Bremsstrahlung finder correction module For each lepton in the input particle list, this module copies it to the output particle list and uses the results of the eclTrackBremFinder module to look for a possible bremsstrahlung photon; if this photon exists, adds its four momentum to the leptons in the output list. More...

#include <BremsFinderModule.h>

Inheritance diagram for BremsFinderModule:

[legend]

Collaboration diagram for BremsFinderModule:

[legend]

Public Types
enum	{ c_DimMatrix = 7 }

enum	EModulePropFlags { c_Input = 1 , c_Output = 2 , c_ParallelProcessingCertified = 4 , c_HistogramManager = 8 , c_InternalSerializer = 16 , c_TerminateInAllProcesses = 32 , c_DontCollectStatistics = 64 }
	Each module can be tagged with property flags, which indicate certain features of the module. More...

typedef ModuleCondition::EAfterConditionPath	EAfterConditionPath
	Forward the EAfterConditionPath definition from the ModuleCondition.

Public Member Functions
	BremsFinderModule ()
	Constructor, for setting module description and parameters.

virtual void	initialize () override
	Use this to initialize resources or memory your module needs. More...

virtual void	event () override
	Called once for each event. More...

virtual std::vector< std::string >	getFileNames (bool outputFiles)
	Return a list of output filenames for this modules. More...

virtual void	beginRun ()
	Called when entering a new run. More...

virtual void	endRun ()
	This method is called if the current run ends. More...

virtual void	terminate ()
	This method is called at the end of the event processing. More...

const std::string &	getName () const
	Returns the name of the module. More...

const std::string &	getType () const
	Returns the type of the module (i.e. More...

const std::string &	getPackage () const
	Returns the package this module is in.

const std::string &	getDescription () const
	Returns the description of the module.

void	setName (const std::string &name)
	Set the name of the module. More...

void	setPropertyFlags (unsigned int propertyFlags)
	Sets the flags for the module properties. More...

LogConfig &	getLogConfig ()
	Returns the log system configuration.

void	setLogConfig (const LogConfig &logConfig)
	Set the log system configuration.

void	setLogLevel (int logLevel)
	Configure the log level.

void	setDebugLevel (int debugLevel)
	Configure the debug messaging level.

void	setAbortLevel (int abortLevel)
	Configure the abort log level.

void	setLogInfo (int logLevel, unsigned int logInfo)
	Configure the printed log information for the given level. More...

void	if_value (const std::string &expression, const std::shared_ptr< Path > &path, EAfterConditionPath afterConditionPath=EAfterConditionPath::c_End)
	Add a condition to the module. More...

void	if_false (const std::shared_ptr< Path > &path, EAfterConditionPath afterConditionPath=EAfterConditionPath::c_End)
	A simplified version to add a condition to the module. More...

void	if_true (const std::shared_ptr< Path > &path, EAfterConditionPath afterConditionPath=EAfterConditionPath::c_End)
	A simplified version to set the condition of the module. More...

bool	hasCondition () const
	Returns true if at least one condition was set for the module.

const ModuleCondition *	getCondition () const
	Return a pointer to the first condition (or nullptr, if none was set)

const std::vector< ModuleCondition > &	getAllConditions () const
	Return all set conditions for this module.

bool	evalCondition () const
	If at least one condition was set, it is evaluated and true returned if at least one condition returns true. More...

std::shared_ptr< Path >	getConditionPath () const
	Returns the path of the last true condition (if there is at least one, else reaturn a null pointer). More...

Module::EAfterConditionPath	getAfterConditionPath () const
	What to do after the conditional path is finished. More...

std::vector< std::shared_ptr< Path > >	getAllConditionPaths () const
	Return all condition paths currently set (no matter if the condition is true or not).

bool	hasProperties (unsigned int propertyFlags) const
	Returns true if all specified property flags are available in this module. More...

bool	hasUnsetForcedParams () const
	Returns true and prints error message if the module has unset parameters which the user has to set in the steering file.

const ModuleParamList &	getParamList () const
	Return module param list.

template<typename T >
ModuleParam< T > &	getParam (const std::string &name) const
	Returns a reference to a parameter. More...

bool	hasReturnValue () const
	Return true if this module has a valid return value set.

int	getReturnValue () const
	Return the return value set by this module. More...

std::shared_ptr< PathElement >	clone () const override
	Create an independent copy of this module. More...

std::shared_ptr< boost::python::list >	getParamInfoListPython () const
	Returns a python list of all parameters. More...

