The PXD Digitizer module. More...

#include <PXDDigitizerModule.h>

Inheritance diagram for PXDDigitizerModule:

Collaboration diagram for PXDDigitizerModule:

[legend]

Public Types
enum	EModulePropFlags { c_Input = 1 , c_Output = 2 , c_ParallelProcessingCertified = 4 , c_HistogramManager = 8 , c_InternalSerializer = 16 , c_TerminateInAllProcesses = 32 , c_DontCollectStatistics = 64 }
	Each module can be tagged with property flags, which indicate certain features of the module. More...

typedef ModuleCondition::EAfterConditionPath	EAfterConditionPath
	Forward the EAfterConditionPath definition from the ModuleCondition.

Public Member Functions
	PXDDigitizerModule ()
	Constructor. More...

void	processHit ()
	Process one PXDSimHit by dividing the step in smaller steps and drifting the charge.

void	driftCharge (const ROOT::Math::XYZVector &position, double electrons)
	Drift the charge inside the silicon. More...

void	addNoiseDigits ()
	Add pure noise digits to the Sensors.

double	addNoise (double charge)
	Calculate the noise contribution to one pixel with given charge. More...

void	saveDigits ()
	Save all digits to the datastore.

bool	checkIfGated (int gate)
	Check if gate was read while in gated mode.

void	initialize () override final
	Initialize the module and check the parameters.

void	beginRun () override final
	Initialize the list of existing PXD Sensors.

void	event () override final
	Digitize one event.

virtual std::vector< std::string >	getFileNames (bool outputFiles)
	Return a list of output filenames for this modules. More...

virtual void	endRun ()
	This method is called if the current run ends. More...

virtual void	terminate ()
	This method is called at the end of the event processing. More...

const std::string &	getName () const
	Returns the name of the module. More...

const std::string &	getType () const
	Returns the type of the module (i.e. More...

const std::string &	getPackage () const
	Returns the package this module is in.

const std::string &	getDescription () const
	Returns the description of the module.

void	setName (const std::string &name)
	Set the name of the module. More...

void	setPropertyFlags (unsigned int propertyFlags)
	Sets the flags for the module properties. More...

LogConfig &	getLogConfig ()
	Returns the log system configuration.

void	setLogConfig (const LogConfig &logConfig)
	Set the log system configuration.

void	setLogLevel (int logLevel)
	Configure the log level.

void	setDebugLevel (int debugLevel)
	Configure the debug messaging level.

void	setAbortLevel (int abortLevel)
	Configure the abort log level.

void	setLogInfo (int logLevel, unsigned int logInfo)
	Configure the printed log information for the given level. More...

void	if_value (const std::string &expression, const std::shared_ptr< Path > &path, EAfterConditionPath afterConditionPath=EAfterConditionPath::c_End)
	Add a condition to the module. More...

void	if_false (const std::shared_ptr< Path > &path, EAfterConditionPath afterConditionPath=EAfterConditionPath::c_End)
	A simplified version to add a condition to the module. More...

void	if_true (const std::shared_ptr< Path > &path, EAfterConditionPath afterConditionPath=EAfterConditionPath::c_End)
	A simplified version to set the condition of the module. More...

bool	hasCondition () const
	Returns true if at least one condition was set for the module.

const ModuleCondition *	getCondition () const
	Return a pointer to the first condition (or nullptr, if none was set)

const std::vector< ModuleCondition > &	getAllConditions () const
	Return all set conditions for this module.

bool	evalCondition () const
	If at least one condition was set, it is evaluated and true returned if at least one condition returns true. More...

std::shared_ptr< Path >	getConditionPath () const
	Returns the path of the last true condition (if there is at least one, else reaturn a null pointer). More...

Module::EAfterConditionPath	getAfterConditionPath () const
	What to do after the conditional path is finished. More...

std::vector< std::shared_ptr< Path > >	getAllConditionPaths () const
	Return all condition paths currently set (no matter if the condition is true or not).

bool	hasProperties (unsigned int propertyFlags) const
	Returns true if all specified property flags are available in this module. More...

bool	hasUnsetForcedParams () const
	Returns true and prints error message if the module has unset parameters which the user has to set in the steering file.

const ModuleParamList &	getParamList () const
	Return module param list.

template<typename T >
ModuleParam< T > &	getParam (const std::string &name) const
	Returns a reference to a parameter. More...

bool	hasReturnValue () const
	Return true if this module has a valid return value set.

int	getReturnValue () const
	Return the return value set by this module. More...

std::shared_ptr< PathElement >	clone () const override
	Create an independent copy of this module. More...

std::shared_ptr< boost::python::list >	getParamInfoListPython () const
	Returns a python list of all parameters. More...

