CDCDedxCorrectionModule Class Reference

This module may be used to apply the corrections to dE/dx per the calibration constants. More...

#include <CDCDedxCorrectionModule.h>

Inheritance diagram for CDCDedxCorrectionModule:

Public Types
enum	EModulePropFlags {   c_Input = 1 ,   c_Output = 2 ,   c_ParallelProcessingCertified = 4 ,   c_HistogramManager = 8 ,   c_InternalSerializer = 16 ,   c_TerminateInAllProcesses = 32 ,   c_DontCollectStatistics = 64 }
	Each module can be tagged with property flags, which indicate certain features of the module. More...
typedef ModuleCondition::EAfterConditionPath	EAfterConditionPath
	Forward the EAfterConditionPath definition from the ModuleCondition.

Public Member Functions
	CDCDedxCorrectionModule ()
	Constructor.
virtual	~CDCDedxCorrectionModule ()
	Destructor.
virtual void	initialize () override
	Initialize the Module.
virtual void	event () override
	This method is called for each event.
virtual void	terminate () override
	End of the event processing.
void	RunGainCorrection (double &dedx) const
	Perform a run gain correction.
void	TimeGainCorrection (double &dedx, double ring, double time) const
	Perform a injection time gain correction.
void	WireGainCorrection (int wireID, double &dedx, int layer) const
	Perform a wire gain correction.
void	TwoDCorrection (int layer, double doca, double enta, double &dedx) const
	Perform a 2D correction.
void	OneDCorrection (int layer, double enta, double &dedx) const
	Perform a wire gain correction.
void	CosineCorrection (double costheta, double &dedx) const
	Perform the cosine correction.
void	CosineEdgeCorrection (double costh, double &dedx) const
	Perform the cosine edge correction.
void	HadronCorrection (double costheta, double &dedx) const
	Perform a hadron saturation correction.
void	StandardCorrection (int adc, int layer, int wireID, double doca, double enta, double length, double costheta, double ring, double time, double &dedx) const
	Perform a standard set of corrections.
double	GetCorrection (int &adc, int layer, int wireID, double doca, double enta, double costheta, double ring, double time) const
	Get the standard set of corrections.
double	D2I (const double cosTheta, const double D) const
	Saturation correction: convert the measured ionization (D) to actual ionization (I)
double	I2D (const double cosTheta, const double I) const
	Saturation correction: convert the actural ionization (I) to measured ionization (D)
virtual std::vector< std::string >	getFileNames (bool outputFiles)
	Return a list of output filenames for this modules.
virtual void	beginRun ()
	Called when entering a new run.
virtual void	endRun ()
	This method is called if the current run ends.
const std::string &	getName () const
	Returns the name of the module.
const std::string &	getType () const
	Returns the type of the module (i.e.
const std::string &	getPackage () const
	Returns the package this module is in.
const std::string &	getDescription () const
	Returns the description of the module.
void	setName (const std::string &name)
	Set the name of the module.
void	setPropertyFlags (unsigned int propertyFlags)
	Sets the flags for the module properties.
LogConfig &	getLogConfig ()
	Returns the log system configuration.
void	setLogConfig (const LogConfig &logConfig)
	Set the log system configuration.
void	setLogLevel (int logLevel)
	Configure the log level.
void	setDebugLevel (int debugLevel)
	Configure the debug messaging level.
void	setAbortLevel (int abortLevel)
	Configure the abort log level.
void	setLogInfo (int logLevel, unsigned int logInfo)
	Configure the printed log information for the given level.
void	if_value (const std::string &expression, const std::shared_ptr< Path > &path, EAfterConditionPath afterConditionPath=EAfterConditionPath::c_End)
	Add a condition to the module.
void	if_false (const std::shared_ptr< Path > &path, EAfterConditionPath afterConditionPath=EAfterConditionPath::c_End)
	A simplified version to add a condition to the module.
void	if_true (const std::shared_ptr< Path > &path, EAfterConditionPath afterConditionPath=EAfterConditionPath::c_End)
	A simplified version to set the condition of the module.
bool	hasCondition () const
	Returns true if at least one condition was set for the module.
const ModuleCondition *	getCondition () const
	Return a pointer to the first condition (or nullptr, if none was set)
const std::vector< ModuleCondition > &	getAllConditions () const
	Return all set conditions for this module.
bool	evalCondition () const
	If at least one condition was set, it is evaluated and true returned if at least one condition returns true.
std::shared_ptr< Path >	getConditionPath () const
	Returns the path of the last true condition (if there is at least one, else reaturn a null pointer).
Module::EAfterConditionPath	getAfterConditionPath () const
	What to do after the conditional path is finished.
std::vector< std::shared_ptr< Path > >	getAllConditionPaths () const
	Return all condition paths currently set (no matter if the condition is true or not).
bool	hasProperties (unsigned int propertyFlags) const
	Returns true if all specified property flags are available in this module.
bool	hasUnsetForcedParams () const
	Returns true and prints error message if the module has unset parameters which the user has to set in the steering file.
const ModuleParamList &	getParamList () const
	Return module param list.
template<typename T >
ModuleParam< T > &	getParam (const std::string &name) const
	Returns a reference to a parameter.
bool	hasReturnValue () const
	Return true if this module has a valid return value set.
int	getReturnValue () const
	Return the return value set by this module.
std::shared_ptr< PathElement >	clone () const override
	Create an independent copy of this module.
std::shared_ptr< boost::python::list >	getParamInfoListPython () const
	Returns a python list of all parameters.

Static Public Member Functions
static void	exposePythonAPI ()
	Exposes methods of the Module class to Python.

Protected Member Functions
virtual void	def_initialize ()
	Wrappers to make the methods without "def_" prefix callable from Python.
virtual void	def_beginRun ()
	Wrapper method for the virtual function beginRun() that has the implementation to be used in a call from Python.
virtual void	def_event ()
	Wrapper method for the virtual function event() that has the implementation to be used in a call from Python.
virtual void	def_endRun ()
	This method can receive that the current run ends as a call from the Python side.
virtual void	def_terminate ()
	Wrapper method for the virtual function terminate() that has the implementation to be used in a call from Python.
void	setDescription (const std::string &description)
	Sets the description of the module.
void	setType (const std::string &type)
	Set the module type.
template<typename T >
void	addParam (const std::string &name, T &paramVariable, const std::string &description, const T &defaultValue)
	Adds a new parameter to the module.
template<typename T >
void	addParam (const std::string &name, T &paramVariable, const std::string &description)
	Adds a new enforced parameter to the module.
void	setReturnValue (int value)
	Sets the return value for this module as integer.
void	setReturnValue (bool value)
	Sets the return value for this module as bool.
void	setParamList (const ModuleParamList &params)
	Replace existing parameter list.

Private Member Functions
void	calculateMeans (double *mean, double *truncatedMean, double *truncatedMeanErr, const std::vector< double > &dedx) const
	Recalculate the dE/dx mean values after corrections.
std::list< ModulePtr >	getModules () const override
	no submodules, return empty list
std::string	getPathString () const override
	return the module name.
void	setParamPython (const std::string &name, const boost::python::object &pyObj)
	Implements a method for setting boost::python objects.
void	setParamPythonDict (const boost::python::dict &dictionary)
	Implements a method for reading the parameter values from a boost::python dictionary.

Private Attributes
bool	m_relative
	boolean to apply relative or absolute correction
bool	m_momCor
	boolean to apply momentum correction
bool	m_useDBMomCor
	boolean to apply momentum correction from DB
bool	m_scaleCor
	boolean to apply scale factor
bool	m_cosineCor
	boolean to apply cosine correction
bool	m_wireGain
	boolean to apply wire gains
bool	m_runGain
	boolean to apply run gains
bool	m_timeGain
	boolean to apply injection time gains
bool	m_twoDCell
	boolean to apply 2D correction
bool	m_oneDCell
	boolean to apply 1D correction
bool	m_cosineEdge
	boolean to apply cosine edge
bool	m_nonlADC
	boolean to apply non linear ADC
StoreArray< CDCDedxTrack >	m_cdcDedxTracks
	Store array: CDCDedxTrack.
StoreObjPtr< EventLevelTriggerTimeInfo >	m_TTDInfo
	Store Object Ptr: EventLevelTriggerTimeInfo.
DBObjPtr< CDCDedxScaleFactor >	m_DBScaleFactor
	Scale factor to make electrons ~1.
DBObjPtr< CDCDedxMomentumCor >	m_DBMomentumCor
	Momentum correction DB object.
DBObjPtr< CDCDedxWireGain >	m_DBWireGains
	Wire gain DB object.
DBObjPtr< CDCDedxRunGain >	m_DBRunGain
	Run gain DB object.
DBObjPtr< CDCDedxInjectionTime >	m_DBInjectTime
	time gain/reso DB object
DBObjPtr< CDCDedxCosineCor >	m_DBCosineCor
	Electron saturation correction DB object.
DBObjPtr< CDCDedx2DCell >	m_DB2DCell
	2D correction DB object
DBObjPtr< CDCDedx1DCell >	m_DB1DCell
	1D correction DB object
DBObjPtr< CDCDedxHadronCor >	m_DBHadronCor
	hadron saturation parameters
DBObjPtr< CDCDedxADCNonLinearity >	m_DBNonlADC
	hadron saturation non linearity
DBObjPtr< CDCDedxCosineEdge >	m_DBCosEdgeCor
	cosine edge calibration
std::vector< double >	m_hadronpars
	hadron saturation parameters
std::array< double, 56 >	m_lgainavg
	average calibration factor for the layer
double	m_removeLowest
	lower bound for truncated mean
double	m_removeHighest
	upper bound for truncated mean
std::string	m_name
	The name of the module, saved as a string (user-modifiable)
std::string	m_type
	The type of the module, saved as a string.
std::string	m_package
	Package this module is found in (may be empty).
std::string	m_description
	The description of the module.
unsigned int	m_propertyFlags
	The properties of the module as bitwise or (with |) of EModulePropFlags.
LogConfig	m_logConfig
	The log system configuration of the module.
ModuleParamList	m_moduleParamList
	List storing and managing all parameter of the module.
bool	m_hasReturnValue
	True, if the return value is set.
int	m_returnValue
	The return value.
std::vector< ModuleCondition >	m_conditions
	Module condition, only non-null if set.

Detailed Description

This module may be used to apply the corrections to dE/dx per the calibration constants.

The interface with the calibration database is currently under construction and will be included when ready. For now, placeholders are used so the structure may be developed.

Definition at line 52 of file CDCDedxCorrectionModule.h.

Member Typedef Documentation

EAfterConditionPath

typedef ModuleCondition::EAfterConditionPath EAfterConditionPath

inherited

Forward the EAfterConditionPath definition from the ModuleCondition.

Definition at line 88 of file Module.h.

Member Enumeration Documentation

EModulePropFlags

enum EModulePropFlags

inherited

Each module can be tagged with property flags, which indicate certain features of the module.

Enumerator
c_Input	This module is an input module (reads data).
c_Output	This module is an output module (writes data).
c_ParallelProcessingCertified	This module can be run in parallel processing mode safely (All I/O must be done through the data store, in particular, the module must not write any files.)
c_HistogramManager	This module is used to manage histograms accumulated by other modules.
c_InternalSerializer	This module is an internal serializer/deserializer for parallel processing.
c_TerminateInAllProcesses	When using parallel processing, call this module's terminate() function in all processes(). This will also ensure that there is exactly one process (single-core if no parallel modules found) or at least one input, one main and one output process.
c_DontCollectStatistics	No statistics is collected for this module.

Definition at line 77 of file Module.h.

                          {
      c_Input                       = 1,  
      c_Output                      = 2,  
      c_ParallelProcessingCertified = 4,  
      c_HistogramManager            = 8, 
      c_InternalSerializer          = 16,  
      c_TerminateInAllProcesses     = 32,  
      c_DontCollectStatistics       = 64,  
    };

Constructor & Destructor Documentation

CDCDedxCorrectionModule()

CDCDedxCorrectionModule

(

)

Constructor.