Static Public Member Functions
static void	exposePythonAPI ()
	Exposes methods of the Module class to Python.

Protected Member Functions
virtual void	def_initialize ()
	Wrappers to make the methods without "def_" prefix callable from Python. More...

virtual void	def_beginRun ()
	Wrapper method for the virtual function beginRun() that has the implementation to be used in a call from Python.

virtual void	def_event ()
	Wrapper method for the virtual function event() that has the implementation to be used in a call from Python.

virtual void	def_endRun ()
	This method can receive that the current run ends as a call from the Python side. More...

virtual void	def_terminate ()
	Wrapper method for the virtual function terminate() that has the implementation to be used in a call from Python.

void	setDescription (const std::string &description)
	Sets the description of the module. More...

void	setType (const std::string &type)
	Set the module type. More...

template<typename T >
void	addParam (const std::string &name, T &paramVariable, const std::string &description, const T &defaultValue)
	Adds a new parameter to the module. More...

template<typename T >
void	addParam (const std::string &name, T &paramVariable, const std::string &description)
	Adds a new enforced parameter to the module. More...

void	setReturnValue (int value)
	Sets the return value for this module as integer. More...

void	setReturnValue (bool value)
	Sets the return value for this module as bool. More...

void	setParamList (const ModuleParamList &params)
	Replace existing parameter list.

Private Member Functions
std::list< ModulePtr >	getModules () const override
	no submodules, return empty list

std::string	getPathString () const override
	return the module name.

void	setParamPython (const std::string &name, const boost::python::object &pyObj)
	Implements a method for setting boost::python objects. More...

void	setParamPythonDict (const boost::python::dict &dictionary)
	Implements a method for reading the parameter values from a boost::python dictionary. More...

Private Attributes
std::string	m_inputListName
	input particle list name

std::string	m_gammaListName
	input gamma list name

std::string	m_outputListName
	output particle list name

std::string	m_outputAntiListName
	output anti-particle list name

int	m_pdgCode
	PDG code of the particle to be corrected.

StoreObjPtr< ParticleList >	m_inputList
	StoreObjptr for input charged particle list.

StoreObjPtr< ParticleList >	m_gammaList
	StoreObjptr for gamma list.

StoreObjPtr< ParticleList >	m_outputList
	StoreObjptr for output particlelist.

StoreObjPtr< ParticleList >	m_outputAntiList
	StoreObjptr for output antiparticlelist.

StoreArray< Particle >	m_particles
	StoreArray of Particle objects.

StoreArray< MCParticle >	m_mcParticles
	StoreArray of MCParticle objects.

StoreArray< PIDLikelihood >	m_pidlikelihoods
	StoreArray of PIDLikelihood objects.

double	m_maximumAcceptance
	photons whose clusters have relation weights higher than this will not be used for bremsstrahlung correction of the track More...

bool	m_addMultiplePhotons
	In case there is more than one brems photon, use only the best one (based on the weight of the relation), or all of them for correcting the lepton momentum. More...

bool	m_usePhotonOnlyOnce
	Each brems photon can be used to correct only one particle (the one with the smallest relation weight) More...

bool	m_writeOut = false
	Write the output particle list in the final file?

std::string	m_name
	The name of the module, saved as a string (user-modifiable)

std::string	m_type
	The type of the module, saved as a string.

std::string	m_package
	Package this module is found in (may be empty).

std::string	m_description
	The description of the module.

unsigned int	m_propertyFlags
	The properties of the module as bitwise or (with \|) of EModulePropFlags.

LogConfig	m_logConfig
	The log system configuration of the module.

ModuleParamList	m_moduleParamList
	List storing and managing all parameter of the module.

bool	m_hasReturnValue
	True, if the return value is set.

int	m_returnValue
	The return value.

std::vector< ModuleCondition >	m_conditions
	Module condition, only non-null if set.

Detailed Description

Bremsstrahlung finder correction module For each lepton in the input particle list, this module copies it to the output particle list and uses the results of the eclTrackBremFinder module to look for a possible bremsstrahlung photon; if this photon exists, adds its four momentum to the leptons in the output list.