Static Public Member Functions
static void	exposePythonAPI ()
	Exposes methods of the Module class to Python.

Protected Member Functions
virtual void	def_initialize ()
	Wrappers to make the methods without "def_" prefix callable from Python. More...

virtual void	def_beginRun ()
	Wrapper method for the virtual function beginRun() that has the implementation to be used in a call from Python.

virtual void	def_event ()
	Wrapper method for the virtual function event() that has the implementation to be used in a call from Python.

virtual void	def_endRun ()
	This method can receive that the current run ends as a call from the Python side. More...

virtual void	def_terminate ()
	Wrapper method for the virtual function terminate() that has the implementation to be used in a call from Python.

void	setDescription (const std::string &description)
	Sets the description of the module. More...

void	setType (const std::string &type)
	Set the module type. More...

template<typename T >
void	addParam (const std::string &name, T &paramVariable, const std::string &description, const T &defaultValue)
	Adds a new parameter to the module. More...

template<typename T >
void	addParam (const std::string &name, T &paramVariable, const std::string &description)
	Adds a new enforced parameter to the module. More...

void	setReturnValue (int value)
	Sets the return value for this module as integer. More...

void	setReturnValue (bool value)
	Sets the return value for this module as bool. More...

void	setParamList (const ModuleParamList &params)
	Replace existing parameter list.

Protected Attributes
bool	m_applyNoise
	Wether or not to apply noise.

double	m_elNoise
	Amount of noise to apply.

double	m_noiseFraction
	Fraction of noisy pixels per sensor.

std::string	m_storeMCParticlesName
	Name of the collection for the MCParticles.

std::string	m_storeDigitsName
	Name of the collection for the PXDDigits.

std::string	m_storeSimHitsName
	Name of the collection for the PXDSimhits.

std::string	m_storeTrueHitsName
	Name of the collection for the PXDTrueHits.

std::string	m_relMCParticleSimHitName
	Name of the relation between MCParticles and PXDSimHits.

std::string	m_relDigitMCParticleName
	Name of the relation between PXDDigits and MCParticles.

std::string	m_relTrueHitSimHitName
	Name of the relation between PXDTrueHits and PXDSimHits.

std::string	m_relDigitTrueHitName
	Name of the relation between PXDDigits and PXDTrueHits.

bool	m_applyPoisson
	Wether or not to apply poission fluctuation of charge.

bool	m_applyWindow
	Wether or not to apply a time window cut.

bool	m_gatingWithoutReadout
	Digits from gated rows not sent to DHH.

double	m_gatingWithoutReadoutTime
	Time window during which digits from gated rows are not sent to DHH.

double	m_gatingTime
	Time window during which the PXD is not collecting charge.

double	m_hwdelay
	Hardware delay between time of bunch crossing and switching on triggergate in ns.

double	m_segmentLength
	Max. More...

int	m_elGroupSize
	Max number of electrons per random walk.

double	m_elStepTime
	Timeframe for one random walk step.

int	m_elMaxSteps
	Maximum number of random walks before abort.

double	m_eToADU
	ENC equivalent of 1 ADU.

double	m_gq
	g_q of a pixel in nA/electrons.

double	m_ADCUnit
	Slope of the linear ADC transfer curve in nA/ADU.

double	m_chargeThreshold
	Zero-suppression threshold in ADU.

double	m_chargeThresholdElectrons
	... More...

double	m_pedestalMean
	Mean pedestal in ADU.

double	m_pedestalRMS
	RMS pedestal in ADU.

Sensors	m_sensors
	Structure containing all existing sensors.

const PXDSimHit *	m_currentHit
	Pointer to the PXDSimhit currently digitized.

int	m_currentParticle
	Index of the particle which caused the current hit.

int	m_currentTrueHit
	Index of the TrueHit the current hit belongs to.

Sensor *	m_currentSensor
	Pointer to the sensor in which the current hit occured.

const SensorInfo *	m_currentSensorInfo
	Pointer to the SensorInfo of the current sensor.

