Information for skim experts

21.4. Information for skim experts#

Tip

The functions and tools documented here are intended for skim liaisons and developers. If you are only interested in the selection criteria, then this section is probably not relevant for you.

21.4.1. Writing a skim#

In the skim package, skims are defined via the BaseSkim class. The skim package is organised around this for the following reasons:

this keeps the package organised, with every skim being defined in a predictable way,
this allows the skims to be located by standard helper tools such as b2skim-run and b2skim-stats-print, and
skims must be combined with other skims to reduce the number of grid job submissions, and the CombinedSkim class is written to combined objects of type BaseSkim.

To write a new skim, please follow these steps:

Start by defining a class which inherits from BaseSkim and give it the name of your skim. Put the class in an appropriate skim module for your working group. For example, the skim DarkSinglePhoton belongs in skim/scripts/skim/dark.py, and begins with the following definition:
```
class DarkSinglePhoton(BaseSkim):
    # docstring here explaining reconstructed decay modes and applied cuts.
```
[Mandatory] Tell us about your skim by setting the following attributes:
- __description__: one-line summary describing the purpose of your skim.
- __category__: a list of category keywords.
- __authors__: list of skim authors.
- __contact__: the name and contact email of the skim liaison responsible for this skim.
BaseSkim requires you to set these attributes in each subclass. Once these are set, we can we add a lovely auto-generated header to the documentation of the skim by using the fancy_skim_header decorator.
```
@fancy_skim_header
class DarkSinglePhoton(BaseSkim):
    # docstring here describing your skim, and explaining cuts.
```
This header will appear as a “Note” block at the top of your skim class on Sphinx, and will also appear at the top of the help function in an interactive Python session:
```
>>> from skim.WGs.foo import MySkim
>>> help(MySkim)
```
Tip

If your skim does not define __description__, __category__, __authors__, __contact__, or build_lists, then you will see an error message like:
```
TypeError: Can't instantiate abstract class SinglePhotonDark with abstract methods __authors__
```
This can be fixed by defining these required attributes and methods.
If you require any standard lists to be loaded for your skim, override the method load_standard_lists. This will be run before build_lists and additional_setup.

This step is separated into its own function so that the CombinedSkim class can do special handling of these functions to avoid accidentally loading a standard list twice when combining skims.
If any further setup is required, then override the additional_setup method.
[Mandatory] Define all cuts by overriding build_lists. This function is expected to return the list of particle lists reconstructed by the skim.

Changed in version release-06-00-00: Previously, this function was expected to set the attribute BaseSkim.SkimLists. This is now handled internally by BaseSkim, and BaseSkim.build_lists is expected to return the list of particle list names.
Skims can crash on the grid if the log files are too large. If any modules is producing too much output, then override the attribute NoisyModules as a list of such modules, and their output will be set to print only error-level messages.
By default, the skim test file is a neutral $B$ pair sample with beam background. If your skim has a retention rate of close to zero for this sample type, you may wish to override the attribute TestSampleProcess. This should be a label of a generic MC type, e.g. "ccbar", "charged", or "eemumu". This attribute is passed to skim.utils.testfiles.get_test_file, which retrieves a suitable test file, available in the property TestFiles.
[Mandatory] Add your skim to the registry, with an appropriate skim code (see Skim Registry).

With all of these steps followed, you will now be able to run your skim using the skim command line tools. To make sure that you skim does what you expect, and is feasible to put into production, please also complete the following steps:

Test your skim! The primary point of skims is to be run on the grid, so you want to be sure that the retention rate and processing time are low enough to make this process smooth.

The skim package contains a set of tools to make this straightforward for you. See Testing skim performance for more details.

Define validation histograms for your skim by overriding the method BaseSkim.validation_histograms, and running b2skim-generate-validation to auto-generate a steering file in the skim validation directory. The validation_histograms method should not be long: it should simply use the particle lists that have been created by build_lists to plot one or two key variables. If possible, do not do any further reconstruction or particle list loading here. Below is an example of what a typical method ought to contain.

def validation_histograms(self, path):
    # The validation package is not part of the light releases, so this import
    # must be made inside this function rather than at the top of the file.
    from validation_tools.metadata import create_validation_histograms