It also adds the original lepton and this photon as daughters of the corrected lepton. Track and PID information of the original lepton are copied to the new one to facilitate their access in the analysis scripts.

The eclTrackBremFinder module uses the lepton track PXD and SVD hits and extrapolates them to the ECL; then looks for ECL clusters with energies between 0.2 and 1 times the track energy and without associated tracks, and checks if the distance between these clusters and the extrapolated tracks is smaller than 0.05. If it is, the cluster is marked as a bremsstrahlung, and a weighted relation between the track and the cluster is established. The weight is determined by the maximum between two values:

The difference in phi divided by the sum of the errors in the measurements of the cluster and the hit phi coordinate
The difference in theta divided by the sum of the errors in the measurements of the cluster and the hit theta coordinate

The user can determine the minimum value of this weight required in order to perform the Bremsstrahlung correction

Definition at line 48 of file BremsFinderModule.h.

Member Enumeration Documentation

◆ EModulePropFlags

enum EModulePropFlags

inherited

Each module can be tagged with property flags, which indicate certain features of the module.

Enumerator
c_Input	This module is an input module (reads data).
c_Output	This module is an output module (writes data).
c_ParallelProcessingCertified	This module can be run in parallel processing mode safely (All I/O must be done through the data store, in particular, the module must not write any files.)
c_HistogramManager	This module is used to manage histograms accumulated by other modules.
c_InternalSerializer	This module is an internal serializer/deserializer for parallel processing.
c_TerminateInAllProcesses	When using parallel processing, call this module's terminate() function in all processes(). This will also ensure that there is exactly one process (single-core if no parallel modules found) or at least one input, one main and one output process.
c_DontCollectStatistics	No statistics is collected for this module.

Definition at line 77 of file Module.h.

Member Function Documentation

◆ beginRun()

virtual void beginRun ( void )

inlinevirtualinherited

Called when entering a new run.

Called at the beginning of each run, the method gives you the chance to change run dependent constants like alignment parameters, etc.

This method can be implemented by subclasses.

Definition at line 147 of file Module.h.

◆ clone()

std::shared_ptr< PathElement > clone ( ) const

overridevirtualinherited

Create an independent copy of this module.

Note that parameters are shared, so changing them on a cloned module will also affect the original module.

Implements PathElement.

Definition at line 179 of file Module.cc.

◆ def_endRun()

virtual void def_endRun ( )

inlineprotectedvirtualinherited

This method can receive that the current run ends as a call from the Python side.

For regular C++-Modules that forwards the call to the regular endRun() method.

Reimplemented in PyModule.

Definition at line 439 of file Module.h.

◆ def_initialize()

virtual void def_initialize ( )

inlineprotectedvirtualinherited

Wrappers to make the methods without "def_" prefix callable from Python.

Overridden in PyModule. Wrapper method for the virtual function initialize() that has the implementation to be used in a call from Python.

Reimplemented in PyModule.

Definition at line 420 of file Module.h.

◆ endRun()

virtual void endRun ( void )

inlinevirtualinherited

This method is called if the current run ends.

Use this method to store information, which should be aggregated over one run.

This method can be implemented by subclasses.

Definition at line 166 of file Module.h.

◆ evalCondition()

bool evalCondition ( ) const

inherited

If at least one condition was set, it is evaluated and true returned if at least one condition returns true.

If no condition or result value was defined, the method returns false. Otherwise, the condition is evaluated and true returned, if at least one condition returns true. To speed up the evaluation, the condition strings were already parsed in the method if_value().

Returns: True if at least one condition and return value exists and at least one condition expression was evaluated to true.

Definition at line 96 of file Module.cc.

◆ event()

void event ( void )

overridevirtual

Called once for each event.

This is most likely where your module will actually do anything.

Reimplemented from Module.

Definition at line 159 of file BremsFinderModule.cc.

