This module may be used to apply the corrections to dE/dx per the calibration constants. More...

#include <CDCDedxCorrectionModule.h>

Inheritance diagram for CDCDedxCorrectionModule:

Collaboration diagram for CDCDedxCorrectionModule:

[legend]

Public Types
enum	EModulePropFlags { c_Input = 1 , c_Output = 2 , c_ParallelProcessingCertified = 4 , c_HistogramManager = 8 , c_InternalSerializer = 16 , c_TerminateInAllProcesses = 32 , c_DontCollectStatistics = 64 }
	Each module can be tagged with property flags, which indicate certain features of the module. More...

typedef ModuleCondition::EAfterConditionPath	EAfterConditionPath
	Forward the EAfterConditionPath definition from the ModuleCondition.

Public Member Functions
	CDCDedxCorrectionModule ()
	Constructor.

virtual	~CDCDedxCorrectionModule ()
	Destructor.

virtual void	initialize () override
	Initialize the Module. More...

virtual void	event () override
	This method is called for each event. More...

virtual void	terminate () override
	End of the event processing.

void	RunGainCorrection (double &dedx) const
	Perform a run gain correction.

void	TimeGainCorrection (double &dedx, double ring, double time) const
	Perform a injection time gain correction.

void	WireGainCorrection (int wireID, double &dedx, int layer) const
	Perform a wire gain correction.

void	TwoDCorrection (int layer, double doca, double enta, double &dedx) const
	Perform a 2D correction.

void	OneDCorrection (int layer, double enta, double &dedx) const
	Perform a wire gain correction.

void	CosineCorrection (double costheta, double &dedx) const
	Perform the cosine correction.

void	CosineEdgeCorrection (double costh, double &dedx) const
	Perform the cosine edge correction.

void	HadronCorrection (double costheta, double &dedx) const
	Perform a hadron saturation correction. More...

void	StandardCorrection (int adc, int layer, int wireID, double doca, double enta, double length, double costheta, double ring, double time, double &dedx) const
	Perform a standard set of corrections.

double	GetCorrection (int &adc, int layer, int wireID, double doca, double enta, double costheta, double ring, double time) const
	Get the standard set of corrections.

double	D2I (const double cosTheta, const double D) const
	Saturation correction: convert the measured ionization (D) to actual ionization (I)

double	I2D (const double cosTheta, const double I) const
	Saturation correction: convert the actural ionization (I) to measured ionization (D)

virtual std::vector< std::string >	getFileNames (bool outputFiles)
	Return a list of output filenames for this modules. More...

virtual void	beginRun ()
	Called when entering a new run. More...

virtual void	endRun ()
	This method is called if the current run ends. More...

const std::string &	getName () const
	Returns the name of the module. More...

const std::string &	getType () const
	Returns the type of the module (i.e. More...

const std::string &	getPackage () const
	Returns the package this module is in.

const std::string &	getDescription () const
	Returns the description of the module.

void	setName (const std::string &name)
	Set the name of the module. More...

void	setPropertyFlags (unsigned int propertyFlags)
	Sets the flags for the module properties. More...

LogConfig &	getLogConfig ()
	Returns the log system configuration.

void	setLogConfig (const LogConfig &logConfig)
	Set the log system configuration.

void	setLogLevel (int logLevel)
	Configure the log level.

void	setDebugLevel (int debugLevel)
	Configure the debug messaging level.

void	setAbortLevel (int abortLevel)
	Configure the abort log level.

void	setLogInfo (int logLevel, unsigned int logInfo)
	Configure the printed log information for the given level. More...

void	if_value (const std::string &expression, const std::shared_ptr< Path > &path, EAfterConditionPath afterConditionPath=EAfterConditionPath::c_End)
	Add a condition to the module. More...

void	if_false (const std::shared_ptr< Path > &path, EAfterConditionPath afterConditionPath=EAfterConditionPath::c_End)
	A simplified version to add a condition to the module. More...