ROOT::Math::XYZVector	m_currentBField
	Current magnetic field.

int	m_nGates
	Number of readout gates (or total number of Switcher channels)

double	m_pxdIntegrationTime
	Integration time for each gate of the PXD in ns.

double	m_timePerGate
	Time needed to sample and clear a readout gate

int	m_triggerGate
	PXD triggergate.

bool	m_gated
	Gated mode flag.

std::vector< float >	m_gatingStartTimes
	Vector of start times for gating.

std::vector< std::pair< int, int > >	m_gatedChannelIntervals
	Vector of gated readout channels

Private Member Functions
std::list< ModulePtr >	getModules () const override
	no submodules, return empty list

std::string	getPathString () const override
	return the module name.

void	setParamPython (const std::string &name, const boost::python::object &pyObj)
	Implements a method for setting boost::python objects. More...

void	setParamPythonDict (const boost::python::dict &dictionary)
	Implements a method for reading the parameter values from a boost::python dictionary. More...

Private Attributes
StoreObjPtr< PXDInjectionBGTiming >	m_storePXDTiming
	Input array for timings.

std::string	m_name
	The name of the module, saved as a string (user-modifiable)

std::string	m_type
	The type of the module, saved as a string.

std::string	m_package
	Package this module is found in (may be empty).

std::string	m_description
	The description of the module.

unsigned int	m_propertyFlags
	The properties of the module as bitwise or (with \|) of EModulePropFlags.

LogConfig	m_logConfig
	The log system configuration of the module.

ModuleParamList	m_moduleParamList
	List storing and managing all parameter of the module.

bool	m_hasReturnValue
	True, if the return value is set.

int	m_returnValue
	The return value.

std::vector< ModuleCondition >	m_conditions
	Module condition, only non-null if set.

Detailed Description

The PXD Digitizer module.

This module is responsible for converting the simulated energy deposition from Geant4 into real PXD detector response of single pixles.

Definition at line 94 of file PXDDigitizerModule.h.

Member Enumeration Documentation

◆ EModulePropFlags

enum EModulePropFlags

inherited

Each module can be tagged with property flags, which indicate certain features of the module.

Enumerator
c_Input	This module is an input module (reads data).
c_Output	This module is an output module (writes data).
c_ParallelProcessingCertified	This module can be run in parallel processing mode safely (All I/O must be done through the data store, in particular, the module must not write any files.)
c_HistogramManager	This module is used to manage histograms accumulated by other modules.
c_InternalSerializer	This module is an internal serializer/deserializer for parallel processing.
c_TerminateInAllProcesses	When using parallel processing, call this module's terminate() function in all processes(). This will also ensure that there is exactly one process (single-core if no parallel modules found) or at least one input, one main and one output process.
c_DontCollectStatistics	No statistics is collected for this module.

Definition at line 77 of file Module.h.

Constructor & Destructor Documentation

◆ PXDDigitizerModule()

PXDDigitizerModule ( )

Constructor.

Definition at line 43 of file PXDDigitizerModule.cc.

                                        : Module()
   , m_noiseFraction(0), m_eToADU(0), m_chargeThreshold(0), m_chargeThresholdElectrons(0)
   , m_currentHit(nullptr), m_currentParticle(0), m_currentTrueHit(0), m_currentSensor(nullptr)
   , m_currentSensorInfo(nullptr), m_nGates(0), m_pxdIntegrationTime(0), m_timePerGate(0)
   , m_triggerGate(0), m_gated(false)
 {
   //Set module properties
   setDescription("Digitize PXDSimHits");
   setPropertyFlags(c_ParallelProcessingCertified);
   addParam("ElectronicEffects", m_applyNoise, "Apply electronic effects?",
            true);
   addParam("ElectronicNoise", m_elNoise,
            "Noise added by the electronics, set in ENC", 150.0);
  
   addParam("MCParticles", m_storeMCParticlesName,
            "MCParticle collection name", string(""));
   addParam("Digits", m_storeDigitsName, "Digits collection name", string(""));
   addParam("SimHits", m_storeSimHitsName, "SimHit collection name",
            string(""));
   addParam("TrueHits", m_storeTrueHitsName, "TrueHit collection name",
            string(""));
  
   addParam("PoissonSmearing", m_applyPoisson,
            "Apply Poisson smearing of electrons collected on pixels?", true);
   addParam("IntegrationWindow", m_applyWindow, "Use integration window?",
            true);
  