Definition at line 17 of file CDCDedxCorrectionModule.cc.

                                                 : Module()
{
 
  setDescription("Apply hit level corrections to the dE/dx measurements.");
  addParam("relativeCorrections", m_relative, "If true, apply corrections relative", true);
  addParam("momentumCor", m_momCor, "Boolean to apply momentum correction", false);
  addParam("momentumCorFromDB", m_useDBMomCor, "Boolean to apply momentum correction from DB", false);
  addParam("scaleCor", m_scaleCor, "Boolean to apply scale correction", false);
  addParam("cosineCor", m_cosineCor, "Boolean to apply cosine correction", false);
  addParam("wireGain", m_wireGain, "Boolean to apply wire gains", false);
  addParam("runGain", m_runGain, "Boolean to apply run gain", false);
  addParam("timeGain", m_timeGain, "Boolean to apply time gain", false);
  addParam("twoDCell", m_twoDCell, "Boolean to apply 2D correction", false);
  addParam("oneDCell", m_oneDCell, "Boolean to apply 1D correction", false);
  addParam("cosineEdge", m_cosineEdge, "Boolean to apply cosine edge correction", true);
  addParam("nonlADC", m_nonlADC, "Boolean to apply non-linear adc correction", true);
  addParam("removeLowest", m_removeLowest, "portion of events with low dE/dx", double(0.05));
  addParam("removeHighest", m_removeHighest, "portion of events with high dE/dx", double(0.25));
}

~CDCDedxCorrectionModule()

~CDCDedxCorrectionModule ( )

virtual

Destructor.

Definition at line 37 of file CDCDedxCorrectionModule.cc.

{ }

Member Function Documentation

beginRun()

virtual void beginRun ( void  )

inlinevirtualinherited

Called when entering a new run.

Called at the beginning of each run, the method gives you the chance to change run dependent constants like alignment parameters, etc.

This method can be implemented by subclasses.

Reimplemented in ARICHBackgroundModule, BeamabortModule, BgoModule, CaveModule, ClawModule, CLAWSModule, DosiModule, FANGSModule, He3tubeModule, MicrotpcModule, Ph1bpipeModule, Ph1sustrModule, PindiodeModule, PlumeModule, QcsmonitorModule, SrsensorModule, GetEventFromSocketModule, CalibrationCollectorModule, EventsOfDoomBusterModule, CosmicsAlignmentValidationModule, EnergyBiasCorrectionModule, ChargedPidMVAModule, ChargedPidMVAMulticlassModule, CurlTaggerModule, LowEnergyPi0IdentificationExpertModule, LowEnergyPi0VetoExpertModule, ParticleVertexFitterModule, PhotonEfficiencySystematicsModule, TagVertexModule, TreeFitterModule, arichBtestModule, ARICHDigitizerModule, ARICHDQMModule, ARICHRateCalModule, ARICHReconstructorModule, B2BIIMCParticlesMonitorModule, B2BIIConvertBeamParamsModule, B2BIIConvertMdstModule, B2BIIFixMdstModule, B2BIIMdstInputModule, BelleMCOutputModule, BeamBkgGeneratorModule, BeamBkgHitRateMonitorModule, BeamBkgMixerModule, BeamBkgTagSetterModule, BGOverlayInputModule, AnalysisPhase1StudyModule, NtuplePhase1_v6Module, ReprocessorModule, BeamabortStudyModule, BeamDigitizerModule, BgoDigitizerModule, BgoStudyModule, ClawDigitizerModule, ClawStudyModule, ClawsDigitizerModule, ClawsStudyModule, CsiDigitizer_v2Module, CsIDigitizerModule, CsiModule, CsiStudy_v2Module, CsIStudyModule, DosiDigitizerModule, DosiStudyModule, FANGSDigitizerModule, FANGSStudyModule, He3DigitizerModule, He3tubeStudyModule, MicrotpcStudyModule, TpcDigitizerModule, PinDigitizerModule, PindiodeStudyModule, PlumeDigitizerModule, QcsmonitorDigitizerModule, QcsmonitorStudyModule, CDCCosmicAnalysisModule, CDCCRTestModule, cdcDQM7Module, CDCDQMModule, CDCPackerModule, CDCRecoTrackFilterModule, CDCUnpackerModule, DAQPerfModule, RxSocketModule, TxSocketModule, DqmHistoManagerModule, MonitorDataModule, TrackAnaModule, Ds2SampleModule, ReceiveEventModule, HLTDQM2ZMQModule, ElapsedTimeModule, DeSerializerPXDModule, GenRawSendModule, SerializerModule, CertifyParallelModule, Ds2RawModule, Ds2RbufModule, EvReductionModule, FastRbuf2DsModule, Raw2DsModule, RawInputModule, Rbuf2DsModule, Rbuf2RbufModule, Ds2RawFileModule, PartialSeqRootReaderModule, SeqRootMergerModule, StorageDeserializerModule, StorageSerializerModule, IPDQMModule, PhysicsObjectsDQMModule, PhysicsObjectsMiraBelleBhabhaModule, PhysicsObjectsMiraBelleDst2Module, PhysicsObjectsMiraBelleDstModule, PhysicsObjectsMiraBelleHadronModule, PhysicsObjectsMiraBelleModule, ECLBackgroundModule, ECLChargedPIDModule, ECLChargedPIDDataAnalysisModule, ECLChargedPIDDataAnalysisValidationModule, ECLChargedPIDMVAModule, ECLClusterPSDModule, ECLCovarianceMatrixModule, ECLCRFinderModule, ECLDataAnalysisModule, ECLDigitCalibratorModule, ECLDigitizerModule, ECLDigitizerPureCsIModule, EclDisplayModule, ECLDQMModule, ECLDQMConnectedRegionsModule, ECLDQMEXTENDEDModule, ECLDQMOutOfTimeDigitsModule, ECLFinalizerModule, ECLHitDebugModule, ECLLocalMaximumFinderModule, ECLLocalRunCalibratorModule, ECLLOMModule, ECLPackerModule, ECLShowerCorrectorModule, ECLShowerShapeModule, ECLSplitterN1Module, ECLSplitterN2Module, ECLUnpackerModule, ECLWaveformFitModule, HistoModule, SubEventModule, SwitchDataStoreModule, EventInfoPrinterModule, EventLimiterModule, IoVDependentConditionModule, ProgressModule, RandomBarrierModule, GearboxModule, HistoManagerModule, StatisticsSummaryModule, SeqRootInputModule, SeqRootOutputModule, RxModule, TxModule, EvtGenDecayModule, EvtGenInputModule, OverrideGenerationFlagsModule, KKGenInputModule, CreateFieldMapModule, ExportGeometryModule, SoftwareTriggerModule, SoftwareTriggerHLTDQMModule, StatisticsTimingHLTDQMModule, BKLMAnaModule, BKLMDigitAnalyzerModule, BKLMSimHistogrammerModule, BKLMTrackingModule, EKLMDataCheckerModule, KLMClusterAnaModule, KLMClusterEfficiencyModule, KLMClustersReconstructorModule, KLMDigitizerModule, KLMDigitTimeShifterModule, KLMDQMModule, KLMDQM2Module, KLMPackerModule, KLMReconstructorModule, KLMScintillatorSimulatorModule, KLMUnpackerModule, MVAExpertModule, MVAMultipleExpertsModule, MVAPrototypeModule, AWESOMEBasicModule, PXDBackgroundModule, PXDRawDQMChipsModule, PXDClustersFromTracksModule, PXDPerformanceModule, PXDClusterizerModule, Convert2RawDetModule, CDCDedxDQMModule, CDCDedxValidationModule, EventT0DQMModule, EventT0ValidationModule, DataWriterModule, ECLExpertModule, KLMExpertModule, KlongValidationModule, KLMMuonIDDNNExpertModule, FullSimModule, MaterialScanModule, SVDBackgroundModule, SVDClusterCalibrationsMonitorModule, SVDHotStripFinderModule, SVDLatencyCalibrationModule, SVDLocalCalibrationsCheckModule, SVDLocalCalibrationsMonitorModule, SVDPositionErrorScaleFactorImporterModule, SVDTimeCalibrationsMonitorModule, SVDDQMHitTimeModule, svdDumpModule, SVDPackerModule, SVDB4CommissioningPlotsModule, SVDClusterEvaluationModule, SVDClusterEvaluationTrueInfoModule, SVDClusterFilterModule, SVDMaxStripTTreeModule, SVDOccupancyAnalysisModule, SVDPerformanceModule, SVDPerformanceTTreeModule, SVDShaperDigitsFromTracksModule, SVDClusterizerModule, SVDCoGTimeEstimatorModule, SVDDataFormatCheckModule, SVDMissingAPVsClusterCreatorModule, SVDRecoDigitCreatorModule, SVD3SamplesEmulatorModule, SVDDigitizerModule, SVDEventInfoSetterModule, SVDTriggerQualityGeneratorModule, SVDSpacePointCreatorModule, SVDTimeGroupingModule, SVDUnpackerModule, TOPBackgroundModule, TOPBunchFinderModule, TOPChannelMaskerModule, TOPChannelT0MCModule, TOPDigitizerModule, TOPTriggerDigitizerModule, TOPDoublePulseGeneratorModule, TOPDQMModule, TOPGainEfficiencyCalculatorModule, TOPLaserHitSelectorModule, TOPInterimFENtupleModule, TOPLaserCalibratorModule, TOPMCTrackMakerModule, TOPModuleT0CalibratorModule, TOPNtupleModule, TOPPackerModule, TOPRawDigitConverterModule, TOPTBCComparatorModule, TOPTimeBaseCalibratorModule, TOPTimeRecalibratorModule, TOPUnpackerModule, TOPWaveformFeatureExtractorModule, TOPXTalkChargeShareSetterModule, DQMHistoModuleBase, SVDEventT0EstimatorModule, ExtModule, FlipQualityModule, BeamSpotMonitorModule, KinkFinderModule, MCV0MatcherModule, MCTrackCandClassifierModule, MuidModule, PXDROIFinderModule, SVDROIFinderAnalysisModule, SVDROIFinderModule, SPTCmomentumSeedRetrieverModule, SPTCvirtualIPRemoverModule, TrackCreatorModule, TrackFinderMCTruthRecoTracksModule, EffPlotsModule, HitXPModule, TrackingPerformanceEvaluationModule, V0findingPerformanceEvaluationModule, TrackQETrainingDataCollectorModule, TrackQualityEstimatorMVAModule, SecMapTrainerBaseModule, SecMapTrainerVXDTFModule, TrackFinderVXDAnalizerModule, VXDSimpleClusterizerModule, QualityEstimatorVXDModule, VXDQETrainingDataCollectorModule, VXDQualityEstimatorMVAModule, SectorMapBootstrapModule, SegmentNetworkProducerModule, TrackFinderVXDBasicPathFinderModule, TrackFinderVXDCellOMatModule, VXDTFTrainingDataCollectorModule, FindletModule< AFindlet >, FindletModule< HitBasedT0Extractor >, FindletModule< CKFToSVDSeedFindlet >, FindletModule< CKFToSVDFindlet >, FindletModule< CosmicsTrackMergerFindlet >, FindletModule< DATCONFPGAFindlet >, FindletModule< MCVXDCDCTrackMergerFindlet >, FindletModule< vxdHoughTracking::SVDHoughTracking >, FindletModule< CKFToCDCFindlet >, FindletModule< CKFToCDCFromEclFindlet >, FindletModule< CKFToPXDFindlet >, FindletModule< AsicBackgroundLibraryCreator >, FindletModule< CDCTrackingEventLevelMdstInfoFillerFromHitsFindlet >, FindletModule< CDCTrackingEventLevelMdstInfoFillerFromSegmentsFindlet >, FindletModule< AxialSegmentPairCreator >, FindletModule< AxialStraightTrackFinder >, FindletModule< AxialTrackCreatorMCTruth >, FindletModule< AxialTrackCreatorSegmentHough >, FindletModule< AxialTrackFinderHough >, FindletModule< AxialTrackFinderLegendre >, FindletModule< ClusterBackgroundDetector >, FindletModule< ClusterPreparer >, FindletModule< ClusterRefiner< BridgingWireHitRelationFilter > >, FindletModule< FacetCreator >, FindletModule< HitReclaimer >, FindletModule< MonopoleAxialTrackFinderLegendre >, FindletModule< MonopoleStereoHitFinder >, FindletModule< MonopoleStereoHitFinderQuadratic >, FindletModule< SegmentCreatorFacetAutomaton >, FindletModule< SegmentCreatorMCTruth >, FindletModule< SegmentFinderFacetAutomaton >, FindletModule< SegmentFitter >, FindletModule< SegmentLinker >, FindletModule< SegmentOrienter >, FindletModule< SegmentPairCreator >, FindletModule< SegmentRejecter >, FindletModule< SegmentTrackCombiner >, FindletModule< SegmentTripleCreator >, FindletModule< StereoHitFinder >, FindletModule< SuperClusterCreator >, FindletModule< TrackCombiner >, FindletModule< TrackCreatorSegmentPairAutomaton >, FindletModule< TrackCreatorSegmentTripleAutomaton >, FindletModule< TrackCreatorSingleSegments >, FindletModule< TrackExporter >, FindletModule< TrackFinderAutomaton >, FindletModule< TrackFinderCosmics >, FindletModule< TrackFinder >, FindletModule< TrackFinderSegmentPairAutomaton >, FindletModule< TrackFinderSegmentTripleAutomaton >, FindletModule< TrackFlightTimeAdjuster >, FindletModule< TrackLinker >, FindletModule< TrackOrienter >, FindletModule< TrackQualityAsserter >, FindletModule< TrackQualityEstimator >, FindletModule< TrackRejecter >, FindletModule< WireHitBackgroundDetector >, FindletModule< WireHitCreator >, FindletModule< WireHitPreparer >, CDCTriggerNeuroDQMModule, CDCTriggerNeuroDQMOnlineModule, CDCTriggerNDFinderModule, CDCTriggerTSFModule, TRGCDCModule, TRGCDCETFUnpackerModule, TRGCDCT2DDQMModule, TRGCDCT3DConverterModule, TRGCDCT3DDQMModule, TRGCDCT3DUnpackerModule, TRGCDCTSFDQMModule, TRGCDCTSFUnpackerModule, TRGCDCTSStreamModule, CDCTriggerUnpackerModule, MCMatcherTRGECLModule, TRGECLFAMModule, TRGECLModule, TRGECLBGTCHitModule, TRGECLDQMModule, TRGECLEventTimingDQMModule, TRGECLQAMModule, TRGECLRawdataAnalysisModule, TRGECLTimingCalModule, TRGECLUnpackerModule, TRGGDLModule, TRGEFFDQMModule, TRGGDLDQMModule, TRGGDLDSTModule, TRGGDLSummaryModule, TRGGDLUnpackerModule, TRGGRLMatchModule, TRGGRLModule, TRGGRLProjectsModule, TRGGRLDQMModule, TRGGRLUnpackerModule, KLMTriggerModule, TRGTOPDQMModule, TRGTOPTRD2TTSConverterModule, TRGTOPUnpackerModule, TRGTOPUnpackerWaveformModule, TRGTOPWaveformPlotterModule, TRGRAWDATAModule, VXDMisalignmentModule, DQMHistAnalysisARICHModule, DQMHistAnalysisCDCDedxModule, DQMHistAnalysisCDCEpicsModule, DQMHistAnalysisCDCMonObjModule, DQMHistAnalysisDAQMonObjModule, DQMHistAnalysisECLModule, DQMHistAnalysisECLConnectedRegionsModule, DQMHistAnalysisECLShapersModule, DQMHistAnalysisECLSummaryModule, DQMHistAnalysisEpicsExampleModule, DQMHistAnalysisEventT0EfficiencyModule, DQMHistAnalysisEventT0TriggerJitterModule, DQMHistAnalysisExampleModule, DQMHistAnalysisExampleFlagsModule, DQMHistAnalysisHLTModule, DQMHistAnalysisInput2Module, DQMHistAnalysisInputPVSrvModule, DQMHistAnalysisInputRootFileModule, DQMHistAnalysisInputTestModule, DQMHistAnalysisKLMModule, DQMHistAnalysisKLM2Module, DQMHistAnalysisMiraBelleModule, DQMHistAnalysisOutputMonObjModule, DQMHistAnalysisOutputRelayMsgModule, DQMHistAnalysisPeakModule, DQMHistAnalysisPXDERModule, DQMHistAnalysisPXDFitsModule, DQMHistAnalysisSVDClustersOnTrackModule, DQMHistAnalysisSVDDoseModule, DQMHistAnalysisSVDEfficiencyModule, DQMHistAnalysisSVDGeneralModule, DQMHistAnalysisSVDOccupancyModule, DQMHistAnalysisSVDOnMiraBelleModule, DQMHistAnalysisSVDUnpackerModule, DQMHistAnalysisTOPModule, DQMHistAnalysisTrackingAbortModule, DQMHistAnalysisTrackingHLTModule, DQMHistAnalysisTRGECLModule, DQMHistAutoCanvasModule, DQMHistComparitorModule, DQMHistDeltaHistoModule, DQMHistReferenceModule, DQMHistSnapshotsModule, DAQMonitorModule, DelayDQMModule, V0ObjectsDQMModule, ECLDQMInjectionModule, PyModule, PXDBgTupleProducerModule, PXDMCBgTupleProducerModule, PXDDAQDQMModule, PXDDQMClustersModule, PXDDQMCorrModule, PXDDQMEfficiencyModule, PXDDQMEfficiencySelftrackModule, PXDDQMExpressRecoModule, PXDGatedDHCDQMModule, PXDGatedModeDQMModule, PXDInjectionDQMModule, PXDRawDQMCorrModule, PXDRawDQMModule, PXDROIDQMModule, PXDTrackClusterDQMModule, PXDDigitizerModule, PXDPackerModule, PXDUnpackerModule, TTDDQMModule, DetectorOccupanciesDQMModule, SVDDQMClustersOnTrackModule, SVDDQMDoseModule, SVDDQMExpressRecoModule, SVDDQMInjectionModule, SVDUnpackerDQMModule, PXDclusterFilterModule, PXDdigiFilterModule, PXDROIFinderAnalysisModule, TrackingAbortDQMModule, VXDDQMExpressRecoModule, vxdDigitMaskingModule, DQMHistAnalysisDeltaEpicsMonObjExampleModule, DQMHistAnalysisDeltaTestModule, DQMHistAnalysisEpicsOutputModule, DQMHistAnalysisPhysicsModule, DQMHistAnalysisPXDChargeModule, DQMHistAnalysisPXDCMModule, DQMHistAnalysisPXDDAQModule, DQMHistAnalysisPXDEffModule, DQMHistAnalysisPXDInjectionModule, DQMHistAnalysisPXDReductionModule, DQMHistAnalysisPXDTrackChargeModule, DQMHistAnalysisRooFitExampleModule, DQMHistAnalysisRunNrModule, DQMHistAnalysisTRGModule, DQMHistInjectionModule, and DQMHistOutputToEPICSModule.