    # Combine B+ particle lists for a single histogram (assuming self.SkimLists only
    # has B+ particle lists). Not necessary if only one particle list is created.
    ma.copyLists(f"B+:{self}_validation", self.SkimLists, path=path)

    create_validation_histograms(
        rootfile=f"{self}_validation.root",
        particlelist=f"B+:{self}_validation",
        variables_1d=[
            ("deltaE", 20, -0.5, 0.5, "#Delta E", __liaison__,
             "$\\Delta E$ distribution of reconstructed $B^{+}$ candidates",
             "Peak around 0", "#Delta E [GeV]", "B^{+} candidates"),
            # Include "shifter" flag to have this plot shown to shifters
            ("Mbc", 20, 5.2, 5.3, "M_{bc}", __liaison__,
             "$M_{\\rm bc}$ distribution of reconstructed $B^{+}$ candidates",
             "Peak around 5.28", "M_{bc} [GeV]", "B^{+} candidates", "shifter")],
    )

21.4.2. Building skim lists in a steering file#

Calling an instance of a skim class will run the particle list loaders, setup function, list builder function, and uDST output function. So a minimal skim steering file might consist of the following:

import basf2 as b2
import modularAnalysis as ma
from skim.WGs.foo import MySkim

path = b2.Path()
ma.inputMdstList([], path=path)
skim = MySkim()
skim(path)  # __call__ method loads standard lists, creates skim lists, and saves to uDST
b2.process(path)

After skim(path) has been called, the skim list names are stored in the Python list skim.SkimLists.

Warning

There is a subtle but important technicality here: if BaseSkim.skim_event_cuts has been called, then the skim lists are not built for all events on the path, but they are built for all events on a conditional path. A side-effect of this is that no post-skim path can be safely defined for the CombinedSkim class (since a combined skim of five skims may have up to five conditional paths).

After a skim has been added to the path, the attribute BaseSkim.postskim_path contains a safe path for adding subsequent modules to (e.g. performing further reconstruction using the skim candidates). However, the final call to basf2.process must be passed the original (main) path.

skim = MySkim()
skim(path)
# Add subsequent modules to skim.postskim_path
ma.variablesToNtuple(skim.SkimLists[0], ["pt", "E"], path=skim.postskim_path)
# Process full path
b2.process(path)

The above code snippet will produce both uDST and ntuple output. To only build the skim lists without writing to uDST, pass the configuration parameter outputUdst=False during initialisation of the skim object:

skim = MySkim(udstOutput=False)
skim(path)

Disabling uDST output may be useful to you if you want to do any of the following:

print the statistics of the skim without producing any output files,
build the skim lists and perform further reconstruction or fitting on the skim candidates before writing the ROOT output,
go directly from unskimmed MDST to analysis ntuples in a single steering file (but please consider first using the centrally-produce skimmed uDSTs), or
use the skim flag to build the skim lists and write an event-level ntuple with information about which events pass the skim.

Tip

The tool b2skim-generate can be used to generate simple skim steering files like the example above. The tool b2skim-run is a standalone tool for running skims. b2skim-run is preferable for quickly testing a skim during skim development. b2skim-generate should be used as a starting point if you are doing anything more complicated than simply running a skim on an MDST file to produce a uDST file.

Skim flags#

When a skim is added to the path, an entry is added to the event extra info to indicate whether an event passes the skim or not. This flag is of the form eventExtraInfo(passes_<SKIMNAME>) (aliased to passes_<SKIMNAME> for convenience), and the flag name is stored in the property BaseSkim.flag.

In the example below, we build the skim lists, skip the uDST output, and write an ntuple containing the skim flag and other event-level variables:

skim = MySkim(udstOutput=False)
skim(path)
ma.variablesToNtuple("", [skim.flag, "nTracks"], path=path)
b2.process(path)

Skim flags can also be used in combined skims, with the individual flags being available in the list CombinedSkim.flags. In the example below, we run three skims in a combined skim, disable the uDST output, and then save the three skim flags to an ntuple.

skim = CombinedSkim(
    SkimA(),
    SkimB(),
    SkimC(),
    udstOutput=False,
)
skim(path)
ma.variablesToNtuple("", skim.flags + ["nTracks"], path=path)
b2.process(path)

Tip

Skim flags are guaranteed to work on the main path (the variable path in the above examples). However, any other modules attempting to access the skim lists should be added to the postskim_path.

21.4.3. Running a skim#

In the skim package, there are command-line tools available for running skims, documented below. These take a skim name as a command line argument, and run the code defined in the corresponding subclass of BaseSkim.