   addParam("SegmentLength", m_segmentLength, "Maximum segment length (in mm)",
            0.005);
   addParam("ElectronGroupSize", m_elGroupSize,
            "Split Signalpoints in smaller groups of N electrons (in e)", 100);
   addParam("ElectronStepTime", m_elStepTime,
            "Time step for tracking electron groups in readout plane (in ns)",
            1.0);
   addParam("ElectronMaxSteps", m_elMaxSteps,
            "Maximum number of steps when propagating electrons", 200);
   addParam("Gq", m_gq, "Gq of a pixel in nA/electron", 0.6);
   addParam("ADCUnit", m_ADCUnit, "Slope of the linear ADC transfer curve in nA/ADU", 130.0);
   addParam("PedestalMean", m_pedestalMean, "Mean of pedestals in ADU", 100.0);
   addParam("PedestalRMS", m_pedestalRMS, "RMS of pedestals in ADU", 30.0);
   addParam("GatingTime", m_gatingTime,
            "Time window during which the PXD is not collecting charge in nano seconds", 400.0);
   addParam("GatingWithoutReadout", m_gatingWithoutReadout,
            "Digits from gated rows not sent to DHH ", true);
   addParam("GatingWithoutReadoutTime", m_gatingWithoutReadoutTime,
            "Time window during which digits from gated rows are not sent to DHH in nano seconds", 1400.0);
   addParam("HardwareDelay", m_hwdelay,
            "Constant time delay between bunch crossing and switching on triggergate in nano seconds", 0.0);
  
 }

Member Function Documentation

◆ addNoise()

double addNoise ( double charge )

Calculate the noise contribution to one pixel with given charge.

Returns: the new charge of the pixel.

Definition at line 473 of file PXDDigitizerModule.cc.

◆ clone()

std::shared_ptr< PathElement > clone ( ) const

overridevirtualinherited

Create an independent copy of this module.

Note that parameters are shared, so changing them on a cloned module will also affect the original module.

Implements PathElement.

Definition at line 179 of file Module.cc.

◆ def_endRun()

virtual void def_endRun ( )

inlineprotectedvirtualinherited

This method can receive that the current run ends as a call from the Python side.

For regular C++-Modules that forwards the call to the regular endRun() method.

Reimplemented in PyModule.

Definition at line 439 of file Module.h.

◆ def_initialize()

virtual void def_initialize ( )

inlineprotectedvirtualinherited

Wrappers to make the methods without "def_" prefix callable from Python.

Overridden in PyModule. Wrapper method for the virtual function initialize() that has the implementation to be used in a call from Python.

Reimplemented in PyModule.

Definition at line 420 of file Module.h.

◆ driftCharge()

void driftCharge	(	const ROOT::Math::XYZVector &	position,
		double	electrons
	)

Drift the charge inside the silicon.

This method will drift the charge inside the silicon in two steps:

Drift to the potential minimum plane by using vertical drift along the fieldlines
Random walk inside the potential minimum until approaching an internal gate close enough to be caught.
Parameters

position start position of the charge

electrons number of electrons to drift

Definition at line 424 of file PXDDigitizerModule.cc.

◆ endRun()

virtual void endRun ( void )

inlinevirtualinherited

This method is called if the current run ends.

Use this method to store information, which should be aggregated over one run.

This method can be implemented by subclasses.

Definition at line 166 of file Module.h.

◆ evalCondition()

bool evalCondition ( ) const

inherited

If at least one condition was set, it is evaluated and true returned if at least one condition returns true.

If no condition or result value was defined, the method returns false. Otherwise, the condition is evaluated and true returned, if at least one condition returns true. To speed up the evaluation, the condition strings were already parsed in the method if_value().

Returns: True if at least one condition and return value exists and at least one condition expression was evaluated to true.

Definition at line 96 of file Module.cc.

◆ getAfterConditionPath()

Module::EAfterConditionPath getAfterConditionPath ( ) const

inherited

What to do after the conditional path is finished.

(defaults to c_End if no condition is set)

Definition at line 133 of file Module.cc.

◆ getConditionPath()

std::shared_ptr< Path > getConditionPath ( ) const

inherited

Returns the path of the last true condition (if there is at least one, else reaturn a null pointer).

Definition at line 113 of file Module.cc.

◆ getFileNames()

virtual std::vector<std::string> getFileNames ( bool outputFiles )

inlinevirtualinherited

Return a list of output filenames for this modules.

This will be called when basf2 is run with "--dry-run" if the module has set either the c_Input or c_Output properties.