 {
   RelationArray particlesToMCParticles(m_particles, m_mcParticles);
  
   // new output particle list
   m_outputList.create();
   m_outputList->initialize(m_pdgCode, m_outputListName);
  
   m_outputAntiList.create();
   m_outputAntiList->initialize(-1 * m_pdgCode, m_outputAntiListName);
   m_outputAntiList->bindAntiParticleList(*(m_outputList));
  
   // Number of photons (calculate it here only once)
   const unsigned int nGamma = m_gammaList->getListSize();
  
   // Number of leptons (calculate it here only once)
   const unsigned int nLep = m_inputList->getListSize();
  
   const std::string relationName = "Bremsstrahlung";
  
   //In the case of only one track per photon
   if (m_usePhotonOnlyOnce) {
     for (unsigned n = 0; n < nGamma; n++) {
       Particle* gamma = m_gammaList->getParticle(n);
       //Skip this if it the best match has already been assigned (pathological case: happens only if you use the same gamma list
       //to correct more than once. Performance studies, in which the same list is used with different options, are an example
       if (gamma->hasExtraInfo("bestMatchIndex")) continue;
  
       auto cluster = gamma->getECLCluster();
       //Get the tracks related to each photon...
       RelationVector<Track> relatedTracks = cluster->getRelationsTo<Track>("", relationName);
       double bestWeight = m_maximumAcceptance;
       unsigned bestMatchIndex = 0;
       unsigned trkIndex = 0;
       //Loop over the related tracks...
       for (auto trk = relatedTracks.begin(); trk != relatedTracks.end(); trk++, trkIndex++) {
         //... and over the input particles' tracks...
         for (unsigned i = 0; i < nLep; i++) {
           const Particle* lepton = m_inputList->getParticle(i);
           auto leptonTrack = lepton->getTrack();
           //... check that the particle track corresponds to the related track....
           if (leptonTrack->getArrayIndex() == trk->getArrayIndex()) {
             double weight = relatedTracks.weight(trkIndex);
             if (weight < bestWeight) {
               bestWeight = weight;
               //... and only select the best match among the tracks in the input list
               bestMatchIndex = trk->getArrayIndex();
             }
             break; //If the particle corresponding to the related track is found, break the loop over the particles and go for the next related track
           }
         }
       }
       //... finally, add the best match index as an extra info for the photon
       gamma->addExtraInfo("bestMatchIndex", bestMatchIndex);
     }
   }
  
   // loop over charged particles, correct them and add them to the output list
  
   for (unsigned i = 0; i < nLep; i++) {
     const Particle* lepton = m_inputList->getParticle(i);
  
     //Get the track of this lepton...
     auto track = lepton->getTrack();
  
     //... and get the bremsstrahlung clusters related to this track
     RelationVector<ECLCluster> bremClusters = track->getRelationsFrom<ECLCluster>("", relationName);
  
     std::vector<std::pair <double, Particle*> > selectedGammas;
  
     unsigned j = 0;
     for (auto bremCluster = bremClusters.begin(); bremCluster != bremClusters.end(); bremCluster++, j++) {
       double weight = bremClusters.weight(j);
  
       if (weight > m_maximumAcceptance) continue;
  
       for (unsigned k = 0; k < nGamma; k++) {
  
         Particle* gamma = m_gammaList->getParticle(k);
         auto cluster = gamma->getECLCluster();
  
         if (bremCluster->getClusterId() == cluster->getClusterId()) {
           if (m_usePhotonOnlyOnce) { //If only one track per photon should be used...
             if (track->getArrayIndex() == static_cast<int>
                 (gamma->getExtraInfo("bestMatchIndex")))      //... check if this track is the best match ...
               selectedGammas.push_back(std::make_pair(weight, gamma)); //... and if it is, add it to the selected gammas
           } else {
             selectedGammas.push_back(std::make_pair(weight, gamma));
           }
         }
  
       } // Closes for loop on gammas
  
     } // Closes for loop on brem clusters
  
     //The 4-momentum of the new lepton in the output particle list
     ROOT::Math::PxPyPzEVector new4Vec = lepton->get4Vector();
  
     //Sort weight-particle pairs by weight. Smaller weights go first
     std::sort(selectedGammas.begin(), selectedGammas.end());
  
     //Add to this 4-momentum those of the selected photon(s)
     for (auto const& bremsPair : selectedGammas) {
       Particle* g = bremsPair.second;
       new4Vec += g->get4Vector();
       if (! m_addMultiplePhotons) break; //stop after adding the first photon
     }
  
     //Create the new particle with the 4-momentum calculated before
     Particle correctedLepton(new4Vec, lepton->getPDGCode(), Particle::EFlavorType::c_Flavored, Particle::c_Track,
                              track->getArrayIndex());
  
