photons in MCParticles

bool	m_storeSecondaries
	controls storing of Geant secondaries in MCParticles

double	m_secondariesEnergyCut
	kinetic energy cut for the stored Geant secondaries

bool	m_storeBremsstrahlungPhotons
	controls storing of bremsstrahlung photons in MCParticles

double	m_bremsstrahlungPhotonsEnergyCut
	kinetic energy cut for the stored bremsstrahlung photons

bool	m_storePairConversions
	controls storing of e+ or e- from pair conversions in MCParticles

double	m_pairConversionsEnergyCut
	kinetic energy cut for the stored e+ or e- from pair conversions

std::string	m_magneticFieldName
	magnetic field stepper to use

double	m_magneticCacheDistance
	minimal distance for magnetic field lookup. More...

double	m_deltaChordInMagneticField
	The maximum miss-distance between the trajectory curve and its linear chord(s) approximation.

int	m_trajectoryStore
	If true, store the trajectories of all primary particles.

double	m_trajectoryDistanceTolerance
	Maximum distance to actuall trajectory when merging points.

std::vector< float >	m_absorbers
	The absorbers defined at given radii where tracks across them will be destroyed. More...

Private Member Functions
std::list< ModulePtr >	getModules () const override
	no submodules, return empty list

std::string	getPathString () const override
	return the module name.

void	setParamPython (const std::string &name, const boost::python::object &pyObj)
	Implements a method for setting boost::python objects. More...

void	setParamPythonDict (const boost::python::dict &dictionary)
	Implements a method for reading the parameter values from a boost::python dictionary. More...

Private Attributes
MCParticleGraph	m_mcParticleGraph
	The MCParticle Graph used to manage the MCParticles before and after the simulation.

G4MagneticField *	m_uncachedField
	Pointer to the uncached magnetic field (might be superseded by its cached version)

G4MagneticField *	m_magneticField
	Pointer to the (un)cached magnetic field.

G4Mag_UsualEqRhs *	m_magFldEquation
	Pointer to the equation of motion in the magnetic field (if not the default)

G4MagIntegratorStepper *	m_stepper
	Pointer to the equation-of-motion stepper (if not the default)

G4ChordFinder *	m_chordFinder
	Pointer to the equation-of-motion chord finder (if not the default)

G4VisManager *	m_visManager
	Pointer to the visualization manager (if used)

G4StepLimiter *	m_stepLimiter
	Pointer to the step limiter.

std::string	m_name
	The name of the module, saved as a string (user-modifiable)

std::string	m_type
	The type of the module, saved as a string.

std::string	m_package
	Package this module is found in (may be empty).

std::string	m_description
	The description of the module.

unsigned int	m_propertyFlags
	The properties of the module as bitwise or (with \|) of EModulePropFlags.

LogConfig	m_logConfig
	The log system configuration of the module.

ModuleParamList	m_moduleParamList
	List storing and managing all parameter of the module.

bool	m_hasReturnValue
	True, if the return value is set.

int	m_returnValue
	The return value.

std::vector< ModuleCondition >	m_conditions
	Module condition, only non-null if set.

Detailed Description

The full Geant4 simulation module.

This module provides the full Geant4 simulation for the framework. It initializes Geant4, calls the converter to translate the ROOT TGeo volumes/materials to native Geant4 volumes/materials, initializes the physics processes and user actions.

This module requires a valid geometry in memory (gGeoManager). Therefore, a geometry building module should have been executed before this module is called.

Definition at line 42 of file FullSimModule.h.

Member Enumeration Documentation

◆ EModulePropFlags

enum EModulePropFlags

inherited

Each module can be tagged with property flags, which indicate certain features of the module.

Enumerator
c_Input	This module is an input module (reads data).
c_Output	This module is an output module (writes data).
c_ParallelProcessingCertified	This module can be run in parallel processing mode safely (All I/O must be done through the data store, in particular, the module must not write any files.)
c_HistogramManager	This module is used to manage histograms accumulated by other modules.
c_InternalSerializer	This module is an internal serializer/deserializer for parallel processing.
c_TerminateInAllProcesses	When using parallel processing, call this module's terminate() function in all processes(). This will also ensure that there is exactly one process (single-core if no parallel modules found) or at least one input, one main and one output process.
c_DontCollectStatistics	No statistics is collected for this module.

Definition at line 77 of file Module.h.

Constructor & Destructor Documentation

◆ FullSimModule()

FullSimModule ( )

Constructor of the module.

Sets the description of the module.

Definition at line 72 of file FullSimModule.cc.