If the parameter outputFiles is false (for modules with c_Input) the list of input filenames should be returned (if any). If outputFiles is true (for modules with c_Output) the list of output files should be returned (if any).

If a module has sat both properties this member is called twice, once for each property.

The module should return the actual list of requested input or produced output filenames (including handling of input/output overrides) so that the grid system can handle input/output files correctly.

This function should return the same value when called multiple times. This is especially important when taking the input/output overrides from Environment as they get consumed when obtained so the finalized list of output files should be stored for subsequent calls.

Reimplemented in RootOutputModule, StorageRootOutputModule, and RootInputModule.

Definition at line 134 of file Module.h.

◆ getName()

const std::string& getName ( ) const

inlineinherited

Returns the name of the module.

This can be changed via e.g. set_name() in the steering file to give more useful names if there is more than one module of the same type.

For identifying the type of a module, using getType() (or type() in Python) is recommended.

Definition at line 187 of file Module.h.

◆ getParamInfoListPython()

std::shared_ptr< boost::python::list > getParamInfoListPython ( ) const

inherited

Returns a python list of all parameters.

Each item in the list consists of the name of the parameter, a string describing its type, a python list of all default values and the description of the parameter.

Returns: A python list containing the parameters of this parameter list.

Definition at line 279 of file Module.cc.

◆ getReturnValue()

int getReturnValue ( ) const

inlineinherited

Return the return value set by this module.

This value is only meaningful if hasReturnValue() is true

Definition at line 381 of file Module.h.

◆ getType()

const std::string & getType ( ) const

inherited

Returns the type of the module (i.e.

class name minus 'Module')

Definition at line 41 of file Module.cc.

◆ hasProperties()

bool hasProperties ( unsigned int propertyFlags ) const

inherited

Returns true if all specified property flags are available in this module.

Parameters

propertyFlags Ored EModulePropFlags which should be compared with the module flags.

Definition at line 160 of file Module.cc.

◆ if_false()

void if_false	(	const std::shared_ptr< Path > &	path,
		EAfterConditionPath	afterConditionPath = `EAfterConditionPath::c_End`
	)

inherited

A simplified version to add a condition to the module.

Please note that successive calls of this function will add more than one condition to the module. If more than one condition results in true, only the last of them will be used.

Please be careful: Avoid creating cyclic paths, e.g. by linking a condition to a path which is processed before the path where this module is located in.

It is equivalent to the if_value() method, using the expression "<1". This method is meant to be used together with the setReturnValue(bool value) method.

Parameters

path	Shared pointer to the Path which will be executed if the return value is false.
afterConditionPath	What to do after executing 'path'.

Definition at line 85 of file Module.cc.

◆ if_true()

void if_true	(	const std::shared_ptr< Path > &	path,
		EAfterConditionPath	afterConditionPath = `EAfterConditionPath::c_End`
	)

inherited

A simplified version to set the condition of the module.

Please note that successive calls of this function will add more than one condition to the module. If more than one condition results in true, only the last of them will be used.

Please be careful: Avoid creating cyclic paths, e.g. by linking a condition to a path which is processed before the path where this module is located in.

It is equivalent to the if_value() method, using the expression ">=1". This method is meant to be used together with the setReturnValue(bool value) method.

Parameters

path	Shared pointer to the Path which will be executed if the return value is true.
afterConditionPath	What to do after executing 'path'.

Definition at line 90 of file Module.cc.

◆ if_value()

void if_value	(	const std::string &	expression,
		const std::shared_ptr< Path > &	path,
		EAfterConditionPath	afterConditionPath = `EAfterConditionPath::c_End`
	)

inherited

Add a condition to the module.

Please note that successive calls of this function will add more than one condition to the module. If more than one condition results in true, only the last of them will be used.

See https://confluence.desy.de/display/BI/Software+ModCondTut or ModuleCondition for a description of the syntax.

Please be careful: Avoid creating cyclic paths, e.g. by linking a condition to a path which is processed before the path where this module is located in.

Parameters

expression	The expression of the condition.
path	Shared pointer to the Path which will be executed if the condition is evaluated to true.
afterConditionPath	What to do after executing 'path'.

Definition at line 79 of file Module.cc.

◆ setDescription()

void setDescription ( const std::string & description )

protectedinherited

Sets the description of the module.

Parameters

description A description of the module.

Definition at line 214 of file Module.cc.

◆ setLogInfo()

void setLogInfo	(	int	logLevel,
		unsigned int	logInfo
	)

inherited

Configure the printed log information for the given level.