     //And add the original lepton as its daughter
     correctedLepton.appendDaughter(lepton, false);
  
     const TMatrixFSym& lepErrorMatrix = lepton->getMomentumVertexErrorMatrix();
     TMatrixFSym corLepMatrix(lepErrorMatrix);
  
     double bremsGammaEnergySum = 0.0;
     //Now, if there are any, add the brems photons as daughters as well. As before, we distinguish between the multiple and only one brems photon cases
     int photonIndex = 0;
     for (auto const& bremsPair : selectedGammas) {
       //Add the weights as extra info of the mother
       Particle* bremsGamma = bremsPair.second;
       std::string extraInfoName = "bremsWeightWithPhoton" + std::to_string(photonIndex);
       correctedLepton.addExtraInfo(extraInfoName, bremsPair.first);
       photonIndex++;
       bremsGammaEnergySum += Variable::eclClusterE(bremsGamma);
  
       const TMatrixFSym& gammaErrorMatrix = bremsGamma->getMomentumVertexErrorMatrix();
       for (int irow = 0; irow <= 3; irow++) {
         for (int icol = irow; icol <= 3; icol++) corLepMatrix(irow, icol) += gammaErrorMatrix(irow, icol);
       }
       correctedLepton.appendDaughter(bremsGamma, false);
       B2DEBUG(10, "[BremsFinderModule] Found a bremsstrahlung gamma and added its 4-vector to the charged particle");
       if (! m_addMultiplePhotons) break; //stop after adding the first photon
     }
  
     correctedLepton.setMomentumVertexErrorMatrix(corLepMatrix);
  
     // add the info from original lepton to the new lepton
     correctedLepton.setVertex(lepton->getVertex());
     correctedLepton.setPValue(lepton->getPValue());
     correctedLepton.addExtraInfo("bremsCorrected", float(selectedGammas.size() > 0));
     correctedLepton.addExtraInfo("bremsCorrectedPhotonEnergy", bremsGammaEnergySum);
  
     // add the mc relation
     Particle* newLepton = m_particles.appendNew(correctedLepton);
     const MCParticle* mcLepton = lepton->getRelated<MCParticle>();
     const PIDLikelihood* pid = lepton->getPIDLikelihood();
  
     if (pid) newLepton->addRelationTo(pid);
  
     if (mcLepton != nullptr) newLepton->addRelationTo(mcLepton);
  
     m_outputList->addParticle(newLepton);
  
   } //Closes for loop on leptons
  
 } //Close event()

◆ getAfterConditionPath()

Module::EAfterConditionPath getAfterConditionPath ( ) const

inherited

What to do after the conditional path is finished.

(defaults to c_End if no condition is set)

Definition at line 133 of file Module.cc.

◆ getConditionPath()

std::shared_ptr< Path > getConditionPath ( ) const

inherited

Returns the path of the last true condition (if there is at least one, else reaturn a null pointer).

Definition at line 113 of file Module.cc.

◆ getFileNames()

virtual std::vector<std::string> getFileNames ( bool outputFiles )

inlinevirtualinherited

Return a list of output filenames for this modules.

This will be called when basf2 is run with "--dry-run" if the module has set either the c_Input or c_Output properties.

If the parameter outputFiles is false (for modules with c_Input) the list of input filenames should be returned (if any). If outputFiles is true (for modules with c_Output) the list of output files should be returned (if any).

If a module has sat both properties this member is called twice, once for each property.

The module should return the actual list of requested input or produced output filenames (including handling of input/output overrides) so that the grid system can handle input/output files correctly.

This function should return the same value when called multiple times. This is especially important when taking the input/output overrides from Environment as they get consumed when obtained so the finalized list of output files should be stored for subsequent calls.

Reimplemented in RootOutputModule, StorageRootOutputModule, and RootInputModule.

Definition at line 134 of file Module.h.

◆ getName()

const std::string& getName ( ) const

inlineinherited

Returns the name of the module.

This can be changed via e.g. set_name() in the steering file to give more useful names if there is more than one module of the same type.

For identifying the type of a module, using getType() (or type() in Python) is recommended.

Definition at line 187 of file Module.h.