void	if_true (const std::shared_ptr< Path > &path, EAfterConditionPath afterConditionPath=EAfterConditionPath::c_End)
	A simplified version to set the condition of the module. More...

bool	hasCondition () const
	Returns true if at least one condition was set for the module.

const ModuleCondition *	getCondition () const
	Return a pointer to the first condition (or nullptr, if none was set)

const std::vector< ModuleCondition > &	getAllConditions () const
	Return all set conditions for this module.

bool	evalCondition () const
	If at least one condition was set, it is evaluated and true returned if at least one condition returns true. More...

std::shared_ptr< Path >	getConditionPath () const
	Returns the path of the last true condition (if there is at least one, else reaturn a null pointer). More...

Module::EAfterConditionPath	getAfterConditionPath () const
	What to do after the conditional path is finished. More...

std::vector< std::shared_ptr< Path > >	getAllConditionPaths () const
	Return all condition paths currently set (no matter if the condition is true or not).

bool	hasProperties (unsigned int propertyFlags) const
	Returns true if all specified property flags are available in this module. More...

bool	hasUnsetForcedParams () const
	Returns true and prints error message if the module has unset parameters which the user has to set in the steering file.

const ModuleParamList &	getParamList () const
	Return module param list.

template<typename T >
ModuleParam< T > &	getParam (const std::string &name) const
	Returns a reference to a parameter. More...

bool	hasReturnValue () const
	Return true if this module has a valid return value set.

int	getReturnValue () const
	Return the return value set by this module. More...

std::shared_ptr< PathElement >	clone () const override
	Create an independent copy of this module. More...

std::shared_ptr< boost::python::list >	getParamInfoListPython () const
	Returns a python list of all parameters. More...

Static Public Member Functions
static void	exposePythonAPI ()
	Exposes methods of the Module class to Python.

Protected Member Functions
virtual void	def_initialize ()
	Wrappers to make the methods without "def_" prefix callable from Python. More...

virtual void	def_beginRun ()
	Wrapper method for the virtual function beginRun() that has the implementation to be used in a call from Python.

virtual void	def_event ()
	Wrapper method for the virtual function event() that has the implementation to be used in a call from Python.

virtual void	def_endRun ()
	This method can receive that the current run ends as a call from the Python side. More...

virtual void	def_terminate ()
	Wrapper method for the virtual function terminate() that has the implementation to be used in a call from Python.

void	setDescription (const std::string &description)
	Sets the description of the module. More...

void	setType (const std::string &type)
	Set the module type. More...

template<typename T >
void	addParam (const std::string &name, T &paramVariable, const std::string &description, const T &defaultValue)
	Adds a new parameter to the module. More...

template<typename T >
void	addParam (const std::string &name, T &paramVariable, const std::string &description)
	Adds a new enforced parameter to the module. More...

void	setReturnValue (int value)
	Sets the return value for this module as integer. More...

void	setReturnValue (bool value)
	Sets the return value for this module as bool. More...

void	setParamList (const ModuleParamList &params)
	Replace existing parameter list.

Private Member Functions
void	calculateMeans (double mean, double truncatedMean, double *truncatedMeanErr, const std::vector< double > &dedx) const
	Recalculate the dE/dx mean values after corrections.

std::list< ModulePtr >	getModules () const override
	no submodules, return empty list

std::string	getPathString () const override
	return the module name.

void	setParamPython (const std::string &name, const boost::python::object &pyObj)
	Implements a method for setting boost::python objects. More...

void	setParamPythonDict (const boost::python::dict &dictionary)
	Implements a method for reading the parameter values from a boost::python dictionary. More...

Private Attributes
bool	m_relative
	boolean to apply relative or absolute correction

bool	m_momCor
	boolean to apply momentum correction

bool	m_useDBMomCor
	boolean to apply momentum correction from DB

bool	m_scaleCor
	boolean to apply scale factor

bool	m_cosineCor
	boolean to apply cosine correction

bool	m_wireGain
	boolean to apply wire gains

bool	m_runGain
	boolean to apply run gains

bool	m_timeGain
	boolean to apply injection time gains

bool	m_twoDCell
	boolean to apply 2D correction

bool	m_oneDCell
	boolean to apply 1D correction

bool	m_cosineEdge
	boolean to apply cosine edge

bool	m_nonlADC
	boolean to apply non linear ADC

StoreArray< CDCDedxTrack >	m_cdcDedxTracks
	Store array: CDCDedxTrack.