`b2skim-run`: Run a skim#

Tip

This tool completely supplants the <SkimName>_Skim_Standalone.py steering files from previous versions of basf2. The standalone/ and combined/ directories no longer exist in the skim package from version-05-00-00 onwards.

General steering file for running skims.

usage: b2skim-run [-h] {single,combined,flagged,module} ...

Positional Arguments#

action

Possible choices: single, combined, flagged, module

Run just one skim, or multiple skims at once.

Sub-commands#

single#

Run a single skim.

b2skim-run single [-h] [-o Output uDST location] [-n MaxInputEvents]
                  [-i InputFileList [InputFileList ...]] [--data]
                  [--analysis-globaltag AnalysisGlobaltag]
                  [--pid-globaltag PIDGlobaltag]
                  Skim

Positional Arguments#

Skim

Possible choices: f_custom, f_SLME_p1, f_SLME_p2, f_SLME_p3, f_SLME_p4, f_EWP_p1, f_EWP_p2, f_EWP_p3, f_EWP_p4, f_TDCPV_p1, f_TDCPV_p2, f_TDCPV_p3, f_TDCPV_p4, f_bhadronic_p1, f_bhadronic_p2, f_bhadronic_p3, f_bhadronic_p4, f_quarkonium_p1, f_quarkonium_p2, f_quarkonium_p3, f_quarkonium_p4, f_charm_p1, f_charm_p2, f_charm_p3, f_charm_p4, f_dark_p1, f_dark_p2, f_dark_p3, f_dark_p4, f_tau_p1, f_tau_p2, f_tau_p3, f_tau_p4, Random, SystematicsTracking, Resonance, SystematicsRadMuMu, SystematicsEELL, SystematicsRadEE, SystematicsLambda, SystematicsPhiGamma, SystematicsFourLeptonFromHLTFlag, SystematicsRadMuMuFromHLTFlag, SystematicsJpsi, SystematicsKshort, SystematicsBhabha, SystematicsCombinedHadronic, SystematicsCombinedLowMulti, SystematicsDstar, PRsemileptonicUntagged, LeptonicUntagged, SLUntagged, B0toDstarl_Kpi_Kpipi0_Kpipipi, BtoDl_and_ROE_e_or_mu_or_lowmult, feiHadronicB0, feiHadronicBplus, feiSLB0, feiSLB0_RDstar, feiSLBplus, feiHadronic, feiHadronic_DstEllNu, feiSL, BtoXgamma, BtoXll, BtoXll_LFV, B0TwoBody, FourLepton, RadiativeDilepton, TDCPV_ccs, TDCPV_qqs, TDCPV_klong, TDCPV_dilepton, TDCPV_inclusiveJpsi, BtoD0h_Kspi0, BtoD0h_Kspipipi0, BtoDstarpipipi0_D0pi_Kpi, B0toDpi_Kpipi, B0toDpi_KpipiLooseDelE, B0toDpi_Kspi, B0toDstarPi_D0pi_Kpi, B0toDstarPi_D0pi_Kpipipi_Kpipi0, B0toDrho_Kpipi, B0toDrho_Kspi, B0toDstarRho_D0pi_Kpi, B0toDstarRho_D0pi_Kpipipi_Kpipi0, BptoD0etapi_Kpi, BptoD0pipi0_Kpi, BtoD0h_hh, BtoD0h_Kpi, B0toDstarpipi0_D0pi_Kpi, BtoD0h_Kpipipi_Kpipi0, B0toDstaretapi_D0pi_Kpi, BtoD0h_Kshh, BtoD0rho_Kpi, BtoD0rho_Kpipipi_Kpipi0, B0toDD_Kpipi_Kspi, B0toDstarD, B0toD0Kpipi0_pi0, B0toDs1D, B0toDDs0star, B0toDomegapi_Kpipi_pipipi0, B0toDomegapi_Kspi_pipipi0, BtoD0pi_Kpiomega_pipipi0, BtoDstpipi_D0pi_Kpi, BtoDpipi_Kpipi, BtoDsDsst_Kpi_KK, antiB0toDpipi0_Kpipi, antiB0toDsDsst_Kpi0, InclusiveLambda, BottomoniumEtabExclusive, BottomoniumUpsilon, InclusiveUpsilon, CharmoniumPsi, XToD0_D0ToHpJm, XToD0_D0ToNeutrals, DstToD0Pi_D0ToRare, XToDp_DpToKsHp, XToDp_DpToHpHmJp, LambdacTopHpJm, DstToD0Pi_D0ToGeneric, LambdacToSHpJm, XicpTopHpJm, XicToXimPipPim, Xic0ToLHpJm, XicpToLKsHp, DstToD0Pi_D0ToHpJm, DstToD0Pi_D0ToHpJmPi0, DstToD0Pi_D0ToKsOmega, DstToD0Pi_D0ToHpJmEta, DstToD0Pi_D0ToNeutrals, DstToD0Pi_D0ToHpJmKs, EarlyData_DstToD0Pi_D0ToHpJmPi0, EarlyData_DstToD0Pi_D0ToHpHmPi0, DstToDpPi0_DpToHpPi0, DpToHpPi0, DstToD0Pi_D0ToHpHmHpJm, DstToD0Pi_D0ToVGamma, DpToPipEpEm, DpToPipMupMum, DpToPipKpKm, DpToHpOmega, DspToHpOmega, DpToEtaHp, LambdacToGeneric, SinglePhotonDark, GammaGammaControlKLMDark, ALP3Gamma, EGammaControlDark, InelasticDarkMatter, RadBhabhaV0Control, TauLFV, DimuonPlusMissingEnergy, ElectronMuonPlusMissingEnergy, DielectronPlusMissingEnergy, LFVZpVisible, BtoKplusLLP, TauGeneric, TauThrust, TauKshort, TwoTrackLeptonsForLuminosity, LowMassTwoTrack, SingleTagPseudoScalar, InelasticDarkMatterWithDarkHiggs, AA2uuuu, DimuonPlusVisibleDarkHiggs, DielectronPlusVisibleDarkHiggs, DimuonRecoilMassSquared, LowMassOneTrack, DarkShower, BtoK_ALP2Gamma, TopologicalDarkPion, BtoPi0Pi0, BtoPi0Eta, BtoHadTracks, BtoHad1Pi0, BtoHad3Tracks1Pi0, BtoRhopRhom, BtoEtapKstp, BtoEtapRhop