                              : Module(), m_useNativeGeant4(true)
 {
   //Set module properties and the description
   setDescription("Performs the full Geant4 detector simulation. Requires a valid geometry in memory.");
   setPropertyFlags(c_ParallelProcessingCertified | c_TerminateInAllProcesses);
  
   //Parameter definition
   addParam("InputMCParticleCollection", m_mcParticleInputColName, "The name of the input MCParticle collection.", string(""));
   addParam("ThresholdImportantEnergy", m_thresholdImportantEnergy,
            "[GeV] A particle which got 'stuck' and has less than this energy will be killed after 'ThresholdTrials' trials.", 0.250);
   addParam("ThresholdTrials", m_thresholdTrials,
            "Geant4 will try 'ThresholdTrials' times to move a particle which got 'stuck' and has an energy less than 'ThresholdImportantEnergy'.",
            10);
   addParam("RunEventVerbosity", m_runEventVerbosity, "Geant4 run/event verbosity: 0=silent; 1=info level; 2=debug level", 0);
   addParam("TrackingVerbosity", m_trackingVerbosity,
            "Tracking verbosity: 0=Silent; 1=Min info per step; 2=sec particles; 3=pre/post step info; 4=like 3 but more info; 5=proposed step length info.",
            0);
   addParam("HadronProcessVerbosity", m_hadronProcessVerbosity, "Hadron Process verbosity: 0=Silent; 1=info level; 2=debug level", 0);
   addParam("EmProcessVerbosity", m_emProcessVerbosity, "Em Process verbosity: 0=Silent; 1=info level; 2=debug level", 0);
   addParam("PhysicsList", m_physicsList, "The name of the physics list which is used for the simulation.", string("Belle2"));
   addParam("StandardEM", m_standardEM, "If true, replaces fast EM physics with standard EM physics.", false);
   addParam("RegisterOptics", m_optics, "If true, G4OpticalPhysics is registered in Geant4 PhysicsList.", true);
   addParam("UseHighPrecisionNeutrons", m_HPneutrons, "If true, high precision neutron models used below 20 MeV.", false);
   addParam("RegisterMonopoles", m_monopoles, "If set to true, G4MonopolePhysics is registered in Geant4 PhysicsList.", false);
   addParam("MonopoleMagCharge", m_monopoleMagneticCharge, "The value of monopole magnetic charge in units of e+.", 1.0);
   addParam("ProductionCut", m_productionCut,
            "[cm] Apply continuous energy loss to primary particle which has no longer enough energy to produce secondaries which travel at least the specified productionCut distance.",
            0.07);
   addParam("PXDProductionCut", m_pxdProductionCut, "[cm] Secondary production threshold in PXD envelope.", 0.0);
   addParam("SVDProductionCut", m_svdProductionCut, "[cm] Secondary production threshold in SVD envelope.", 0.0);
   addParam("CDCProductionCut", m_cdcProductionCut, "[cm] Secondary production threshold in CDC envelope.", 0.0);
   addParam("ARICHTOPProductionCut", m_arichtopProductionCut, "[cm] Secondary production threshold in ARICH and TOP envelopes.", 0.02);
   addParam("ECLProductionCut", m_eclProductionCut, "[cm] Secondary production threshold in ECL envelope.", 0.0);
   addParam("KLMProductionCut", m_klmProductionCut, "[cm] Secondary production threshold in BKLM and EKLM envelopes.", 0.0);
   addParam("MaxNumberSteps", m_maxNumberSteps,
            "The maximum number of steps before the track transportation is stopped and the track is killed.", 100000);
   addParam("PhotonFraction", m_photonFraction, "The fraction of Cerenkov photons which will be kept and propagated.", 0.5);
   addParam("EnableVisualization", m_EnableVisualization, "If set to True, the Geant4 visualization support is enabled.", false);
  
   addParam("StoreOpticalPhotons", m_storeOpticalPhotons, "If set to True, optical photons are stored in MCParticles.", false);
   addParam("StoreAllSecondaries", m_storeSecondaries,
            "If set to True, all secondaries produced by Geant4 over a kinetic energy cut are stored in MCParticles. Otherwise do not store them.",
            false);
   addParam("SecondariesEnergyCut", m_secondariesEnergyCut, "[MeV] Kinetic energy cut for storing secondaries", 1.0);
   addParam("StoreBremsstrahlungPhotons", m_storeBremsstrahlungPhotons,
            "If set to True, store BremsstrahlungPhotons over a kinetic energy cut in MCParticles. Otherwise do not store them.", false);
   addParam("BremsstrahlungPhotonsEnergyCut", m_bremsstrahlungPhotonsEnergyCut,
            "[MeV] Kinetic energy cut for storing bremsstrahlung photons", 10.0);
   addParam("StorePairConversions", m_storePairConversions,
            "If set to True, store e+ or e- from pair conversions over a kinetic energy cut in MCParticles. Otherwise do not store them.",
            false);
   addParam("PairConversionsEnergyCut", m_pairConversionsEnergyCut,
            "[MeV] Kinetic energy cut for storing e+ or e- from pair conversions", 10.0);
  