Definition at line 147 of file Module.h.

{};

calculateMeans()

void calculateMeans ( double *  mean, double *  truncatedMean, double *  truncatedMeanErr, const std::vector< double > &  dedx  ) const

private

Recalculate the dE/dx mean values after corrections.

Definition at line 390 of file CDCDedxCorrectionModule.cc.

{
  // Calculate the truncated average by skipping the lowest & highest
  // events in the array of dE/dx values
  std::vector<double> sortedDedx = dedx;
  std::sort(sortedDedx.begin(), sortedDedx.end());
  sortedDedx.erase(std::remove(sortedDedx.begin(), sortedDedx.end(), 0), sortedDedx.end());
  sortedDedx.shrink_to_fit();
 
  double truncatedMeanTmp = 0.0;
  double meanTmp = 0.0;
  double sumOfSquares = 0.0;
  int numValuesTrunc = 0;
  const int numDedx = sortedDedx.size();
 
  // add a factor of 0.51 here to make sure we are rounding appropriately...
  const int lowEdgeTrunc = int(numDedx * m_removeLowest + 0.51);
  const int highEdgeTrunc = int(numDedx * (1 - m_removeHighest) + 0.51);
  for (int i = 0; i < numDedx; i++) {
    meanTmp += sortedDedx[i];
    if (i >= lowEdgeTrunc and i < highEdgeTrunc) {
      truncatedMeanTmp += sortedDedx[i];
      sumOfSquares += sortedDedx[i] * sortedDedx[i];
      numValuesTrunc++;
    }
  }
 
  if (numDedx != 0) {
    meanTmp /= numDedx;
  }
  if (numValuesTrunc != 0) {
    truncatedMeanTmp /= numValuesTrunc;
  } else {
    truncatedMeanTmp = meanTmp;
  }
 
  *mean = meanTmp;
  *truncatedMean = truncatedMeanTmp;
 
  if (numValuesTrunc > 1) {
    *truncatedMeanErr = sqrt(sumOfSquares / double(numValuesTrunc) - truncatedMeanTmp * truncatedMeanTmp) / double(
                          numValuesTrunc - 1);
  } else {
    *truncatedMeanErr = 0;
  }
}

clone()

std::shared_ptr< PathElement > clone ( ) const

overridevirtualinherited

Create an independent copy of this module.

Note that parameters are shared, so changing them on a cloned module will also affect the original module.

Implements PathElement.

Definition at line 179 of file Module.cc.

{
  ModulePtr newModule = ModuleManager::Instance().registerModule(getType());
  newModule->m_moduleParamList.setParameters(getParamList());
  newModule->setName(getName());
  newModule->m_package = m_package;
  newModule->m_propertyFlags = m_propertyFlags;
  newModule->m_logConfig = m_logConfig;
  newModule->m_conditions = m_conditions;
 
  return newModule;
}

CosineCorrection()

void CosineCorrection	(	double	costheta,
		double &	dedx
	)		const

Perform the cosine correction.

Definition at line 246 of file CDCDedxCorrectionModule.cc.

{
  double coscor = m_DBCosineCor->getMean(costh);
  if (coscor != 0) dedx = dedx / coscor;
  else dedx = 0;
}

CosineEdgeCorrection()

void CosineEdgeCorrection	(	double	costh,
		double &	dedx
	)		const

Perform the cosine edge correction.

Definition at line 253 of file CDCDedxCorrectionModule.cc.

{
 
  double cosedgecor = m_DBCosEdgeCor->getMean(costh);
  if (cosedgecor != 0) dedx = dedx / cosedgecor;
  else dedx = 0;
}

D2I()

double D2I	(	const double	cosTheta,
		const double	D
	)		const

Saturation correction: convert the measured ionization (D) to actual ionization (I)

Definition at line 329 of file CDCDedxCorrectionModule.cc.

{
  double absCosTheta   = fabs(cosTheta);
  double projection    = pow(absCosTheta, m_hadronpars[3]) + m_hadronpars[2];
  if (projection == 0) {
    B2WARNING("Something wrong with dE/dx hadron constants!");
    return D;
  }
 
  double chargeDensity = D / projection;
  double numerator     = 1 + m_hadronpars[0] * chargeDensity;
  double denominator   = 1 + m_hadronpars[1] * chargeDensity;
 
  if (denominator == 0) {
    B2WARNING("Something wrong with dE/dx hadron constants!");
    return D;
  }
 
  double I = D * m_hadronpars[4] * numerator / denominator;
  return I;
}

def_beginRun()

virtual void def_beginRun ( )

inlineprotectedvirtualinherited

Wrapper method for the virtual function beginRun() that has the implementation to be used in a call from Python.

Reimplemented in PyModule.