Skim to run.

Named Arguments#

-o, --output-udst-name: Location of output uDST file.
-n, --max-input-events: Maximum number of input events to process.
-i, --input-file-list: Input file list
--data: Pass this flag if intending to run this skim on data, so that MC quantities are not saved in the output.
--analysis-globaltag: Analysis globaltag to be passed to the skims.
--pid-globaltag: PID globaltag to be passed to the skims.

combined#

Run several skims as a combined steering file.

b2skim-run combined [-h] [-n MaxInputEvents]
                    [-i InputFileList [InputFileList ...]] [--data]
                    [--analysis-globaltag AnalysisGlobaltag]
                    [--pid-globaltag PIDGlobaltag]
                    Skim [Skim ...]

Positional Arguments#

Skim

Possible choices: f_custom, f_SLME_p1, f_SLME_p2, f_SLME_p3, f_SLME_p4, f_EWP_p1, f_EWP_p2, f_EWP_p3, f_EWP_p4, f_TDCPV_p1, f_TDCPV_p2, f_TDCPV_p3, f_TDCPV_p4, f_bhadronic_p1, f_bhadronic_p2, f_bhadronic_p3, f_bhadronic_p4, f_quarkonium_p1, f_quarkonium_p2, f_quarkonium_p3, f_quarkonium_p4, f_charm_p1, f_charm_p2, f_charm_p3, f_charm_p4, f_dark_p1, f_dark_p2, f_dark_p3, f_dark_p4, f_tau_p1, f_tau_p2, f_tau_p3, f_tau_p4, Random, SystematicsTracking, Resonance, SystematicsRadMuMu, SystematicsEELL, SystematicsRadEE, SystematicsLambda, SystematicsPhiGamma, SystematicsFourLeptonFromHLTFlag, SystematicsRadMuMuFromHLTFlag, SystematicsJpsi, SystematicsKshort, SystematicsBhabha, SystematicsCombinedHadronic, SystematicsCombinedLowMulti, SystematicsDstar, PRsemileptonicUntagged, LeptonicUntagged, SLUntagged, B0toDstarl_Kpi_Kpipi0_Kpipipi, BtoDl_and_ROE_e_or_mu_or_lowmult, feiHadronicB0, feiHadronicBplus, feiSLB0, feiSLB0_RDstar, feiSLBplus, feiHadronic, feiHadronic_DstEllNu, feiSL, BtoXgamma, BtoXll, BtoXll_LFV, B0TwoBody, FourLepton, RadiativeDilepton, TDCPV_ccs, TDCPV_qqs, TDCPV_klong, TDCPV_dilepton, TDCPV_inclusiveJpsi, BtoD0h_Kspi0, BtoD0h_Kspipipi0, BtoDstarpipipi0_D0pi_Kpi, B0toDpi_Kpipi, B0toDpi_KpipiLooseDelE, B0toDpi_Kspi, B0toDstarPi_D0pi_Kpi, B0toDstarPi_D0pi_Kpipipi_Kpipi0, B0toDrho_Kpipi, B0toDrho_Kspi, B0toDstarRho_D0pi_Kpi, B0toDstarRho_D0pi_Kpipipi_Kpipi0, BptoD0etapi_Kpi, BptoD0pipi0_Kpi, BtoD0h_hh, BtoD0h_Kpi, B0toDstarpipi0_D0pi_Kpi, BtoD0h_Kpipipi_Kpipi0, B0toDstaretapi_D0pi_Kpi, BtoD0h_Kshh, BtoD0rho_Kpi, BtoD0rho_Kpipipi_Kpipi0, B0toDD_Kpipi_Kspi, B0toDstarD, B0toD0Kpipi0_pi0, B0toDs1D, B0toDDs0star, B0toDomegapi_Kpipi_pipipi0, B0toDomegapi_Kspi_pipipi0, BtoD0pi_Kpiomega_pipipi0, BtoDstpipi_D0pi_Kpi, BtoDpipi_Kpipi, BtoDsDsst_Kpi_KK, antiB0toDpipi0_Kpipi, antiB0toDsDsst_Kpi0, InclusiveLambda, BottomoniumEtabExclusive, BottomoniumUpsilon, InclusiveUpsilon, CharmoniumPsi, XToD0_D0ToHpJm, XToD0_D0ToNeutrals, DstToD0Pi_D0ToRare, XToDp_DpToKsHp, XToDp_DpToHpHmJp, LambdacTopHpJm, DstToD0Pi_D0ToGeneric, LambdacToSHpJm, XicpTopHpJm, XicToXimPipPim, Xic0ToLHpJm, XicpToLKsHp, DstToD0Pi_D0ToHpJm, DstToD0Pi_D0ToHpJmPi0, DstToD0Pi_D0ToKsOmega, DstToD0Pi_D0ToHpJmEta, DstToD0Pi_D0ToNeutrals, DstToD0Pi_D0ToHpJmKs, EarlyData_DstToD0Pi_D0ToHpJmPi0, EarlyData_DstToD0Pi_D0ToHpHmPi0, DstToDpPi0_DpToHpPi0, DpToHpPi0, DstToD0Pi_D0ToHpHmHpJm, DstToD0Pi_D0ToVGamma, DpToPipEpEm, DpToPipMupMum, DpToPipKpKm, DpToHpOmega, DspToHpOmega, DpToEtaHp, LambdacToGeneric, SinglePhotonDark, GammaGammaControlKLMDark, ALP3Gamma, EGammaControlDark, InelasticDarkMatter, RadBhabhaV0Control, TauLFV, DimuonPlusMissingEnergy, ElectronMuonPlusMissingEnergy, DielectronPlusMissingEnergy, LFVZpVisible, BtoKplusLLP, TauGeneric, TauThrust, TauKshort, TwoTrackLeptonsForLuminosity, LowMassTwoTrack, SingleTagPseudoScalar, InelasticDarkMatterWithDarkHiggs, AA2uuuu, DimuonPlusVisibleDarkHiggs, DielectronPlusVisibleDarkHiggs, DimuonRecoilMassSquared, LowMassOneTrack, DarkShower, BtoK_ALP2Gamma, TopologicalDarkPion, BtoPi0Pi0, BtoPi0Eta, BtoHadTracks, BtoHad1Pi0, BtoHad3Tracks1Pi0, BtoRhopRhom, BtoEtapKstp, BtoEtapRhop

List of skims to run as a combined skim.

Named Arguments#

-n, --max-input-events: Maximum number of input events to process.
-i, --input-file-list: Input file list
--data: Pass this flag if intending to run this skim on data, so that MC quantities are not saved in the output.
--analysis-globaltag: Analysis globaltag to be passed to the skims.
--pid-globaltag: PID globaltag to be passed to the skims.

flagged#

Run several skims as a flagged steering file.

b2skim-run flagged [-h] [--flaggedSkim flaggedSkim] [-n MaxInputEvents]
                   [-i InputFileList [InputFileList ...]] [--data]
                   [--analysis-globaltag AnalysisGlobaltag]
                   [--pid-globaltag PIDGlobaltag]
                   Skim [Skim ...]