StoreObjPtr< EventLevelTriggerTimeInfo >	m_TTDInfo
	Store Object Ptr: EventLevelTriggerTimeInfo.

DBObjPtr< CDCDedxScaleFactor >	m_DBScaleFactor
	Scale factor to make electrons ~1.

DBObjPtr< CDCDedxMomentumCor >	m_DBMomentumCor
	Momentum correction DB object.

DBObjPtr< CDCDedxWireGain >	m_DBWireGains
	Wire gain DB object.

DBObjPtr< CDCDedxRunGain >	m_DBRunGain
	Run gain DB object.

DBObjPtr< CDCDedxInjectionTime >	m_DBInjectTime
	time gain/reso DB object

DBObjPtr< CDCDedxCosineCor >	m_DBCosineCor
	Electron saturation correction DB object.

DBObjPtr< CDCDedx2DCell >	m_DB2DCell
	2D correction DB object

DBObjPtr< CDCDedx1DCell >	m_DB1DCell
	1D correction DB object

DBObjPtr< CDCDedxHadronCor >	m_DBHadronCor
	hadron saturation parameters

DBObjPtr< CDCDedxADCNonLinearity >	m_DBNonlADC
	hadron saturation non linearity

DBObjPtr< CDCDedxCosineEdge >	m_DBCosEdgeCor
	cosine edge calibration

std::vector< double >	m_hadronpars
	hadron saturation parameters

std::array< double, 56 >	m_lgainavg
	average calibration factor for the layer

double	m_removeLowest
	lower bound for truncated mean

double	m_removeHighest
	upper bound for truncated mean

std::string	m_name
	The name of the module, saved as a string (user-modifiable)

std::string	m_type
	The type of the module, saved as a string.

std::string	m_package
	Package this module is found in (may be empty).

std::string	m_description
	The description of the module.

unsigned int	m_propertyFlags
	The properties of the module as bitwise or (with \|) of EModulePropFlags.

LogConfig	m_logConfig
	The log system configuration of the module.

ModuleParamList	m_moduleParamList
	List storing and managing all parameter of the module.

bool	m_hasReturnValue
	True, if the return value is set.

int	m_returnValue
	The return value.

std::vector< ModuleCondition >	m_conditions
	Module condition, only non-null if set.

Detailed Description

This module may be used to apply the corrections to dE/dx per the calibration constants.

The interface with the calibration database is currently under construction and will be included when ready. For now, placeholders are used so the structure may be developed.

Definition at line 52 of file CDCDedxCorrectionModule.h.

Member Enumeration Documentation

◆ EModulePropFlags

enum EModulePropFlags

inherited

Each module can be tagged with property flags, which indicate certain features of the module.

Enumerator
c_Input	This module is an input module (reads data).
c_Output	This module is an output module (writes data).
c_ParallelProcessingCertified	This module can be run in parallel processing mode safely (All I/O must be done through the data store, in particular, the module must not write any files.)
c_HistogramManager	This module is used to manage histograms accumulated by other modules.
c_InternalSerializer	This module is an internal serializer/deserializer for parallel processing.
c_TerminateInAllProcesses	When using parallel processing, call this module's terminate() function in all processes(). This will also ensure that there is exactly one process (single-core if no parallel modules found) or at least one input, one main and one output process.
c_DontCollectStatistics	No statistics is collected for this module.

Definition at line 77 of file Module.h.

Member Function Documentation

◆ beginRun()

virtual void beginRun ( void )

inlinevirtualinherited

Called when entering a new run.

Called at the beginning of each run, the method gives you the chance to change run dependent constants like alignment parameters, etc.