   addParam("magneticField", m_magneticFieldName,
            "Chooses the magnetic field stepper used by Geant4. Possible values are: default, nystrom, expliciteuler, simplerunge",
            string("default"));
   addParam("magneticCacheDistance", m_magneticCacheDistance,
            "Minimum distance for BField lookup in cm. If the next requested point is closer than this distance than return the flast BField value. 0 means no caching",
            0.0);
   addParam("deltaChordInMagneticField", m_deltaChordInMagneticField,
            "[mm] The maximum miss-distance between the trajectory curve and its linear cord(s) approximation", 0.25);
   vector<string> defaultCommandsAtPreInit;
   addParam("UICommandsAtPreInit", m_uiCommandsAtPreInit,
            "A list of Geant4 UI commands that should be applied at PreInit state, before the simulation starts.",
            defaultCommandsAtPreInit);
   vector<string> defaultCommandsAtIdle;
   addParam("UICommandsAtIdle", m_uiCommandsAtIdle,
            "A list of Geant4 UI commands that should be applied at Idle state, before the simulation starts.",
            defaultCommandsAtIdle);
   addParam("trajectoryStore", m_trajectoryStore,
            "If non-zero save the full trajectory of 1=primary, 2=non-optical or 3=all particles", 0);
   addParam("trajectoryDistanceTolerance", m_trajectoryDistanceTolerance,
            "Maximum deviation from the real trajectory points when merging "
            "segments (in cm)", 5e-4);
   vector<float> defaultAbsorbers;
   addParam("AbsorbersRadii", m_absorbers,
            "Radii (in cm) of absorbers across which tracks will be destroyed.", defaultAbsorbers);
  
   //Make sure the instance of the run manager is created now to initialize some stuff we need for geometry
   RunManager::Instance();
   m_magneticField = NULL;
   m_uncachedField = NULL;
   m_magFldEquation = NULL;
   m_stepper = NULL;
   m_chordFinder = NULL;
   m_visManager = NULL;
   m_stepLimiter = NULL;
 }

Member Function Documentation

◆ beginRun()

void beginRun ( void )

overridevirtual

Called when a new run is started.

Initializes the Geant4 run manager and sets the run number in Geant4.

Reimplemented from Module.

Definition at line 443 of file FullSimModule.cc.

◆ clone()

std::shared_ptr< PathElement > clone ( ) const

overridevirtualinherited

Create an independent copy of this module.

Note that parameters are shared, so changing them on a cloned module will also affect the original module.

Implements PathElement.

Definition at line 179 of file Module.cc.

◆ def_endRun()

virtual void def_endRun ( )

inlineprotectedvirtualinherited

This method can receive that the current run ends as a call from the Python side.

For regular C++-Modules that forwards the call to the regular endRun() method.

Reimplemented in PyModule.

Definition at line 439 of file Module.h.

◆ def_initialize()

virtual void def_initialize ( )

inlineprotectedvirtualinherited

Wrappers to make the methods without "def_" prefix callable from Python.

Overridden in PyModule. Wrapper method for the virtual function initialize() that has the implementation to be used in a call from Python.

Reimplemented in PyModule.

Definition at line 420 of file Module.h.

◆ evalCondition()

bool evalCondition ( ) const

inherited

If at least one condition was set, it is evaluated and true returned if at least one condition returns true.

If no condition or result value was defined, the method returns false. Otherwise, the condition is evaluated and true returned, if at least one condition returns true. To speed up the evaluation, the condition strings were already parsed in the method if_value().

Returns: True if at least one condition and return value exists and at least one condition expression was evaluated to true.

Definition at line 96 of file Module.cc.

◆ getAfterConditionPath()

Module::EAfterConditionPath getAfterConditionPath ( ) const

inherited

What to do after the conditional path is finished.

(defaults to c_End if no condition is set)

Definition at line 133 of file Module.cc.

◆ getConditionPath()

std::shared_ptr< Path > getConditionPath ( ) const

inherited

Returns the path of the last true condition (if there is at least one, else reaturn a null pointer).