Positional Arguments#

Skim

Possible choices: f_custom, f_SLME_p1, f_SLME_p2, f_SLME_p3, f_SLME_p4, f_EWP_p1, f_EWP_p2, f_EWP_p3, f_EWP_p4, f_TDCPV_p1, f_TDCPV_p2, f_TDCPV_p3, f_TDCPV_p4, f_bhadronic_p1, f_bhadronic_p2, f_bhadronic_p3, f_bhadronic_p4, f_quarkonium_p1, f_quarkonium_p2, f_quarkonium_p3, f_quarkonium_p4, f_charm_p1, f_charm_p2, f_charm_p3, f_charm_p4, f_dark_p1, f_dark_p2, f_dark_p3, f_dark_p4, f_tau_p1, f_tau_p2, f_tau_p3, f_tau_p4, Random, SystematicsTracking, Resonance, SystematicsRadMuMu, SystematicsEELL, SystematicsRadEE, SystematicsLambda, SystematicsPhiGamma, SystematicsFourLeptonFromHLTFlag, SystematicsRadMuMuFromHLTFlag, SystematicsJpsi, SystematicsKshort, SystematicsBhabha, SystematicsCombinedHadronic, SystematicsCombinedLowMulti, SystematicsDstar, PRsemileptonicUntagged, LeptonicUntagged, SLUntagged, B0toDstarl_Kpi_Kpipi0_Kpipipi, BtoDl_and_ROE_e_or_mu_or_lowmult, feiHadronicB0, feiHadronicBplus, feiSLB0, feiSLB0_RDstar, feiSLBplus, feiHadronic, feiHadronic_DstEllNu, feiSL, BtoXgamma, BtoXll, BtoXll_LFV, B0TwoBody, FourLepton, RadiativeDilepton, TDCPV_ccs, TDCPV_qqs, TDCPV_klong, TDCPV_dilepton, TDCPV_inclusiveJpsi, BtoD0h_Kspi0, BtoD0h_Kspipipi0, BtoDstarpipipi0_D0pi_Kpi, B0toDpi_Kpipi, B0toDpi_KpipiLooseDelE, B0toDpi_Kspi, B0toDstarPi_D0pi_Kpi, B0toDstarPi_D0pi_Kpipipi_Kpipi0, B0toDrho_Kpipi, B0toDrho_Kspi, B0toDstarRho_D0pi_Kpi, B0toDstarRho_D0pi_Kpipipi_Kpipi0, BptoD0etapi_Kpi, BptoD0pipi0_Kpi, BtoD0h_hh, BtoD0h_Kpi, B0toDstarpipi0_D0pi_Kpi, BtoD0h_Kpipipi_Kpipi0, B0toDstaretapi_D0pi_Kpi, BtoD0h_Kshh, BtoD0rho_Kpi, BtoD0rho_Kpipipi_Kpipi0, B0toDD_Kpipi_Kspi, B0toDstarD, B0toD0Kpipi0_pi0, B0toDs1D, B0toDDs0star, B0toDomegapi_Kpipi_pipipi0, B0toDomegapi_Kspi_pipipi0, BtoD0pi_Kpiomega_pipipi0, BtoDstpipi_D0pi_Kpi, BtoDpipi_Kpipi, BtoDsDsst_Kpi_KK, antiB0toDpipi0_Kpipi, antiB0toDsDsst_Kpi0, InclusiveLambda, BottomoniumEtabExclusive, BottomoniumUpsilon, InclusiveUpsilon, CharmoniumPsi, XToD0_D0ToHpJm, XToD0_D0ToNeutrals, DstToD0Pi_D0ToRare, XToDp_DpToKsHp, XToDp_DpToHpHmJp, LambdacTopHpJm, DstToD0Pi_D0ToGeneric, LambdacToSHpJm, XicpTopHpJm, XicToXimPipPim, Xic0ToLHpJm, XicpToLKsHp, DstToD0Pi_D0ToHpJm, DstToD0Pi_D0ToHpJmPi0, DstToD0Pi_D0ToKsOmega, DstToD0Pi_D0ToHpJmEta, DstToD0Pi_D0ToNeutrals, DstToD0Pi_D0ToHpJmKs, EarlyData_DstToD0Pi_D0ToHpJmPi0, EarlyData_DstToD0Pi_D0ToHpHmPi0, DstToDpPi0_DpToHpPi0, DpToHpPi0, DstToD0Pi_D0ToHpHmHpJm, DstToD0Pi_D0ToVGamma, DpToPipEpEm, DpToPipMupMum, DpToPipKpKm, DpToHpOmega, DspToHpOmega, DpToEtaHp, LambdacToGeneric, SinglePhotonDark, GammaGammaControlKLMDark, ALP3Gamma, EGammaControlDark, InelasticDarkMatter, RadBhabhaV0Control, TauLFV, DimuonPlusMissingEnergy, ElectronMuonPlusMissingEnergy, DielectronPlusMissingEnergy, LFVZpVisible, BtoKplusLLP, TauGeneric, TauThrust, TauKshort, TwoTrackLeptonsForLuminosity, LowMassTwoTrack, SingleTagPseudoScalar, InelasticDarkMatterWithDarkHiggs, AA2uuuu, DimuonPlusVisibleDarkHiggs, DielectronPlusVisibleDarkHiggs, DimuonRecoilMassSquared, LowMassOneTrack, DarkShower, BtoK_ALP2Gamma, TopologicalDarkPion, BtoPi0Pi0, BtoPi0Eta, BtoHadTracks, BtoHad1Pi0, BtoHad3Tracks1Pi0, BtoRhopRhom, BtoEtapKstp, BtoEtapRhop