Definition at line 426 of file Module.h.

{ beginRun(); }

def_endRun()

virtual void def_endRun ( )

inlineprotectedvirtualinherited

This method can receive that the current run ends as a call from the Python side.

For regular C++-Modules that forwards the call to the regular endRun() method.

Reimplemented in PyModule.

Definition at line 439 of file Module.h.

{ endRun(); }

def_event()

virtual void def_event ( )

inlineprotectedvirtualinherited

Wrapper method for the virtual function event() that has the implementation to be used in a call from Python.

Reimplemented in PyModule.

Definition at line 432 of file Module.h.

{ event(); }

def_initialize()

virtual void def_initialize ( )

inlineprotectedvirtualinherited

Wrappers to make the methods without "def_" prefix callable from Python.

Overridden in PyModule. Wrapper method for the virtual function initialize() that has the implementation to be used in a call from Python.

Reimplemented in PyModule.

Definition at line 420 of file Module.h.

{ initialize(); }

def_terminate()

virtual void def_terminate ( )

inlineprotectedvirtualinherited

Wrapper method for the virtual function terminate() that has the implementation to be used in a call from Python.

Reimplemented in PyModule.

Definition at line 445 of file Module.h.

{ terminate(); }

endRun()

virtual void endRun ( void  )

inlinevirtualinherited

This method is called if the current run ends.

Use this method to store information, which should be aggregated over one run.

This method can be implemented by subclasses.

Reimplemented in BeamabortModule, BgoModule, CaveModule, ClawModule, CLAWSModule, DosiModule, FANGSModule, He3tubeModule, MicrotpcModule, Ph1bpipeModule, Ph1sustrModule, PindiodeModule, PlumeModule, QcsmonitorModule, SrsensorModule, GetEventFromSocketModule, CalibrationCollectorModule, AlignDQMModule, CosmicsAlignmentValidationModule, CurlTaggerModule, LowEnergyPi0IdentificationExpertModule, LowEnergyPi0VetoExpertModule, arichBtestModule, ARICHDQMModule, B2BIIMCParticlesMonitorModule, B2BIIConvertMdstModule, B2BIIMdstInputModule, BelleMCOutputModule, BeamBkgGeneratorModule, BeamBkgHitRateMonitorModule, BeamBkgMixerModule, BeamBkgTagSetterModule, BGOverlayInputModule, AnalysisPhase1StudyModule, NtuplePhase1_v6Module, ReprocessorModule, BeamabortStudyModule, BeamDigitizerModule, BgoDigitizerModule, BgoStudyModule, ClawDigitizerModule, ClawStudyModule, ClawsDigitizerModule, ClawsStudyModule, CsiDigitizer_v2Module, CsIDigitizerModule, CsiModule, CsiStudy_v2Module, CsIStudyModule, DosiDigitizerModule, DosiStudyModule, FANGSDigitizerModule, FANGSStudyModule, He3DigitizerModule, He3tubeStudyModule, MicrotpcStudyModule, TpcDigitizerModule, TPCStudyModule, PinDigitizerModule, PindiodeStudyModule, PlumeDigitizerModule, QcsmonitorDigitizerModule, QcsmonitorStudyModule, CDCCosmicAnalysisModule, CDCCRTestModule, cdcDQM7Module, CDCDQMModule, CDCPackerModule, CDCRecoTrackFilterModule, CDCUnpackerModule, DAQPerfModule, RxSocketModule, TxSocketModule, DqmHistoManagerModule, MonitorDataModule, TrackAnaModule, Ds2SampleModule, ReceiveEventModule, HLTDQM2ZMQModule, HLTDs2ZMQModule, ElapsedTimeModule, DeSerializerPXDModule, GenRawSendModule, Root2RawModule, SerializerModule, CertifyParallelModule, Ds2RawModule, Ds2RbufModule, EvReductionModule, FastRbuf2DsModule, Raw2DsModule, RawInputModule, Rbuf2DsModule, Rbuf2RbufModule, Ds2RawFileModule, PartialSeqRootReaderModule, SeqRootMergerModule, StorageDeserializerModule, StorageRootOutputModule, StorageSerializerModule, PhysicsObjectsDQMModule, PhysicsObjectsMiraBelleBhabhaModule, PhysicsObjectsMiraBelleDst2Module, PhysicsObjectsMiraBelleDstModule, PhysicsObjectsMiraBelleHadronModule, PhysicsObjectsMiraBelleModule, ECLBackgroundModule, ECLChargedPIDModule, ECLChargedPIDDataAnalysisModule, ECLChargedPIDDataAnalysisValidationModule, ECLClusterPSDModule, ECLCovarianceMatrixModule, ECLCRFinderModule, ECLDataAnalysisModule, ECLDigitCalibratorModule, ECLDigitizerModule, ECLDigitizerPureCsIModule, EclDisplayModule, ECLDQMModule, ECLDQMEXTENDEDModule, ECLFinalizerModule, ECLHitDebugModule, ECLLocalMaximumFinderModule, ECLLocalRunCalibratorModule, ECLLOMModule, ECLPackerModule, ECLShowerCorrectorModule, ECLShowerShapeModule, ECLSplitterN1Module, ECLSplitterN2Module, ECLUnpackerModule, ECLWaveformFitModule, HistoModule, SubEventModule, SwitchDataStoreModule, EventInfoPrinterModule, RandomBarrierModule, HistoManagerModule, StatisticsSummaryModule, SeqRootInputModule, SeqRootOutputModule, RxModule, TxModule, ZMQTxInputModule, ZMQTxWorkerModule, EvtGenDecayModule, OverrideGenerationFlagsModule, BKLMAnaModule, BKLMDigitAnalyzerModule, BKLMSimHistogrammerModule, BKLMTrackingModule, EKLMDataCheckerModule, KLMClusterEfficiencyModule, KLMClustersReconstructorModule, KLMDigitizerModule, KLMDQMModule, KLMDQM2Module, KLMPackerModule, KLMReconstructorModule, KLMScintillatorSimulatorModule, KLMUnpackerModule, AWESOMEBasicModule, PXDBackgroundModule, PXDClustersFromTracksModule, PXDPerformanceModule, Convert2RawDetModule, PrintDataModule, PrintEventRateModule, Root2BinaryModule, CDCDedxDQMModule, CDCDedxValidationModule, EventT0ValidationModule, DataWriterModule, KlongValidationModule, KLMMuonIDDNNExpertModule, FullSimModule, SVDBackgroundModule, SVDClusterCalibrationsMonitorModule, SVDHotStripFinderModule, SVDLatencyCalibrationModule, SVDLocalCalibrationsMonitorModule, SVDPositionErrorScaleFactorImporterModule, SVDTimeCalibrationsMonitorModule, svdDumpModule, SVDPackerModule, SVDB4CommissioningPlotsModule, SVDClusterEvaluationModule, SVDClusterEvaluationTrueInfoModule, SVDClusterFilterModule, SVDOccupancyAnalysisModule, SVDPerformanceModule, SVDShaperDigitsFromTracksModule, SVDClusterizerModule, SVDCoGTimeEstimatorModule, SVDDataFormatCheckModule, SVDRecoDigitCreatorModule, SVD3SamplesEmulatorModule, SVDTriggerQualityGeneratorModule, SVDUnpackerModule, TOPBackgroundModule, TOPChannelT0MCModule, TOPTriggerDigitizerModule, TOPDoublePulseGeneratorModule, TOPGainEfficiencyCalculatorModule, TOPLaserHitSelectorModule, TOPInterimFENtupleModule, TOPLaserCalibratorModule, TOPMCTrackMakerModule, TOPNtupleModule, TOPPackerModule, TOPRawDigitConverterModule, TOPTBCComparatorModule, TOPTimeBaseCalibratorModule, TOPUnpackerModule, TOPWaveformFeatureExtractorModule, TOPWaveformQualityPlotterModule, TOPXTalkChargeShareSetterModule, ExtModule, GenfitVisModule, MCV0MatcherModule, MCTrackCandClassifierModule, MuidModule, MCSlowPionPXDROICreatorModule, PXDROIFinderModule, SVDROIDQMModule, SVDROIFinderAnalysisModule, SVDROIFinderModule, RT2SPTCConverterModule, SPTCmomentumSeedRetrieverModule, SPTCvirtualIPRemoverModule, TrackFinderMCTruthRecoTracksModule, EffPlotsModule, HitXPModule, TrackingPerformanceEvaluationModule, V0findingPerformanceEvaluationModule, SecMapTrainerBaseModule, SecMapTrainerVXDTFModule, TrackFinderVXDAnalizerModule, VXDSimpleClusterizerModule, NoKickCutsEvalModule, SectorMapBootstrapModule, VXDTFTrainingDataCollectorModule, FindletModule< AFindlet >, FindletModule< HitBasedT0Extractor >, FindletModule< CKFToSVDSeedFindlet >, FindletModule< CKFToSVDFindlet >, FindletModule< CosmicsTrackMergerFindlet >, FindletModule< DATCONFPGAFindlet >, FindletModule< MCVXDCDCTrackMergerFindlet >, FindletModule< vxdHoughTracking::SVDHoughTracking >, FindletModule< CKFToCDCFindlet >, FindletModule< CKFToCDCFromEclFindlet >, FindletModule< CKFToPXDFindlet >, FindletModule< AsicBackgroundLibraryCreator >, FindletModule< CDCTrackingEventLevelMdstInfoFillerFromHitsFindlet >, FindletModule< CDCTrackingEventLevelMdstInfoFillerFromSegmentsFindlet >, FindletModule< AxialSegmentPairCreator >, FindletModule< AxialStraightTrackFinder >, FindletModule< AxialTrackCreatorMCTruth >, FindletModule< AxialTrackCreatorSegmentHough >, FindletModule< AxialTrackFinderHough >, FindletModule< AxialTrackFinderLegendre >, FindletModule< ClusterBackgroundDetector >, FindletModule< ClusterPreparer >, FindletModule< ClusterRefiner< BridgingWireHitRelationFilter > >, FindletModule< FacetCreator >, FindletModule< HitReclaimer >, FindletModule< MonopoleAxialTrackFinderLegendre >, FindletModule< MonopoleStereoHitFinder >, FindletModule< MonopoleStereoHitFinderQuadratic >, FindletModule< SegmentCreatorFacetAutomaton >, FindletModule< SegmentCreatorMCTruth >, FindletModule< SegmentFinderFacetAutomaton >, FindletModule< SegmentFitter >, FindletModule< SegmentLinker >, FindletModule< SegmentOrienter >, FindletModule< SegmentPairCreator >, FindletModule< SegmentRejecter >, FindletModule< SegmentTrackCombiner >, FindletModule< SegmentTripleCreator >, FindletModule< StereoHitFinder >, FindletModule< SuperClusterCreator >, FindletModule< TrackCombiner >, FindletModule< TrackCreatorSegmentPairAutomaton >, FindletModule< TrackCreatorSegmentTripleAutomaton >, FindletModule< TrackCreatorSingleSegments >, FindletModule< TrackExporter >, FindletModule< TrackFinderAutomaton >, FindletModule< TrackFinderCosmics >, FindletModule< TrackFinder >, FindletModule< TrackFinderSegmentPairAutomaton >, FindletModule< TrackFinderSegmentTripleAutomaton >, FindletModule< TrackFlightTimeAdjuster >, FindletModule< TrackLinker >, FindletModule< TrackOrienter >, FindletModule< TrackQualityAsserter >, FindletModule< TrackQualityEstimator >, FindletModule< TrackRejecter >, FindletModule< WireHitBackgroundDetector >, FindletModule< WireHitCreator >, FindletModule< WireHitPreparer >, CDCTriggerNeuroDQMModule, CDCTriggerNeuroDQMOnlineModule, CDCTriggerNDFinderModule, TRGCDCModule, TRGCDCETFUnpackerModule, TRGCDCT2DDQMModule, TRGCDCT3DConverterModule, TRGCDCT3DDQMModule, TRGCDCT3DUnpackerModule, TRGCDCTSFDQMModule, TRGCDCTSFUnpackerModule, TRGCDCTSStreamModule, MCMatcherTRGECLModule, TRGECLFAMModule, TRGECLModule, TRGECLBGTCHitModule, TRGECLDQMModule, TRGECLQAMModule, TRGECLRawdataAnalysisModule, TRGECLTimingCalModule, TRGECLUnpackerModule, TRGGDLModule, TRGEFFDQMModule, TRGGDLDQMModule, TRGGDLDSTModule, TRGGDLSummaryModule, TRGGDLUnpackerModule, TRGGRLMatchModule, TRGGRLModule, TRGGRLProjectsModule, TRGGRLDQMModule, TRGGRLUnpackerModule, KLMTriggerModule, TRGTOPDQMModule, TRGTOPTRD2TTSConverterModule, TRGTOPUnpackerModule, TRGTOPUnpackerWaveformModule, TRGTOPWaveformPlotterModule, TRGRAWDATAModule, DQMHistAnalysisARICHModule, DQMHistAnalysisARICHMonObjModule, DQMHistAnalysisCDCDedxModule, DQMHistAnalysisCDCEpicsModule, DQMHistAnalysisCDCMonObjModule, DQMHistAnalysisDAQMonObjModule, DQMHistAnalysisECLModule, DQMHistAnalysisECLConnectedRegionsModule, DQMHistAnalysisECLOutOfTimeDigitsModule, DQMHistAnalysisECLShapersModule, DQMHistAnalysisECLSummaryModule, DQMHistAnalysisEpicsExampleModule, DQMHistAnalysisExampleModule, DQMHistAnalysisExampleFlagsModule, DQMHistAnalysisHLTMonObjModule, DQMHistAnalysisInput2Module, DQMHistAnalysisInputPVSrvModule, DQMHistAnalysisInputTestModule, DQMHistAnalysisKLMModule, DQMHistAnalysisKLM2Module, DQMHistAnalysisMiraBelleModule, DQMHistAnalysisMonObjModule, DQMHistAnalysisOutputFileModule, DQMHistAnalysisOutputMonObjModule, DQMHistAnalysisOutputRelayMsgModule, DQMHistAnalysisPXDFitsModule, DQMHistAnalysisSVDClustersOnTrackModule, DQMHistAnalysisSVDDoseModule, DQMHistAnalysisSVDEfficiencyModule, DQMHistAnalysisSVDGeneralModule, DQMHistAnalysisSVDOccupancyModule, DQMHistAnalysisSVDOnMiraBelleModule, DQMHistAnalysisSVDUnpackerModule, DQMHistAnalysisTOPModule, DQMHistAnalysisTRGECLModule, DQMHistAnalysisTRGEFFModule, DQMHistAnalysisTRGGDLModule, DQMHistComparitorModule, DQMHistDeltaHistoModule, DQMHistReferenceModule, DQMHistSnapshotsModule, PyModule, SVDUnpackerDQMModule, TrackSetEvaluatorHopfieldNNDEVModule, vxdDigitMaskingModule, DQMHistAnalysisDeltaEpicsMonObjExampleModule, DQMHistAnalysisDeltaTestModule, DQMHistAnalysisEpicsOutputModule, DQMHistAnalysisPhysicsModule, DQMHistAnalysisPXDChargeModule, DQMHistAnalysisPXDTrackChargeModule, DQMHistAnalysisRooFitExampleModule, DQMHistAnalysisTRGModule, and DQMHistOutputToEPICSModule.

Definition at line 166 of file Module.h.

{};

evalCondition()

bool evalCondition ( ) const

inherited

If at least one condition was set, it is evaluated and true returned if at least one condition returns true.

If no condition or result value was defined, the method returns false. Otherwise, the condition is evaluated and true returned, if at least one condition returns true. To speed up the evaluation, the condition strings were already parsed in the method if_value().

Returns

True if at least one condition and return value exists and at least one condition expression was evaluated to true.

Definition at line 96 of file Module.cc.

{
  if (m_conditions.empty()) return false;
 
  //okay, a condition was set for this Module...
  if (!m_hasReturnValue) {
    B2FATAL("A condition was set for '" << getName() << "', but the module did not set a return value!");
  }
 
  for (const auto& condition : m_conditions) {
    if (condition.evaluate(m_returnValue)) {
      return true;
    }
  }
  return false;
}

event()

void event ( void  )

overridevirtual

This method is called for each event.

All processing of the event has to take place in this method.

Reimplemented from Module.

Definition at line 94 of file CDCDedxCorrectionModule.cc.

{
 
  // **************************************************
  //  LOOP OVER EACH DEDX MEASUREMENT (TRACK LEVEL)
  // **************************************************
  for (auto& dedxTrack : m_cdcDedxTracks) {
    if (dedxTrack.size() == 0) {
      B2WARNING("No good hits on this track...");
      continue;
    }
 
    // **************************************************
    //  LOOP OVER EACH DEDX MEASUREMENT (HIT LEVEL)
    // **************************************************
    // hit level
    int nhits = dedxTrack.size();
    double costh = dedxTrack.getCosTheta();
    std::vector<double> newLayerHits;
    double newLayerDe = 0, newLayerDx = 0;
 
    if (costh < TMath::Cos(150.0 * TMath::DegToRad()))continue; //-0.866
    if (costh > TMath::Cos(17.0 * TMath::DegToRad())) continue; //0.95
 
 
    double injtime = dedxTrack.getInjectionTime();
    double injring = dedxTrack.getInjectionRing();
 
    //--------REMOVEBAL--------
    //when CDST are reproduced with injection time
    if (injtime == -1 || injring == -1) {
      if (m_TTDInfo.isValid() && m_TTDInfo->hasInjection()) {
        injring = m_TTDInfo->isHER();
        injtime =  m_TTDInfo->getTimeSinceLastInjectionInMicroSeconds();
      }
    }
    dedxTrack.m_injring = injring;
    dedxTrack.m_injtime = injtime;
    //--------REMOVEBAL--------
 
    for (int i = 0; i < nhits; ++i) {
 
      //pay attention to deadwire or gain uses
      //getADCount is already corrected w/ non linear ADC payload
      //getADCbasecount is now uncorrect ADC
      int jadcbase = dedxTrack.getADCBaseCount(i);
      double jLayer = dedxTrack.getHitLayer(i);
      double jWire = dedxTrack.getWire(i);
      double jNDocaRS = dedxTrack.getDocaRS(i) / dedxTrack.getCellHalfWidth(i);
      double jEntaRS = dedxTrack.getEntaRS(i);
      double jPath = dedxTrack.getPath(i);
 
      double correction = dedxTrack.m_scale * dedxTrack.m_runGain * dedxTrack.m_timeGain * dedxTrack.m_cosCor * dedxTrack.m_cosEdgeCor *
                          dedxTrack.getTwoDCorrection(i) * dedxTrack.getOneDCorrection(i) * dedxTrack.getNonLADCCorrection(i);
      if (dedxTrack.getWireGain(i) > 0)correction *= dedxTrack.getWireGain(i); //also keep dead wire
 
      //Modify hit level dedx
      double newhitdedx = (m_relative) ? 1 / correction : 1.0;
      StandardCorrection(jadcbase, jLayer, jWire, jNDocaRS, jEntaRS, jPath, costh, injring, injtime, newhitdedx);
      dedxTrack.setDedx(i, newhitdedx);
 
      // do track level dedx and modifiy after loop over hits
      // rel const -> upto 6 from calibrated GT and 2 are direct from dedx track (no rel cal for them now)
      // abs const -> upto 6 from calibrated GT and 2 are direct from default GT
      if (m_relative) {
        //prewire gains need old tracks (old bad wire) and post need track new wg (new dead wire)
        //get same base adc + rel correction factor
        correction *= GetCorrection(jadcbase, jLayer, jWire, jNDocaRS, jEntaRS, costh, injring, injtime);
        if (!m_DBWireGains && dedxTrack.getWireGain(i) == 0)correction = 0;
      } else {
        //get modifed adc + abs correction factor
        correction = GetCorrection(jadcbase, jLayer, jWire, jNDocaRS, jEntaRS, costh, injring, injtime);
      }
 
      // combine hits accross layers
      if (correction != 0) {
        newLayerDe += jadcbase / correction;
        newLayerDx += jPath;
      }
 
      if (i + 1 < nhits && dedxTrack.getHitLayer(i + 1) == jLayer) {
        continue;
      } else {
        if (newLayerDx != 0)newLayerHits.push_back(newLayerDe / newLayerDx * std::sqrt(1 - costh * costh));
        newLayerDe = 0;
        newLayerDx = 0;
      }
    }
 
    // recalculate the truncated means
    calculateMeans(&(dedxTrack.m_dedxAvg),
                   &(dedxTrack.m_dedxAvgTruncatedNoSat),
                   &(dedxTrack.m_dedxAvgTruncatedErr),
                   newLayerHits);
 
    dedxTrack.m_dedxAvgTruncated = dedxTrack.m_dedxAvgTruncatedNoSat;
    HadronCorrection(costh, dedxTrack.m_dedxAvgTruncated);
  } // end loop over tracks
}

exposePythonAPI()

void exposePythonAPI ( )

staticinherited

Exposes methods of the Module class to Python.

Definition at line 325 of file Module.cc.

{
  // to avoid confusion between std::arg and boost::python::arg we want a shorthand namespace as well
  namespace bp = boost::python;
 
  docstring_options options(true, true, false); //userdef, py sigs, c++ sigs
 
  void (Module::*setReturnValueInt)(int) = &Module::setReturnValue;
 
  enum_<Module::EAfterConditionPath>("AfterConditionPath",
                                     R"(Determines execution behaviour after a conditional path has been executed:
 
.. attribute:: END
 
  End processing of this path after the conditional path. (this is the default for if_value() etc.)
 
.. attribute:: CONTINUE
 
  After the conditional path, resume execution after this module.)")
  .value("END", Module::EAfterConditionPath::c_End)
  .value("CONTINUE", Module::EAfterConditionPath::c_Continue)
  ;
 
  /* Do not change the names of >, <, ... we use them to serialize conditional pathes */
  enum_<Belle2::ModuleCondition::EConditionOperators>("ConditionOperator")
  .value(">", Belle2::ModuleCondition::EConditionOperators::c_GT)
  .value("<", Belle2::ModuleCondition::EConditionOperators::c_ST)
  .value(">=", Belle2::ModuleCondition::EConditionOperators::c_GE)
  .value("<=", Belle2::ModuleCondition::EConditionOperators::c_SE)
  .value("==", Belle2::ModuleCondition::EConditionOperators::c_EQ)
  .value("!=", Belle2::ModuleCondition::EConditionOperators::c_NE)
  ;
 
  enum_<Module::EModulePropFlags>("ModulePropFlags",
                                  R"(Flags to indicate certain low-level features of modules, see :func:`Module.set_property_flags()`, :func:`Module.has_properties()`. Most useful flags are:
 
.. attribute:: PARALLELPROCESSINGCERTIFIED
 
    This module can be run in parallel processing mode safely (All I/O must be done through the data store, in particular, the module must not write any files.)
 
.. attribute:: HISTOGRAMMANAGER
 
  This module is used to manage histograms accumulated by other modules
 
.. attribute:: TERMINATEINALLPROCESSES
 
  When using parallel processing, call this module's terminate() function in all processes. This will also ensure that there is exactly one process (single-core if no parallel modules found) or at least one input, one main and one output process.
)")
  .value("INPUT", Module::EModulePropFlags::c_Input)
  .value("OUTPUT", Module::EModulePropFlags::c_Output)
  .value("PARALLELPROCESSINGCERTIFIED", Module::EModulePropFlags::c_ParallelProcessingCertified)
  .value("HISTOGRAMMANAGER", Module::EModulePropFlags::c_HistogramManager)
  .value("INTERNALSERIALIZER", Module::EModulePropFlags::c_InternalSerializer)
  .value("TERMINATEINALLPROCESSES", Module::EModulePropFlags::c_TerminateInAllProcesses)
  ;
 
  //Python class definition
  class_<Module, PyModule> module("Module", R"(
Base class for Modules.
 