◆ getParamInfoListPython()

std::shared_ptr< boost::python::list > getParamInfoListPython ( ) const

inherited

Returns a python list of all parameters.

Each item in the list consists of the name of the parameter, a string describing its type, a python list of all default values and the description of the parameter.

Returns: A python list containing the parameters of this parameter list.

Definition at line 279 of file Module.cc.

◆ getReturnValue()

int getReturnValue ( ) const

inlineinherited

Return the return value set by this module.

This value is only meaningful if hasReturnValue() is true

Definition at line 381 of file Module.h.

◆ getType()

const std::string & getType ( ) const

inherited

Returns the type of the module (i.e.

class name minus 'Module')

Definition at line 41 of file Module.cc.

◆ hasProperties()

bool hasProperties ( unsigned int propertyFlags ) const

inherited

Returns true if all specified property flags are available in this module.

Parameters

propertyFlags Ored EModulePropFlags which should be compared with the module flags.

Definition at line 160 of file Module.cc.

◆ if_false()

void if_false	(	const std::shared_ptr< Path > &	path,
		EAfterConditionPath	afterConditionPath = `EAfterConditionPath::c_End`
	)

inherited

A simplified version to add a condition to the module.

Please note that successive calls of this function will add more than one condition to the module. If more than one condition results in true, only the last of them will be used.

Please be careful: Avoid creating cyclic paths, e.g. by linking a condition to a path which is processed before the path where this module is located in.

It is equivalent to the if_value() method, using the expression "<1". This method is meant to be used together with the setReturnValue(bool value) method.

Parameters

path	Shared pointer to the Path which will be executed if the return value is false.
afterConditionPath	What to do after executing 'path'.

Definition at line 85 of file Module.cc.

◆ if_true()

void if_true	(	const std::shared_ptr< Path > &	path,
		EAfterConditionPath	afterConditionPath = `EAfterConditionPath::c_End`
	)

inherited

A simplified version to set the condition of the module.

Please note that successive calls of this function will add more than one condition to the module. If more than one condition results in true, only the last of them will be used.

Please be careful: Avoid creating cyclic paths, e.g. by linking a condition to a path which is processed before the path where this module is located in.

It is equivalent to the if_value() method, using the expression ">=1". This method is meant to be used together with the setReturnValue(bool value) method.

Parameters

path	Shared pointer to the Path which will be executed if the return value is true.
afterConditionPath	What to do after executing 'path'.

Definition at line 90 of file Module.cc.

◆ if_value()

void if_value	(	const std::string &	expression,
		const std::shared_ptr< Path > &	path,
		EAfterConditionPath	afterConditionPath = `EAfterConditionPath::c_End`
	)

inherited

Add a condition to the module.

Please note that successive calls of this function will add more than one condition to the module. If more than one condition results in true, only the last of them will be used.

See https://confluence.desy.de/display/BI/Software+ModCondTut or ModuleCondition for a description of the syntax.

Please be careful: Avoid creating cyclic paths, e.g. by linking a condition to a path which is processed before the path where this module is located in.

Parameters

expression	The expression of the condition.
path	Shared pointer to the Path which will be executed if the condition is evaluated to true.
afterConditionPath	What to do after executing 'path'.

Definition at line 79 of file Module.cc.

◆ initialize()

void initialize ( void )

overridevirtual

Use this to initialize resources or memory your module needs.

Also register any outputs of your module (StoreArrays, RelationArrays, StoreObjPtrs) here, see the respective class documentation for details.

Reimplemented from Module.

Definition at line 115 of file BremsFinderModule.cc.

◆ setDescription()

void setDescription ( const std::string & description )

protectedinherited

Sets the description of the module.

Parameters

description A description of the module.

Definition at line 214 of file Module.cc.

◆ setLogInfo()

void setLogInfo	(	int	logLevel,
		unsigned int	logInfo
	)

inherited

Configure the printed log information for the given level.

Parameters

logLevel	The log level (one of LogConfig::ELogLevel)
logInfo	What kind of info should be printed? ORed combination of LogConfig::ELogInfo flags.

Definition at line 73 of file Module.cc.

◆ setName()

void setName ( const std::string & name )

inlineinherited

Set the name of the module.

Note: The module name is set when using the REG_MODULE macro, but the module can be renamed before calling process() using the set_name() function in your steering file.