Parameters

logLevel	The log level (one of LogConfig::ELogLevel)
logInfo	What kind of info should be printed? ORed combination of LogConfig::ELogInfo flags.

Definition at line 73 of file Module.cc.

◆ setName()

void setName ( const std::string & name )

inlineinherited

Set the name of the module.

Note: The module name is set when using the REG_MODULE macro, but the module can be renamed before calling process() using the set_name() function in your steering file.

Parameters

name	The name of the module

Definition at line 214 of file Module.h.

◆ setParamPython()

void setParamPython	(	const std::string &	name,
		const boost::python::object &	pyObj
	)

privateinherited

Implements a method for setting boost::python objects.

The method supports the following types: list, dict, int, double, string, bool The conversion of the python object to the C++ type and the final storage of the parameter value is done in the ModuleParam class.

Parameters

name	The unique name of the parameter.
pyObj	The object which should be converted and stored as the parameter value.

Definition at line 234 of file Module.cc.

◆ setParamPythonDict()

void setParamPythonDict ( const boost::python::dict & dictionary )

privateinherited

Implements a method for reading the parameter values from a boost::python dictionary.

The key of the dictionary has to be the name of the parameter and the value has to be of one of the supported parameter types.

Parameters

dictionary The python dictionary from which the parameter values are read.

Definition at line 249 of file Module.cc.

◆ setPropertyFlags()

void setPropertyFlags ( unsigned int propertyFlags )

inherited

Sets the flags for the module properties.

Parameters

propertyFlags bitwise OR of EModulePropFlags

Definition at line 208 of file Module.cc.

◆ setReturnValue() [1/2]

void setReturnValue ( bool value )

protectedinherited

Sets the return value for this module as bool.

The bool value is saved as an integer with the convention 1 meaning true and 0 meaning false. The value can be used in the steering file to divide the analysis chain into several paths.

Parameters

value The value of the return value.

Definition at line 227 of file Module.cc.

◆ setReturnValue() [2/2]

void setReturnValue ( int value )

protectedinherited

Sets the return value for this module as integer.

The value can be used in the steering file to divide the analysis chain into several paths.

Parameters

value The value of the return value.

Definition at line 220 of file Module.cc.

◆ setType()

void setType ( const std::string & type )

protectedinherited

Set the module type.

Only for use by internal modules (which don't use the normal REG_MODULE mechanism).

Definition at line 48 of file Module.cc.

◆ terminate()

virtual void terminate ( void )

inlinevirtualinherited

This method is called at the end of the event processing.

This method is called only once after the event processing finished. Use this method for cleaning up, closing files, etc.

This method can be implemented by subclasses.

Definition at line 176 of file Module.h.

Member Data Documentation

◆ m_chargeThresholdElectrons

double m_chargeThresholdElectrons

protected

...

and its equivalent in electrons

Definition at line 186 of file PXDDigitizerModule.h.

◆ m_segmentLength

double m_segmentLength

protected

Max.

Segment length to use for charge drifting

Definition at line 170 of file PXDDigitizerModule.h.

The documentation for this class was generated from the following files:

pxd/modules/pxdSimulation/include/PXDDigitizerModule.h
pxd/modules/pxdSimulation/src/PXDDigitizerModule.cc

position	start position of the charge
electrons	number of electrons to drift

Public Types

Public Member Functions

Static Public Member Functions

Protected Member Functions

Protected Attributes

Private Member Functions

Private Attributes

Detailed Description

Member Enumeration Documentation

◆ EModulePropFlags

Constructor & Destructor Documentation

◆ PXDDigitizerModule()

Member Function Documentation

◆ addNoise()

◆ clone()

◆ def_endRun()

◆ def_initialize()

◆ driftCharge()

◆ endRun()

◆ evalCondition()

◆ getAfterConditionPath()

◆ getConditionPath()

◆ getFileNames()

◆ getName()

◆ getParamInfoListPython()

◆ getReturnValue()

◆ getType()

◆ hasProperties()

◆ if_false()

◆ if_true()

◆ if_value()

◆ setDescription()

◆ setLogInfo()

◆ setName()

◆ setParamPython()

◆ setParamPythonDict()

◆ setPropertyFlags()

◆ setReturnValue() [1/2]

◆ setReturnValue() [2/2]

◆ setType()

◆ terminate()

Member Data Documentation

◆ m_chargeThresholdElectrons

◆ m_segmentLength