A module is the smallest building block of the framework.
A typical event processing chain consists of a Path containing
modules. By inheriting from this base class, various types of
modules can be created. To use a module, please refer to
:func:`Path.add_module()`.  A list of modules is available by running
``basf2 -m`` or ``basf2 -m package``, detailed information on parameters is
given by e.g. ``basf2 -m RootInput``.
 
The 'Module Development' section in the manual provides detailed information
on how to create modules, setting parameters, or using return values/conditions:
https://xwiki.desy.de/xwiki/rest/p/f4fa4/#HModuleDevelopment
 
)");
  module
  .def("__str__", &Module::getPathString)
  .def("name", &Module::getName, return_value_policy<copy_const_reference>(),
       "Returns the name of the module. Can be changed via :func:`set_name() <Module.set_name()>`, use :func:`type() <Module.type()>` for identifying a particular module class.")
  .def("type", &Module::getType, return_value_policy<copy_const_reference>(),
       "Returns the type of the module (i.e. class name minus 'Module')")
  .def("set_name", &Module::setName, args("name"), R"(
Set custom name, e.g. to distinguish multiple modules of the same type.
 
>>> path.add_module('EventInfoSetter')
>>> ro = path.add_module('RootOutput', branchNames=['EventMetaData'])
>>> ro.set_name('RootOutput_metadata_only')
>>> print(path)
[EventInfoSetter -> RootOutput_metadata_only]
 
)")
  .def("description", &Module::getDescription, return_value_policy<copy_const_reference>(),
       "Returns the description of this module.")
  .def("package", &Module::getPackage, return_value_policy<copy_const_reference>(),
       "Returns the package this module belongs to.")
  .def("available_params", &_getParamInfoListPython,
       "Return list of all module parameters as `ModuleParamInfo` instances")
  .def("has_properties", &Module::hasProperties, (bp::arg("properties")),
       R"DOCSTRING(Allows to check if the module has the given properties out of `ModulePropFlags` set.
 
>>> if module.has_properties(ModulePropFlags.PARALLELPROCESSINGCERTIFIED):
>>>     ...
 
Parameters:
  properties (int): bitmask of `ModulePropFlags` to check for.
)DOCSTRING")
  .def("set_property_flags", &Module::setPropertyFlags, args("property_mask"),
       "Set module properties in the form of an OR combination of `ModulePropFlags`.");
  {
    // python signature is too crowded, make ourselves
    docstring_options subOptions(true, false, false); //userdef, py sigs, c++ sigs
    module
    .def("if_value", &Module::if_value,
         (bp::arg("expression"), bp::arg("condition_path"), bp::arg("after_condition_path")= Module::EAfterConditionPath::c_End),
         R"DOCSTRING(if_value(expression, condition_path, after_condition_path=AfterConditionPath.END)
 
Sets a conditional sub path which will be executed after this
module if the return value set in the module passes the given ``expression``.
 
Modules can define a return value (int or bool) using ``setReturnValue()``,
which can be used in the steering file to split the Path based on this value, for example
 
>>> module_with_condition.if_value("<1", another_path)
 
In case the return value of the ``module_with_condition`` for a given event is
less than 1, the execution will be diverted into ``another_path`` for this event.
 
You could for example set a special return value if an error occurs, and divert
the execution into a path containing :b2:mod:`RootOutput` if it is found;
saving only the data producing/produced by the error.
 
After a conditional path has executed, basf2 will by default stop processing
the path for this event. This behaviour can be changed by setting the
``after_condition_path`` argument.
 
Parameters:
  expression (str): Expression to determine if the conditional path should be executed.
      This should be one of the comparison operators ``<``, ``>``, ``<=``,
      ``>=``, ``==``, or ``!=`` followed by a numerical value for the return value
  condition_path (Path): path to execute in case the expression is fulfilled
  after_condition_path (AfterConditionPath): What to do once the ``condition_path`` has been executed.
)DOCSTRING")
    .def("if_false", &Module::if_false,
         (bp::arg("condition_path"), bp::arg("after_condition_path")= Module::EAfterConditionPath::c_End),
         R"DOC(if_false(condition_path, after_condition_path=AfterConditionPath.END)
 
Sets a conditional sub path which will be executed after this module if
the return value of the module evaluates to False. This is equivalent to
calling `if_value` with ``expression=\"<1\"``)DOC")
    .def("if_true", &Module::if_true,
         (bp::arg("condition_path"), bp::arg("after_condition_path")= Module::EAfterConditionPath::c_End),
         R"DOC(if_true(condition_path, after_condition_path=AfterConditionPath.END)
 
Sets a conditional sub path which will be executed after this module if
the return value of the module evaluates to True. It is equivalent to
calling `if_value` with ``expression=\">=1\"``)DOC");
  }
  module
  .def("has_condition", &Module::hasCondition,
       "Return true if a conditional path has been set for this module "
       "using `if_value`, `if_true` or `if_false`")
  .def("get_all_condition_paths", &_getAllConditionPathsPython,
       "Return a list of all conditional paths set for this module using "
       "`if_value`, `if_true` or `if_false`")
  .def("get_all_conditions", &_getAllConditionsPython,
       "Return a list of all conditional path expressions set for this module using "
       "`if_value`, `if_true` or `if_false`")
  .add_property("logging", make_function(&Module::getLogConfig, return_value_policy<reference_existing_object>()),
                &Module::setLogConfig)

getAfterConditionPath()

Module::EAfterConditionPath getAfterConditionPath ( ) const

inherited

What to do after the conditional path is finished.

(defaults to c_End if no condition is set)

Definition at line 133 of file Module.cc.

{
  if (m_conditions.empty()) return EAfterConditionPath::c_End;
 
  //okay, a condition was set for this Module...
  if (!m_hasReturnValue) {
    B2FATAL("A condition was set for '" << getName() << "', but the module did not set a return value!");
  }
 
  for (const auto& condition : m_conditions) {
    if (condition.evaluate(m_returnValue)) {
      return condition.getAfterConditionPath();
    }
  }
 
  return EAfterConditionPath::c_End;
}

getAllConditionPaths()

std::vector< std::shared_ptr< Path > > getAllConditionPaths ( ) const

inherited

Return all condition paths currently set (no matter if the condition is true or not).

Definition at line 150 of file Module.cc.

{
  std::vector<std::shared_ptr<Path>> allConditionPaths;
  for (const auto& condition : m_conditions) {
    allConditionPaths.push_back(condition.getPath());
  }
 
  return allConditionPaths;
}

getAllConditions()

const std::vector< ModuleCondition > & getAllConditions ( ) const

inlineinherited

Return all set conditions for this module.

Definition at line 324 of file Module.h.

    {
      return m_conditions;
    }

getCondition()

const ModuleCondition * getCondition ( ) const

inlineinherited

Return a pointer to the first condition (or nullptr, if none was set)

Definition at line 314 of file Module.h.

    {
      if (m_conditions.empty()) {
        return nullptr;
      } else {
        return &m_conditions.front();
      }
    }

getConditionPath()

std::shared_ptr< Path > getConditionPath ( ) const

inherited

Returns the path of the last true condition (if there is at least one, else reaturn a null pointer).

Definition at line 113 of file Module.cc.

{
  PathPtr p;
  if (m_conditions.empty()) return p;
 
  //okay, a condition was set for this Module...
  if (!m_hasReturnValue) {
    B2FATAL("A condition was set for '" << getName() << "', but the module did not set a return value!");
  }
 
  for (const auto& condition : m_conditions) {
    if (condition.evaluate(m_returnValue)) {
      return condition.getPath();
    }
  }
 
  // if none of the conditions were true, return a null pointer.
  return p;
}

GetCorrection()

double GetCorrection	(	int &	adc,
		int	layer,
		int	wireID,
		double	doca,
		double	enta,
		double	costheta,
		double	ring,
		double	time
	)		const

Get the standard set of corrections.

Definition at line 306 of file CDCDedxCorrectionModule.cc.

{
  double correction = 1.0;
  if (m_scaleCor) correction *= m_DBScaleFactor->getScaleFactor();
  if (m_runGain) correction *= m_DBRunGain->getRunGain();
  if (m_timeGain) correction *= m_DBInjectTime->getCorrection("mean", ring, time);
  if (m_wireGain) correction *= m_DBWireGains->getWireGain(wireID);
  if (m_twoDCell) correction *= m_DB2DCell->getMean(layer, doca, enta);
  if (m_oneDCell) correction *= m_DB1DCell->getMean(layer, enta);
  if (m_cosineCor) correction *= m_DBCosineCor->getMean(costheta);
 
  //these last two are only for abs constant
  if (!m_relative) {
    if (m_nonlADC)adc = m_DBNonlADC->getCorrectedADC(adc, layer);
    if (m_cosineEdge && (costheta <= -0.850 || costheta >= 0.950)) {
      correction *= m_DBCosEdgeCor->getMean(costheta);
    }
  }
  return correction;
}

getDescription()

const std::string & getDescription ( ) const

inlineinherited

Returns the description of the module.

Definition at line 202 of file Module.h.

{return m_description;}

getFileNames()

virtual std::vector< std::string > getFileNames ( bool  outputFiles )

inlinevirtualinherited

Return a list of output filenames for this modules.

This will be called when basf2 is run with "--dry-run" if the module has set either the c_Input or c_Output properties.

If the parameter outputFiles is false (for modules with c_Input) the list of input filenames should be returned (if any). If outputFiles is true (for modules with c_Output) the list of output files should be returned (if any).

If a module has sat both properties this member is called twice, once for each property.

The module should return the actual list of requested input or produced output filenames (including handling of input/output overrides) so that the grid system can handle input/output files correctly.

This function should return the same value when called multiple times. This is especially important when taking the input/output overrides from Environment as they get consumed when obtained so the finalized list of output files should be stored for subsequent calls.

Reimplemented in RootInputModule, StorageRootOutputModule, and RootOutputModule.

Definition at line 134 of file Module.h.

    {
      return std::vector<std::string>();
    }

getLogConfig()

LogConfig & getLogConfig ( )

inlineinherited

Returns the log system configuration.

Definition at line 225 of file Module.h.

{return m_logConfig;}

getModules()

std::list< ModulePtr > getModules ( ) const

inlineoverrideprivatevirtualinherited

no submodules, return empty list

Implements PathElement.

Definition at line 506 of file Module.h.

{ return std::list<ModulePtr>(); }

getName()

const std::string & getName ( ) const

inlineinherited

Returns the name of the module.

This can be changed via e.g. set_name() in the steering file to give more useful names if there is more than one module of the same type.

For identifying the type of a module, using getType() (or type() in Python) is recommended.

Definition at line 187 of file Module.h.

{return m_name;}

getPackage()

const std::string & getPackage ( ) const

inlineinherited

Returns the package this module is in.

Definition at line 197 of file Module.h.

{return m_package;}

getParamInfoListPython()

std::shared_ptr< boost::python::list > getParamInfoListPython ( ) const

inherited

Returns a python list of all parameters.

Each item in the list consists of the name of the parameter, a string describing its type, a python list of all default values and the description of the parameter.

Returns

A python list containing the parameters of this parameter list.

Definition at line 279 of file Module.cc.

{
  return m_moduleParamList.getParamInfoListPython();
}

getParamList()

const ModuleParamList & getParamList ( ) const

inlineinherited

Return module param list.

Definition at line 363 of file Module.h.

{ return m_moduleParamList; }

getPathString()

std::string getPathString ( ) const

overrideprivatevirtualinherited

return the module name.

Implements PathElement.

Definition at line 192 of file Module.cc.

{
 
  std::string output = getName();
 
  for (const auto& condition : m_conditions) {
    output += condition.getString();
  }
 
  return output;
}

getReturnValue()

int getReturnValue ( ) const

inlineinherited

Return the return value set by this module.