Definition at line 113 of file Module.cc.

◆ getFileNames()

virtual std::vector<std::string> getFileNames ( bool outputFiles )

inlinevirtualinherited

Return a list of output filenames for this modules.

This will be called when basf2 is run with "--dry-run" if the module has set either the c_Input or c_Output properties.

If the parameter outputFiles is false (for modules with c_Input) the list of input filenames should be returned (if any). If outputFiles is true (for modules with c_Output) the list of output files should be returned (if any).

If a module has sat both properties this member is called twice, once for each property.

The module should return the actual list of requested input or produced output filenames (including handling of input/output overrides) so that the grid system can handle input/output files correctly.

This function should return the same value when called multiple times. This is especially important when taking the input/output overrides from Environment as they get consumed when obtained so the finalized list of output files should be stored for subsequent calls.

Reimplemented in RootOutputModule, StorageRootOutputModule, and RootInputModule.

Definition at line 134 of file Module.h.

◆ getName()

const std::string& getName ( ) const

inlineinherited

Returns the name of the module.

This can be changed via e.g. set_name() in the steering file to give more useful names if there is more than one module of the same type.

For identifying the type of a module, using getType() (or type() in Python) is recommended.

Definition at line 187 of file Module.h.

◆ getParamInfoListPython()

std::shared_ptr< boost::python::list > getParamInfoListPython ( ) const

inherited

Returns a python list of all parameters.

Each item in the list consists of the name of the parameter, a string describing its type, a python list of all default values and the description of the parameter.

Returns: A python list containing the parameters of this parameter list.

Definition at line 279 of file Module.cc.

◆ getReturnValue()

int getReturnValue ( ) const

inlineinherited

Return the return value set by this module.

This value is only meaningful if hasReturnValue() is true

Definition at line 381 of file Module.h.

◆ getType()

const std::string & getType ( ) const

inherited

Returns the type of the module (i.e.

class name minus 'Module')

Definition at line 41 of file Module.cc.

◆ hasProperties()

bool hasProperties ( unsigned int propertyFlags ) const

inherited

Returns true if all specified property flags are available in this module.

Parameters

propertyFlags Ored EModulePropFlags which should be compared with the module flags.

Definition at line 160 of file Module.cc.

◆ if_false()

void if_false	(	const std::shared_ptr< Path > &	path,
		EAfterConditionPath	afterConditionPath = `EAfterConditionPath::c_End`
	)

inherited

A simplified version to add a condition to the module.

Please note that successive calls of this function will add more than one condition to the module. If more than one condition results in true, only the last of them will be used.

Please be careful: Avoid creating cyclic paths, e.g. by linking a condition to a path which is processed before the path where this module is located in.

It is equivalent to the if_value() method, using the expression "<1". This method is meant to be used together with the setReturnValue(bool value) method.

Parameters

path	Shared pointer to the Path which will be executed if the return value is false.
afterConditionPath	What to do after executing 'path'.

Definition at line 85 of file Module.cc.

◆ if_true()

void if_true	(	const std::shared_ptr< Path > &	path,
		EAfterConditionPath	afterConditionPath = `EAfterConditionPath::c_End`
	)

inherited

A simplified version to set the condition of the module.

Please note that successive calls of this function will add more than one condition to the module. If more than one condition results in true, only the last of them will be used.

Please be careful: Avoid creating cyclic paths, e.g. by linking a condition to a path which is processed before the path where this module is located in.

It is equivalent to the if_value() method, using the expression ">=1". This method is meant to be used together with the setReturnValue(bool value) method.

Parameters

path	Shared pointer to the Path which will be executed if the return value is true.
afterConditionPath	What to do after executing 'path'.

Definition at line 90 of file Module.cc.

◆ if_value()

void if_value	(	const std::string &	expression,
		const std::shared_ptr< Path > &	path,
		EAfterConditionPath	afterConditionPath = `EAfterConditionPath::c_End`
	)

inherited

Add a condition to the module.

Please note that successive calls of this function will add more than one condition to the module. If more than one condition results in true, only the last of them will be used.

See https://confluence.desy.de/display/BI/Software+ModCondTut or ModuleCondition for a description of the syntax.

Please be careful: Avoid creating cyclic paths, e.g. by linking a condition to a path which is processed before the path where this module is located in.

Parameters

expression	The expression of the condition.
path	Shared pointer to the Path which will be executed if the condition is evaluated to true.
afterConditionPath	What to do after executing 'path'.

Definition at line 79 of file Module.cc.

◆ initialize()

void initialize ( void )

overridevirtual

Initialize the Module.