This method can be implemented by subclasses.

Definition at line 147 of file Module.h.

◆ clone()

std::shared_ptr< PathElement > clone ( ) const

overridevirtualinherited

Create an independent copy of this module.

Note that parameters are shared, so changing them on a cloned module will also affect the original module.

Implements PathElement.

Definition at line 179 of file Module.cc.

◆ def_endRun()

virtual void def_endRun ( )

inlineprotectedvirtualinherited

This method can receive that the current run ends as a call from the Python side.

For regular C++-Modules that forwards the call to the regular endRun() method.

Reimplemented in PyModule.

Definition at line 439 of file Module.h.

◆ def_initialize()

virtual void def_initialize ( )

inlineprotectedvirtualinherited

Wrappers to make the methods without "def_" prefix callable from Python.

Overridden in PyModule. Wrapper method for the virtual function initialize() that has the implementation to be used in a call from Python.

Reimplemented in PyModule.

Definition at line 420 of file Module.h.

◆ endRun()

virtual void endRun ( void )

inlinevirtualinherited

This method is called if the current run ends.

Use this method to store information, which should be aggregated over one run.

This method can be implemented by subclasses.

Definition at line 166 of file Module.h.

◆ evalCondition()

bool evalCondition ( ) const

inherited

If at least one condition was set, it is evaluated and true returned if at least one condition returns true.

If no condition or result value was defined, the method returns false. Otherwise, the condition is evaluated and true returned, if at least one condition returns true. To speed up the evaluation, the condition strings were already parsed in the method if_value().

Returns: True if at least one condition and return value exists and at least one condition expression was evaluated to true.

Definition at line 96 of file Module.cc.

◆ event()

void event ( void )

overridevirtual

This method is called for each event.

All processing of the event has to take place in this method.

Reimplemented from Module.

Definition at line 94 of file CDCDedxCorrectionModule.cc.

 {
  
   // **************************************************
   //  LOOP OVER EACH DEDX MEASUREMENT (TRACK LEVEL)
   // **************************************************
   for (auto& dedxTrack : m_cdcDedxTracks) {
     if (dedxTrack.size() == 0) {
       B2WARNING("No good hits on this track...");
       continue;
     }
  
     // **************************************************
     //  LOOP OVER EACH DEDX MEASUREMENT (HIT LEVEL)
     // **************************************************
     // hit level
     int nhits = dedxTrack.size();
     double costh = dedxTrack.getCosTheta();
     std::vector<double> newLayerHits;
     double newLayerDe = 0, newLayerDx = 0;
  
     if (costh < TMath::Cos(150.0 * TMath::DegToRad()))continue; //-0.866
     if (costh > TMath::Cos(17.0 * TMath::DegToRad())) continue; //0.95
  
  
     double injtime = dedxTrack.getInjectionTime();
     double injring = dedxTrack.getInjectionRing();
  
     //--------REMOVEBAL--------
     //when CDST are reproduced with injection time
     if (injtime == -1 || injring == -1) {
       if (m_TTDInfo.isValid() && m_TTDInfo->hasInjection()) {
         injring = m_TTDInfo->isHER();
         injtime =  m_TTDInfo->getTimeSinceLastInjectionInMicroSeconds();
       }
     }
     dedxTrack.m_injring = injring;
     dedxTrack.m_injtime = injtime;
     //--------REMOVEBAL--------
  
     for (int i = 0; i < nhits; ++i) {
  
       //pay attention to deadwire or gain uses
       //getADCount is already corrected w/ non linear ADC payload
       //getADCbasecount is now uncorrect ADC
       int jadcbase = dedxTrack.getADCBaseCount(i);
       double jLayer = dedxTrack.getHitLayer(i);
       double jWire = dedxTrack.getWire(i);
       double jNDocaRS = dedxTrack.getDocaRS(i) / dedxTrack.getCellHalfWidth(i);
       double jEntaRS = dedxTrack.getEntaRS(i);
       double jPath = dedxTrack.getPath(i);
  
       double correction = dedxTrack.m_scale * dedxTrack.m_runGain * dedxTrack.m_timeGain * dedxTrack.m_cosCor * dedxTrack.m_cosEdgeCor *
                           dedxTrack.getTwoDCorrection(i) * dedxTrack.getOneDCorrection(i) * dedxTrack.getNonLADCCorrection(i);
       if (dedxTrack.getWireGain(i) > 0)correction *= dedxTrack.getWireGain(i); //also keep dead wire
  