This value is only meaningful if hasReturnValue() is true

Definition at line 381 of file Module.h.

{ return m_returnValue; }

getType()

const std::string & getType ( ) const

inherited

Returns the type of the module (i.e.

class name minus 'Module')

Definition at line 41 of file Module.cc.

{
  if (m_type.empty())
    B2FATAL("Module type not set for " << getName());
  return m_type;
}

HadronCorrection()

void HadronCorrection	(	double	costheta,
		double &	dedx
	)		const

Perform a hadron saturation correction.

(Set the peak of the truncated mean for electrons to 1)

Definition at line 262 of file CDCDedxCorrectionModule.cc.

{
  dedx = D2I(costheta, I2D(costheta, 1.00) / 1.00 * dedx);
}

hasCondition()

bool hasCondition ( ) const

inlineinherited

Returns true if at least one condition was set for the module.

Definition at line 311 of file Module.h.

{ return not m_conditions.empty(); };

hasProperties()

bool hasProperties ( unsigned int  propertyFlags ) const

inherited

Returns true if all specified property flags are available in this module.

Parameters

propertyFlags

Ored EModulePropFlags which should be compared with the module flags.

Definition at line 160 of file Module.cc.

{
  return (propertyFlags & m_propertyFlags) == propertyFlags;
}

hasReturnValue()

bool hasReturnValue ( ) const

inlineinherited

Return true if this module has a valid return value set.

Definition at line 378 of file Module.h.

{ return m_hasReturnValue; }

hasUnsetForcedParams()

bool hasUnsetForcedParams ( ) const

inherited

Returns true and prints error message if the module has unset parameters which the user has to set in the steering file.

Definition at line 166 of file Module.cc.

{
  auto missing = m_moduleParamList.getUnsetForcedParams();
  std::string allMissing = "";
  for (const auto& s : missing)
    allMissing += s + " ";
  if (!missing.empty())
    B2ERROR("The following required parameters of Module '" << getName() << "' were not specified: " << allMissing <<
            "\nPlease add them to your steering file.");
  return !missing.empty();
}

I2D()

double I2D	(	const double	cosTheta,
		const double	I
	)		const

Saturation correction: convert the actural ionization (I) to measured ionization (D)

Definition at line 351 of file CDCDedxCorrectionModule.cc.

{
  double absCosTheta = fabs(cosTheta);
  double projection  = pow(absCosTheta, m_hadronpars[3]) + m_hadronpars[2];
 
  if (projection == 0 || m_hadronpars[4] == 0) {
    B2WARNING("Something wrong with dE/dx hadron constants!");
    return I;
  }
 
  double a =  m_hadronpars[0] / projection;
  double b =  1 - m_hadronpars[1] / projection * (I / m_hadronpars[4]);
  double c = -1.0 * I / m_hadronpars[4];
 
  if (b == 0 && a == 0) {
    B2WARNING("both a and b coefficiants for hadron correction are 0");
    return I;
  }
 
  double discr = b * b - 4.0 * a * c;
  if (discr < 0) {
    B2WARNING("negative discriminant; return uncorrectecd value");
    return I;
  }
 
  double D = (a != 0) ? (-b + sqrt(discr)) / (2.0 * a) : -c / b;
  if (D < 0) {
    B2WARNING("D is less 0! will try another solution");
    D = (a != 0) ? (-b - sqrt(discr)) / (2.0 * a) : -c / b;
    if (D < 0) {
      B2WARNING("D is still less 0! just return uncorrectecd value");
      return I;
    }
  }
 
  return D;
}

if_false()

void if_false ( const std::shared_ptr< Path > &  path, EAfterConditionPath  afterConditionPath = EAfterConditionPath::c_End  )

inherited

A simplified version to add a condition to the module.

Please note that successive calls of this function will add more than one condition to the module. If more than one condition results in true, only the last of them will be used.

Please be careful: Avoid creating cyclic paths, e.g. by linking a condition to a path which is processed before the path where this module is located in.

It is equivalent to the if_value() method, using the expression "<1". This method is meant to be used together with the setReturnValue(bool value) method.

Parameters

path	Shared pointer to the Path which will be executed if the return value is false.
afterConditionPath	What to do after executing 'path'.

Definition at line 85 of file Module.cc.

{
  if_value("<1", path, afterConditionPath);
}

if_true()

void if_true ( const std::shared_ptr< Path > &  path, EAfterConditionPath  afterConditionPath = EAfterConditionPath::c_End  )

inherited

A simplified version to set the condition of the module.

Please note that successive calls of this function will add more than one condition to the module. If more than one condition results in true, only the last of them will be used.

Please be careful: Avoid creating cyclic paths, e.g. by linking a condition to a path which is processed before the path where this module is located in.

It is equivalent to the if_value() method, using the expression ">=1". This method is meant to be used together with the setReturnValue(bool value) method.

Parameters

path	Shared pointer to the Path which will be executed if the return value is true.
afterConditionPath	What to do after executing 'path'.

Definition at line 90 of file Module.cc.

{
  if_value(">=1", path, afterConditionPath);
}

if_value()

void if_value ( const std::string &  expression, const std::shared_ptr< Path > &  path, EAfterConditionPath  afterConditionPath = EAfterConditionPath::c_End  )

inherited

Add a condition to the module.

Please note that successive calls of this function will add more than one condition to the module. If more than one condition results in true, only the last of them will be used.

See https://xwiki.desy.de/xwiki/rest/p/a94f2 or ModuleCondition for a description of the syntax.

Please be careful: Avoid creating cyclic paths, e.g. by linking a condition to a path which is processed before the path where this module is located in.

Parameters

expression	The expression of the condition.
path	Shared pointer to the Path which will be executed if the condition is evaluated to true.
afterConditionPath	What to do after executing 'path'.

Definition at line 79 of file Module.cc.

{
  m_conditions.emplace_back(expression, path, afterConditionPath);
}

initialize()

void initialize ( void  )

overridevirtual

Initialize the Module.

This method is called only once before the actual event processing starts.

Reimplemented from Module.

Definition at line 39 of file CDCDedxCorrectionModule.cc.

{
  // register in datastore
  m_cdcDedxTracks.isRequired();
 
  // make sure the calibration constants are reasonable
  // run gains
  if (m_DBRunGain->getRunGain() == 0) {
    B2WARNING("Run gain is zero for this run");
  }
 
  // wire gains
  for (unsigned int i = 0; i < c_nSenseWires; ++i) {
    if (m_DBWireGains->getWireGain(i) == 0)
      B2WARNING("Wire gain is zero for this wire: " << i);
  }
 
  // cosine correction (store the bin edges for extrapolation)
  unsigned int ncosbins = m_DBCosineCor->getSize();
  for (unsigned int i = 0; i < ncosbins; ++i) {
    double gain = m_DBCosineCor->getMean(i);
    if (gain == 0)
      B2ERROR("Cosine gain is zero for this bin " << i);
  }
 
  // get the hadron correction parameters
  if (!m_DBHadronCor || m_DBHadronCor->getSize() == 0) {
    B2WARNING("No hadron correction parameters!");
    for (int i = 0; i < 4; ++i)
      m_hadronpars.push_back(0.0);
    m_hadronpars.push_back(1.0);
  } else m_hadronpars = m_DBHadronCor->getHadronPars();
 
  int jwire = -1;
  B2INFO("Creating CDCGeometryPar object");
  CDCGeometryPar& cdcgeo = CDCGeometryPar::Instance();
 
  for (unsigned int il = 0; il < c_maxNSenseLayers; il++) {
    int activewires = 0;
    m_lgainavg[il] = 0.0;
 
    for (unsigned int iw = 0; iw < cdcgeo.nWiresInLayer(il); ++iw) {
      jwire++;
      if (m_DBWireGains->getWireGain(jwire) > 0.) {
        //active wire only
        m_lgainavg[il] += m_DBWireGains->getWireGain(jwire);
        activewires++;
      }
    }
    if (activewires > 0) m_lgainavg[il] /= activewires;
    else m_lgainavg[il] = 1.0;
  }
}

OneDCorrection()

void OneDCorrection	(	int	layer,
		double	enta,
		double &	dedx
	)		const

Perform a wire gain correction.

Definition at line 239 of file CDCDedxCorrectionModule.cc.

{
  double gain = (m_DB1DCell) ? m_DB1DCell->getMean(layer, enta) : 1.0;
  if (gain != 0) dedx = dedx / gain;
  else dedx = 0;
}

RunGainCorrection()

void RunGainCorrection

(

double &

dedx

)

const

Perform a run gain correction.

Definition at line 200 of file CDCDedxCorrectionModule.cc.

{
  double gain = m_DBRunGain->getRunGain();
  if (gain != 0) {
    dedx = dedx / gain;
  } else dedx = 0;
}

setAbortLevel()

void setAbortLevel ( int  abortLevel )

inherited

Configure the abort log level.

Definition at line 67 of file Module.cc.

{
  m_logConfig.setAbortLevel(static_cast<LogConfig::ELogLevel>(abortLevel));
}

setDebugLevel()

void setDebugLevel ( int  debugLevel )

inherited

Configure the debug messaging level.

Definition at line 61 of file Module.cc.

{
  m_logConfig.setDebugLevel(debugLevel);
}

setDescription()

void setDescription ( const std::string &  description )

protectedinherited

Sets the description of the module.

Parameters

description

A description of the module.

Definition at line 214 of file Module.cc.

{
  m_description = description;
}

setLogConfig()

void setLogConfig ( const LogConfig &  logConfig )

inlineinherited

Set the log system configuration.

Definition at line 230 of file Module.h.

{m_logConfig = logConfig;}

setLogInfo()

void setLogInfo ( int  logLevel, unsigned int  logInfo  )

inherited

Configure the printed log information for the given level.

Parameters

logLevel	The log level (one of LogConfig::ELogLevel)
logInfo	What kind of info should be printed? ORed combination of LogConfig::ELogInfo flags.

Definition at line 73 of file Module.cc.

{
  m_logConfig.setLogInfo(static_cast<LogConfig::ELogLevel>(logLevel), logInfo);
}

setLogLevel()

void setLogLevel ( int  logLevel )

inherited

Configure the log level.

Definition at line 55 of file Module.cc.

{
  m_logConfig.setLogLevel(static_cast<LogConfig::ELogLevel>(logLevel));
}

setName()

void setName ( const std::string &  name )

inlineinherited

Set the name of the module.

Note

The module name is set when using the REG_MODULE macro, but the module can be renamed before calling process() using the set_name() function in your steering file.

Parameters

name	The name of the module

Definition at line 214 of file Module.h.

{ m_name = name; };

setParamList()

void setParamList ( const ModuleParamList &  params )

inlineprotectedinherited

Replace existing parameter list.

Definition at line 501 of file Module.h.

{ m_moduleParamList = params; }

setParamPython()

void setParamPython ( const std::string &  name, const boost::python::object &  pyObj  )

privateinherited

Implements a method for setting boost::python objects.

The method supports the following types: list, dict, int, double, string, bool The conversion of the python object to the C++ type and the final storage of the parameter value is done in the ModuleParam class.

Parameters

name	The unique name of the parameter.
pyObj	The object which should be converted and stored as the parameter value.

Definition at line 234 of file Module.cc.

{
  LogSystem& logSystem = LogSystem::Instance();
  logSystem.updateModule(&(getLogConfig()), getName());
  try {
    m_moduleParamList.setParamPython(name, pyObj);
  } catch (std::runtime_error& e) {
    throw std::runtime_error("Cannot set parameter '" + name + "' for module '"
                             + m_name + "': " + e.what());
  }
 
  logSystem.updateModule(nullptr);
}

setParamPythonDict()

void setParamPythonDict ( const boost::python::dict &  dictionary )

privateinherited

Implements a method for reading the parameter values from a boost::python dictionary.

The key of the dictionary has to be the name of the parameter and the value has to be of one of the supported parameter types.