Initializes Geant4, calls the geometry converter, creates the physics processes and create the user actions.

Reimplemented from Module.

Definition at line 169 of file FullSimModule.cc.

◆ setDescription()

void setDescription ( const std::string & description )

protectedinherited

Sets the description of the module.

Parameters

description A description of the module.

Definition at line 214 of file Module.cc.

◆ setLogInfo()

void setLogInfo	(	int	logLevel,
		unsigned int	logInfo
	)

inherited

Configure the printed log information for the given level.

Parameters

logLevel	The log level (one of LogConfig::ELogLevel)
logInfo	What kind of info should be printed? ORed combination of LogConfig::ELogInfo flags.

Definition at line 73 of file Module.cc.

◆ setName()

void setName ( const std::string & name )

inlineinherited

Set the name of the module.

Note: The module name is set when using the REG_MODULE macro, but the module can be renamed before calling process() using the set_name() function in your steering file.

Parameters

name	The name of the module

Definition at line 214 of file Module.h.

◆ setParamPython()

void setParamPython	(	const std::string &	name,
		const boost::python::object &	pyObj
	)

privateinherited

Implements a method for setting boost::python objects.

The method supports the following types: list, dict, int, double, string, bool The conversion of the python object to the C++ type and the final storage of the parameter value is done in the ModuleParam class.

Parameters

name	The unique name of the parameter.
pyObj	The object which should be converted and stored as the parameter value.

Definition at line 234 of file Module.cc.

◆ setParamPythonDict()

void setParamPythonDict ( const boost::python::dict & dictionary )

privateinherited

Implements a method for reading the parameter values from a boost::python dictionary.

The key of the dictionary has to be the name of the parameter and the value has to be of one of the supported parameter types.

Parameters

dictionary The python dictionary from which the parameter values are read.

Definition at line 249 of file Module.cc.

◆ setPropertyFlags()

void setPropertyFlags ( unsigned int propertyFlags )

inherited

Sets the flags for the module properties.

Parameters

propertyFlags bitwise OR of EModulePropFlags

Definition at line 208 of file Module.cc.

◆ setReturnValue() [1/2]

void setReturnValue ( bool value )

protectedinherited

Sets the return value for this module as bool.

The bool value is saved as an integer with the convention 1 meaning true and 0 meaning false. The value can be used in the steering file to divide the analysis chain into several paths.

Parameters

value The value of the return value.

Definition at line 227 of file Module.cc.

◆ setReturnValue() [2/2]

void setReturnValue ( int value )

protectedinherited

Sets the return value for this module as integer.

The value can be used in the steering file to divide the analysis chain into several paths.

Parameters

value The value of the return value.

Definition at line 220 of file Module.cc.

◆ setType()

void setType ( const std::string & type )

protectedinherited

Set the module type.

Only for use by internal modules (which don't use the normal REG_MODULE mechanism).

Definition at line 48 of file Module.cc.

Member Data Documentation

◆ m_absorbers

std::vector<float> m_absorbers

protected

The absorbers defined at given radii where tracks across them will be destroyed.

This set is used in the PXD only simulation for PXD gain calibration.

Definition at line 132 of file FullSimModule.h.

◆ m_magneticCacheDistance

double m_magneticCacheDistance

protected

minimal distance for magnetic field lookup.

If distance is smaller, return last value

Definition at line 127 of file FullSimModule.h.

The documentation for this class was generated from the following files:

simulation/modules/fullsim/include/FullSimModule.h
simulation/modules/fullsim/src/FullSimModule.cc

Public Types

Public Member Functions

Static Public Member Functions

Protected Member Functions

Protected Attributes

Private Member Functions

Private Attributes

Detailed Description

Member Enumeration Documentation

◆ EModulePropFlags

Constructor & Destructor Documentation

◆ FullSimModule()

Member Function Documentation

◆ beginRun()

◆ clone()

◆ def_endRun()

◆ def_initialize()

◆ evalCondition()

◆ getAfterConditionPath()

◆ getConditionPath()

◆ getFileNames()

◆ getName()

◆ getParamInfoListPython()

◆ getReturnValue()

◆ getType()

◆ hasProperties()

◆ if_false()

◆ if_true()

◆ if_value()

◆ initialize()

◆ setDescription()

◆ setLogInfo()

◆ setName()

◆ setParamPython()

◆ setParamPythonDict()

◆ setPropertyFlags()

◆ setReturnValue() [1/2]

◆ setReturnValue() [2/2]

◆ setType()

Member Data Documentation

◆ m_absorbers

◆ m_magneticCacheDistance