Parameters

name	The name of the module

Definition at line 214 of file Module.h.

◆ setParamPython()

void setParamPython	(	const std::string &	name,
		const boost::python::object &	pyObj
	)

privateinherited

Implements a method for setting boost::python objects.

The method supports the following types: list, dict, int, double, string, bool The conversion of the python object to the C++ type and the final storage of the parameter value is done in the ModuleParam class.

Parameters

name	The unique name of the parameter.
pyObj	The object which should be converted and stored as the parameter value.

Definition at line 234 of file Module.cc.

◆ setParamPythonDict()

void setParamPythonDict ( const boost::python::dict & dictionary )

privateinherited

Implements a method for reading the parameter values from a boost::python dictionary.

The key of the dictionary has to be the name of the parameter and the value has to be of one of the supported parameter types.

Parameters

dictionary The python dictionary from which the parameter values are read.

Definition at line 249 of file Module.cc.

◆ setPropertyFlags()

void setPropertyFlags ( unsigned int propertyFlags )

inherited

Sets the flags for the module properties.

Parameters

propertyFlags bitwise OR of EModulePropFlags

Definition at line 208 of file Module.cc.

◆ setReturnValue() [1/2]

void setReturnValue ( bool value )

protectedinherited

Sets the return value for this module as bool.

The bool value is saved as an integer with the convention 1 meaning true and 0 meaning false. The value can be used in the steering file to divide the analysis chain into several paths.

Parameters

value The value of the return value.

Definition at line 227 of file Module.cc.

◆ setReturnValue() [2/2]

void setReturnValue ( int value )

protectedinherited

Sets the return value for this module as integer.

The value can be used in the steering file to divide the analysis chain into several paths.

Parameters

value The value of the return value.

Definition at line 220 of file Module.cc.

◆ setType()

void setType ( const std::string & type )

protectedinherited

Set the module type.

Only for use by internal modules (which don't use the normal REG_MODULE mechanism).

Definition at line 48 of file Module.cc.

◆ terminate()

virtual void terminate ( void )

inlinevirtualinherited

This method is called at the end of the event processing.

This method is called only once after the event processing finished. Use this method for cleaning up, closing files, etc.

This method can be implemented by subclasses.

Definition at line 176 of file Module.h.

Member Data Documentation

◆ m_addMultiplePhotons

bool m_addMultiplePhotons

private

Initial value:

=

false

In case there is more than one brems photon, use only the best one (based on the weight of the relation), or all of them for correcting the lepton momentum.

Definition at line 85 of file BremsFinderModule.h.

◆ m_maximumAcceptance

double m_maximumAcceptance

private

Initial value:

=

3.0f

photons whose clusters have relation weights higher than this will not be used for bremsstrahlung correction of the track

Definition at line 83 of file BremsFinderModule.h.

◆ m_usePhotonOnlyOnce

bool m_usePhotonOnlyOnce

private

Initial value:

=

false

Each brems photon can be used to correct only one particle (the one with the smallest relation weight)

Definition at line 87 of file BremsFinderModule.h.

The documentation for this class was generated from the following files:

analysis/modules/BremsCorrection/include/BremsFinderModule.h
analysis/modules/BremsCorrection/src/BremsFinderModule.cc

Public Types

Public Member Functions

Static Public Member Functions

Protected Member Functions

Private Member Functions

Private Attributes

Detailed Description

Member Enumeration Documentation

◆ EModulePropFlags

Member Function Documentation

◆ beginRun()

◆ clone()

◆ def_endRun()

◆ def_initialize()

◆ endRun()

◆ evalCondition()

◆ event()

◆ getAfterConditionPath()

◆ getConditionPath()

◆ getFileNames()

◆ getName()

◆ getParamInfoListPython()

◆ getReturnValue()

◆ getType()

◆ hasProperties()

◆ if_false()

◆ if_true()

◆ if_value()

◆ initialize()

◆ setDescription()

◆ setLogInfo()

◆ setName()

◆ setParamPython()

◆ setParamPythonDict()

◆ setPropertyFlags()

◆ setReturnValue() [1/2]

◆ setReturnValue() [2/2]

◆ setType()

◆ terminate()

Member Data Documentation

◆ m_addMultiplePhotons

◆ m_maximumAcceptance

◆ m_usePhotonOnlyOnce