       //Modify hit level dedx
       double newhitdedx = (m_relative) ? 1 / correction : 1.0;
       StandardCorrection(jadcbase, jLayer, jWire, jNDocaRS, jEntaRS, jPath, costh, injring, injtime, newhitdedx);
       dedxTrack.setDedx(i, newhitdedx);
  
       // do track level dedx and modifiy after loop over hits
       // rel const -> upto 6 from calibrated GT and 2 are direct from dedx track (no rel cal for them now)
       // abs const -> upto 6 from calibrated GT and 2 are direct from default GT
       if (m_relative) {
         //prewire gains need old tracks (old bad wire) and post need track new wg (new dead wire)
         //get same base adc + rel correction factor
         correction *= GetCorrection(jadcbase, jLayer, jWire, jNDocaRS, jEntaRS, costh, injring, injtime);
         if (!m_DBWireGains && dedxTrack.getWireGain(i) == 0)correction = 0;
       } else {
         //get modifed adc + abs correction factor
         correction = GetCorrection(jadcbase, jLayer, jWire, jNDocaRS, jEntaRS, costh, injring, injtime);
       }
  
       // combine hits accross layers
       if (correction != 0) {
         newLayerDe += jadcbase / correction;
         newLayerDx += jPath;
       }
  
       if (i + 1 < nhits && dedxTrack.getHitLayer(i + 1) == jLayer) {
         continue;
       } else {
         if (newLayerDx != 0)newLayerHits.push_back(newLayerDe / newLayerDx * std::sqrt(1 - costh * costh));
         newLayerDe = 0;
         newLayerDx = 0;
       }
     }
  
     // recalculate the truncated means
     calculateMeans(&(dedxTrack.m_dedxAvg),
                    &(dedxTrack.m_dedxAvgTruncatedNoSat),
                    &(dedxTrack.m_dedxAvgTruncatedErr),
                    newLayerHits);
  
     dedxTrack.m_dedxAvgTruncated = dedxTrack.m_dedxAvgTruncatedNoSat;
     HadronCorrection(costh, dedxTrack.m_dedxAvgTruncated);
   } // end loop over tracks
 }

◆ getAfterConditionPath()

Module::EAfterConditionPath getAfterConditionPath ( ) const

inherited

What to do after the conditional path is finished.

(defaults to c_End if no condition is set)

Definition at line 133 of file Module.cc.

◆ getConditionPath()

std::shared_ptr< Path > getConditionPath ( ) const

inherited

Returns the path of the last true condition (if there is at least one, else reaturn a null pointer).

Definition at line 113 of file Module.cc.

◆ getFileNames()

virtual std::vector<std::string> getFileNames ( bool outputFiles )

inlinevirtualinherited

Return a list of output filenames for this modules.

This will be called when basf2 is run with "--dry-run" if the module has set either the c_Input or c_Output properties.

If the parameter outputFiles is false (for modules with c_Input) the list of input filenames should be returned (if any). If outputFiles is true (for modules with c_Output) the list of output files should be returned (if any).

If a module has sat both properties this member is called twice, once for each property.

The module should return the actual list of requested input or produced output filenames (including handling of input/output overrides) so that the grid system can handle input/output files correctly.

This function should return the same value when called multiple times. This is especially important when taking the input/output overrides from Environment as they get consumed when obtained so the finalized list of output files should be stored for subsequent calls.

Reimplemented in RootOutputModule, StorageRootOutputModule, and RootInputModule.

Definition at line 134 of file Module.h.