Parameters

dictionary

The python dictionary from which the parameter values are read.

Definition at line 249 of file Module.cc.

{
 
  LogSystem& logSystem = LogSystem::Instance();
  logSystem.updateModule(&(getLogConfig()), getName());
 
  boost::python::list dictKeys = dictionary.keys();
  int nKey = boost::python::len(dictKeys);
 
  //Loop over all keys in the dictionary
  for (int iKey = 0; iKey < nKey; ++iKey) {
    boost::python::object currKey = dictKeys[iKey];
    boost::python::extract<std::string> keyProxy(currKey);
 
    if (keyProxy.check()) {
      const boost::python::object& currValue = dictionary[currKey];
      setParamPython(keyProxy, currValue);
    } else {
      B2ERROR("Setting the module parameters from a python dictionary: invalid key in dictionary!");
    }
  }
 
  logSystem.updateModule(nullptr);
}

setPropertyFlags()

void setPropertyFlags ( unsigned int  propertyFlags )

inherited

Sets the flags for the module properties.

Parameters

propertyFlags

bitwise OR of EModulePropFlags

Definition at line 208 of file Module.cc.

{
  m_propertyFlags = propertyFlags;
}

setReturnValue() [1/2]

void setReturnValue ( bool  value )

protectedinherited

Sets the return value for this module as bool.

The bool value is saved as an integer with the convention 1 meaning true and 0 meaning false. The value can be used in the steering file to divide the analysis chain into several paths.

Parameters

value

The value of the return value.

Definition at line 227 of file Module.cc.

{
  m_hasReturnValue = true;
  m_returnValue = value;
}

setReturnValue() [2/2]

void setReturnValue ( int  value )

protectedinherited

Sets the return value for this module as integer.

The value can be used in the steering file to divide the analysis chain into several paths.

Parameters

value

The value of the return value.

Definition at line 220 of file Module.cc.

{
  m_hasReturnValue = true;
  m_returnValue = value;
}

setType()

void setType ( const std::string &  type )

protectedinherited

Set the module type.

Only for use by internal modules (which don't use the normal REG_MODULE mechanism).

Definition at line 48 of file Module.cc.

{
  if (!m_type.empty())
    B2FATAL("Trying to change module type from " << m_type << " is not allowed, the value is assumed to be fixed.");
  m_type = type;
}

StandardCorrection()

void StandardCorrection	(	int	adc,
		int	layer,
		int	wireID,
		double	doca,
		double	enta,
		double	length,
		double	costheta,
		double	ring,
		double	time,
		double &	dedx
	)		const

Perform a standard set of corrections.

Definition at line 267 of file CDCDedxCorrectionModule.cc.

{
 
  if (!m_relative && m_nonlADC)
    adc = m_DBNonlADC->getCorrectedADC(adc, layer);
 
  dedx *= adc * std::sqrt(1 - costheta * costheta) / length;
 
  if (m_scaleCor) {
    double scale = m_DBScaleFactor->getScaleFactor();
    if (scale != 0) dedx = dedx / scale;
    else dedx = 0;
  }
 
  if (m_runGain)
    RunGainCorrection(dedx);
 
  if (m_timeGain)
    TimeGainCorrection(dedx, ring, time);
 
  if (m_wireGain)
    WireGainCorrection(wireID, dedx, layer);
 
  if (m_cosineCor)
    CosineCorrection(costheta, dedx);
 
  //only if constants are abs are for specific costh
  if (!m_relative && m_cosineEdge && (costheta <= -0.850 || costheta >= 0.950))
    CosineEdgeCorrection(costheta, dedx);
 
  if (m_twoDCell)
    TwoDCorrection(layer, doca, enta, dedx);
 
  if (m_oneDCell)
    OneDCorrection(layer, enta, dedx);
}

terminate()

void terminate ( void  )

overridevirtual

End of the event processing.

Reimplemented from Module.

Definition at line 194 of file CDCDedxCorrectionModule.cc.

{
 
  B2INFO("CDCDedxCorrectionModule exiting...");
}

TimeGainCorrection()

void TimeGainCorrection	(	double &	dedx,
		double	ring,
		double	time
	)		const

Perform a injection time gain correction.

Definition at line 208 of file CDCDedxCorrectionModule.cc.

{
  double gain = m_DBInjectTime->getCorrection("mean", ring, time);
  if (gain != 0) {
    dedx = dedx / gain;
  } else dedx = 0;
}

TwoDCorrection()

void TwoDCorrection	(	int	layer,
		double	doca,
		double	enta,
		double &	dedx
	)		const

Perform a 2D correction.

Definition at line 230 of file CDCDedxCorrectionModule.cc.

{
 
  double gain = (m_DB2DCell) ? m_DB2DCell->getMean(layer, doca, enta) : 1.0;
  if (gain != 0) dedx = dedx / gain;
  else dedx = 0;
}

WireGainCorrection()

void WireGainCorrection	(	int	wireID,
		double &	dedx,
		int	layer
	)		const

Perform a wire gain correction.

Definition at line 216 of file CDCDedxCorrectionModule.cc.

{
  double gain = m_DBWireGains->getWireGain(wireID);
  if (gain != 0) dedx = dedx / gain;
  else {
    //rel-abs method needs all wire for cal but w/ this method post calis (e.g.final RG)
    //will also see all hitdedx but that is not an issue for track level calibration
    if (m_relative)dedx = 0;
    else {
      if (m_lgainavg.at(layer) > 0)dedx = dedx / m_lgainavg.at(layer);
    }
  }
}

Member Data Documentation

m_cdcDedxTracks

StoreArray<CDCDedxTrack> m_cdcDedxTracks

private

Store array: CDCDedxTrack.

Definition at line 129 of file CDCDedxCorrectionModule.h.

m_conditions

std::vector<ModuleCondition> m_conditions

privateinherited

Module condition, only non-null if set.

Definition at line 521 of file Module.h.

m_cosineCor

bool m_cosineCor

private

boolean to apply cosine correction

Definition at line 120 of file CDCDedxCorrectionModule.h.

m_cosineEdge

bool m_cosineEdge

private

boolean to apply cosine edge

Definition at line 126 of file CDCDedxCorrectionModule.h.

m_DB1DCell

DBObjPtr<CDCDedx1DCell> m_DB1DCell

private

1D correction DB object

Definition at line 140 of file CDCDedxCorrectionModule.h.

m_DB2DCell

DBObjPtr<CDCDedx2DCell> m_DB2DCell

private

2D correction DB object

Definition at line 139 of file CDCDedxCorrectionModule.h.

m_DBCosEdgeCor

DBObjPtr<CDCDedxCosineEdge> m_DBCosEdgeCor

private

cosine edge calibration

Definition at line 143 of file CDCDedxCorrectionModule.h.

m_DBCosineCor

DBObjPtr<CDCDedxCosineCor> m_DBCosineCor

private

Electron saturation correction DB object.

Definition at line 138 of file CDCDedxCorrectionModule.h.

m_DBHadronCor

DBObjPtr<CDCDedxHadronCor> m_DBHadronCor

private

hadron saturation parameters

Definition at line 141 of file CDCDedxCorrectionModule.h.

m_DBInjectTime

DBObjPtr<CDCDedxInjectionTime> m_DBInjectTime

private

time gain/reso DB object

Definition at line 137 of file CDCDedxCorrectionModule.h.

m_DBMomentumCor

DBObjPtr<CDCDedxMomentumCor> m_DBMomentumCor

private

Momentum correction DB object.

Definition at line 134 of file CDCDedxCorrectionModule.h.

m_DBNonlADC

DBObjPtr<CDCDedxADCNonLinearity> m_DBNonlADC

private

hadron saturation non linearity

Definition at line 142 of file CDCDedxCorrectionModule.h.

m_DBRunGain

DBObjPtr<CDCDedxRunGain> m_DBRunGain

private

Run gain DB object.

Definition at line 136 of file CDCDedxCorrectionModule.h.

m_DBScaleFactor

DBObjPtr<CDCDedxScaleFactor> m_DBScaleFactor

private

Scale factor to make electrons ~1.

Definition at line 133 of file CDCDedxCorrectionModule.h.

m_DBWireGains

DBObjPtr<CDCDedxWireGain> m_DBWireGains

private

Wire gain DB object.

Definition at line 135 of file CDCDedxCorrectionModule.h.

m_description

std::string m_description

privateinherited

The description of the module.

Definition at line 511 of file Module.h.

m_hadronpars

std::vector<double> m_hadronpars

private

hadron saturation parameters

Definition at line 144 of file CDCDedxCorrectionModule.h.

m_hasReturnValue

bool m_hasReturnValue

privateinherited

True, if the return value is set.

Definition at line 518 of file Module.h.

m_lgainavg

std::array<double, 56> m_lgainavg

private

average calibration factor for the layer

Definition at line 145 of file CDCDedxCorrectionModule.h.

m_logConfig

LogConfig m_logConfig

privateinherited

The log system configuration of the module.

Definition at line 514 of file Module.h.

m_moduleParamList

ModuleParamList m_moduleParamList

privateinherited

List storing and managing all parameter of the module.

Definition at line 516 of file Module.h.

m_momCor

bool m_momCor

private

boolean to apply momentum correction

Definition at line 117 of file CDCDedxCorrectionModule.h.

m_name

std::string m_name

privateinherited

The name of the module, saved as a string (user-modifiable)

Definition at line 508 of file Module.h.

m_nonlADC

bool m_nonlADC

private

boolean to apply non linear ADC

Definition at line 127 of file CDCDedxCorrectionModule.h.

m_oneDCell

bool m_oneDCell

private

boolean to apply 1D correction

Definition at line 125 of file CDCDedxCorrectionModule.h.

m_package

std::string m_package

privateinherited

Package this module is found in (may be empty).

Definition at line 510 of file Module.h.

m_propertyFlags

unsigned int m_propertyFlags

privateinherited

The properties of the module as bitwise or (with |) of EModulePropFlags.

Definition at line 512 of file Module.h.

m_relative

bool m_relative

private

boolean to apply relative or absolute correction

Definition at line 115 of file CDCDedxCorrectionModule.h.

m_removeHighest

double m_removeHighest

private

upper bound for truncated mean

Definition at line 153 of file CDCDedxCorrectionModule.h.

m_removeLowest

double m_removeLowest

private

lower bound for truncated mean

Definition at line 151 of file CDCDedxCorrectionModule.h.

m_returnValue

int m_returnValue

privateinherited

The return value.

Definition at line 519 of file Module.h.

m_runGain

bool m_runGain

private

boolean to apply run gains

Definition at line 122 of file CDCDedxCorrectionModule.h.

m_scaleCor

bool m_scaleCor

private

boolean to apply scale factor

Definition at line 119 of file CDCDedxCorrectionModule.h.

m_timeGain

bool m_timeGain

private

boolean to apply injection time gains

Definition at line 123 of file CDCDedxCorrectionModule.h.

m_TTDInfo

StoreObjPtr<EventLevelTriggerTimeInfo> m_TTDInfo

private

Store Object Ptr: EventLevelTriggerTimeInfo.

Definition at line 130 of file CDCDedxCorrectionModule.h.

m_twoDCell

bool m_twoDCell

private

boolean to apply 2D correction

Definition at line 124 of file CDCDedxCorrectionModule.h.

m_type

std::string m_type

privateinherited

The type of the module, saved as a string.

Definition at line 509 of file Module.h.

m_useDBMomCor

bool m_useDBMomCor

private

boolean to apply momentum correction from DB

Definition at line 118 of file CDCDedxCorrectionModule.h.

m_wireGain

bool m_wireGain

private

boolean to apply wire gains

Definition at line 121 of file CDCDedxCorrectionModule.h.

---

The documentation for this class was generated from the following files:

• reconstruction/modules/CDCDedxCorrection/include/CDCDedxCorrectionModule.h
• reconstruction/modules/CDCDedxCorrection/src/CDCDedxCorrectionModule.cc