◆ getName()

const std::string& getName ( ) const

inlineinherited

Returns the name of the module.

This can be changed via e.g. set_name() in the steering file to give more useful names if there is more than one module of the same type.

For identifying the type of a module, using getType() (or type() in Python) is recommended.

Definition at line 187 of file Module.h.

◆ getParamInfoListPython()

std::shared_ptr< boost::python::list > getParamInfoListPython ( ) const

inherited

Returns a python list of all parameters.

Each item in the list consists of the name of the parameter, a string describing its type, a python list of all default values and the description of the parameter.

Returns: A python list containing the parameters of this parameter list.

Definition at line 279 of file Module.cc.

◆ getReturnValue()

int getReturnValue ( ) const

inlineinherited

Return the return value set by this module.

This value is only meaningful if hasReturnValue() is true

Definition at line 381 of file Module.h.

◆ getType()

const std::string & getType ( ) const

inherited

Returns the type of the module (i.e.

class name minus 'Module')

Definition at line 41 of file Module.cc.

◆ HadronCorrection()

void HadronCorrection	(	double	costheta,
		double &	dedx
	)		const

Perform a hadron saturation correction.

(Set the peak of the truncated mean for electrons to 1)

Definition at line 262 of file CDCDedxCorrectionModule.cc.

◆ hasProperties()

bool hasProperties ( unsigned int propertyFlags ) const

inherited

Returns true if all specified property flags are available in this module.

Parameters

propertyFlags Ored EModulePropFlags which should be compared with the module flags.

Definition at line 160 of file Module.cc.

◆ if_false()

void if_false	(	const std::shared_ptr< Path > &	path,
		EAfterConditionPath	afterConditionPath = `EAfterConditionPath::c_End`
	)

inherited

A simplified version to add a condition to the module.

Please note that successive calls of this function will add more than one condition to the module. If more than one condition results in true, only the last of them will be used.

Please be careful: Avoid creating cyclic paths, e.g. by linking a condition to a path which is processed before the path where this module is located in.

It is equivalent to the if_value() method, using the expression "<1". This method is meant to be used together with the setReturnValue(bool value) method.

Parameters

path	Shared pointer to the Path which will be executed if the return value is false.
afterConditionPath	What to do after executing 'path'.

Definition at line 85 of file Module.cc.

◆ if_true()

void if_true	(	const std::shared_ptr< Path > &	path,
		EAfterConditionPath	afterConditionPath = `EAfterConditionPath::c_End`
	)

inherited

A simplified version to set the condition of the module.

Please note that successive calls of this function will add more than one condition to the module. If more than one condition results in true, only the last of them will be used.

Please be careful: Avoid creating cyclic paths, e.g. by linking a condition to a path which is processed before the path where this module is located in.

It is equivalent to the if_value() method, using the expression ">=1". This method is meant to be used together with the setReturnValue(bool value) method.

Parameters

path	Shared pointer to the Path which will be executed if the return value is true.
afterConditionPath	What to do after executing 'path'.

Definition at line 90 of file Module.cc.

◆ if_value()

void if_value	(	const std::string &	expression,
		const std::shared_ptr< Path > &	path,
		EAfterConditionPath	afterConditionPath = `EAfterConditionPath::c_End`
	)

inherited

Add a condition to the module.

Please note that successive calls of this function will add more than one condition to the module. If more than one condition results in true, only the last of them will be used.

See https://confluence.desy.de/display/BI/Software+ModCondTut or ModuleCondition for a description of the syntax.

Please be careful: Avoid creating cyclic paths, e.g. by linking a condition to a path which is processed before the path where this module is located in.

Parameters

expression	The expression of the condition.
path	Shared pointer to the Path which will be executed if the condition is evaluated to true.
afterConditionPath	What to do after executing 'path'.

Definition at line 79 of file Module.cc.

◆ initialize()

void initialize ( void )

overridevirtual

Initialize the Module.

This method is called only once before the actual event processing starts.

Reimplemented from Module.

Definition at line 39 of file CDCDedxCorrectionModule.cc.

◆ setDescription()

void setDescription ( const std::string & description )

protectedinherited

Sets the description of the module.

Parameters

description A description of the module.

Definition at line 214 of file Module.cc.

◆ setLogInfo()

void setLogInfo	(	int	logLevel,
		unsigned int	logInfo
	)

inherited

Configure the printed log information for the given level.

Parameters

logLevel	The log level (one of LogConfig::ELogLevel)
logInfo	What kind of info should be printed? ORed combination of LogConfig::ELogInfo flags.

Definition at line 73 of file Module.cc.

◆ setName()

void setName ( const std::string & name )

inlineinherited

Set the name of the module.

Note: The module name is set when using the REG_MODULE macro, but the module can be renamed before calling process() using the set_name() function in your steering file.

Parameters

name	The name of the module

Definition at line 214 of file Module.h.

◆ setParamPython()

void setParamPython	(	const std::string &	name,
		const boost::python::object &	pyObj
	)

privateinherited

Implements a method for setting boost::python objects.

The method supports the following types: list, dict, int, double, string, bool The conversion of the python object to the C++ type and the final storage of the parameter value is done in the ModuleParam class.

Parameters

name	The unique name of the parameter.
pyObj	The object which should be converted and stored as the parameter value.

Definition at line 234 of file Module.cc.

◆ setParamPythonDict()

void setParamPythonDict ( const boost::python::dict & dictionary )

privateinherited

Implements a method for reading the parameter values from a boost::python dictionary.

The key of the dictionary has to be the name of the parameter and the value has to be of one of the supported parameter types.

Parameters

dictionary The python dictionary from which the parameter values are read.

Definition at line 249 of file Module.cc.

◆ setPropertyFlags()

void setPropertyFlags ( unsigned int propertyFlags )

inherited

Sets the flags for the module properties.

Parameters

propertyFlags bitwise OR of EModulePropFlags

Definition at line 208 of file Module.cc.

◆ setReturnValue() [1/2]

void setReturnValue ( bool value )

protectedinherited

Sets the return value for this module as bool.

The bool value is saved as an integer with the convention 1 meaning true and 0 meaning false. The value can be used in the steering file to divide the analysis chain into several paths.

Parameters

value The value of the return value.

Definition at line 227 of file Module.cc.

◆ setReturnValue() [2/2]

void setReturnValue ( int value )

protectedinherited

Sets the return value for this module as integer.

The value can be used in the steering file to divide the analysis chain into several paths.

Parameters

value The value of the return value.

Definition at line 220 of file Module.cc.

◆ setType()

void setType ( const std::string & type )

protectedinherited

Set the module type.

Only for use by internal modules (which don't use the normal REG_MODULE mechanism).

Definition at line 48 of file Module.cc.

The documentation for this class was generated from the following files:

reconstruction/modules/CDCDedxCorrection/include/CDCDedxCorrectionModule.h
reconstruction/modules/CDCDedxCorrection/src/CDCDedxCorrectionModule.cc

Public Types

Public Member Functions

Static Public Member Functions

Protected Member Functions

Private Member Functions

Private Attributes

Detailed Description

Member Enumeration Documentation

◆ EModulePropFlags

Member Function Documentation

◆ beginRun()

◆ clone()

◆ def_endRun()

◆ def_initialize()

◆ endRun()

◆ evalCondition()

◆ event()

◆ getAfterConditionPath()

◆ getConditionPath()

◆ getFileNames()

◆ getName()

◆ getParamInfoListPython()

◆ getReturnValue()

◆ getType()

◆ HadronCorrection()

◆ hasProperties()

◆ if_false()

◆ if_true()

◆ if_value()

◆ initialize()

◆ setDescription()

◆ setLogInfo()

◆ setName()

◆ setParamPython()

◆ setParamPythonDict()

◆ setPropertyFlags()

◆ setReturnValue() [1/2]

◆ setReturnValue() [2/2]

◆ setType()