List of skims to run as a flagged skim.

Named Arguments#

--flaggedSkim: Name of the flagged skim
-n, --max-input-events: Maximum number of input events to process.
-i, --input-file-list: Input file list
--data: Pass this flag if intending to run this skim on data, so that MC quantities are not saved in the output.
--analysis-globaltag: Analysis globaltag to be passed to the skims.
--pid-globaltag: PID globaltag to be passed to the skims.

module#

Run all skims in a module.

b2skim-run module [-h] [-n MaxInputEvents]
                  [-i InputFileList [InputFileList ...]] [--data]
                  [--analysis-globaltag AnalysisGlobaltag]
                  [--pid-globaltag PIDGlobaltag]
                  module

Positional Arguments#

module

Possible choices: fei, ewp, flagged, btocharmless, dark, lowMulti, leptonic, tdcpv, semileptonic, quarkonium, taupair, systematics, charm, btocharm

Skim module to run all skims for as combined steering file.

Named Arguments#

-n, --max-input-events: Maximum number of input events to process.
-i, --input-file-list: Input file list
--data: Pass this flag if intending to run this skim on data, so that MC quantities are not saved in the output.
--analysis-globaltag: Analysis globaltag to be passed to the skims.
--pid-globaltag: PID globaltag to be passed to the skims.

`b2skim-generate`: Generate skim steering files#

Tip

This tool is for cases where other tools does not suffice (such as running on the grid, or adding additional modules to the path after adding a skim.). If you just want to run a skim on KEKCC, consider using b2skim-run. If you want to test the performance of your skim, consider using the b2skim-stats tools.

Generate skim steering files.

This tool is for if you really need a steering file, and b2skim-run doesn’t cut it (such as if you are testing your skim on the grid).

usage: b2skim-generate [-h] [-o [OutputFilename]] [--data] [--no-stats]
                       [--skimmed-mdst-output] [--no-user-hints]
                       [--no-backward-compatibility]
                       [--local-module LOCAL_MODULE]
                       [--analysis-globaltag AnalysisGlobaltag]
                       [--udst-output-name] [--pid-globaltag PIDGlobaltag]
                       Skim|Module [Skim|Module ...]

Positional Arguments#

Skim|Module

Possible choices: f_custom, f_SLME_p1, f_SLME_p2, f_SLME_p3, f_SLME_p4, f_EWP_p1, f_EWP_p2, f_EWP_p3, f_EWP_p4, f_TDCPV_p1, f_TDCPV_p2, f_TDCPV_p3, f_TDCPV_p4, f_bhadronic_p1, f_bhadronic_p2, f_bhadronic_p3, f_bhadronic_p4, f_quarkonium_p1, f_quarkonium_p2, f_quarkonium_p3, f_quarkonium_p4, f_charm_p1, f_charm_p2, f_charm_p3, f_charm_p4, f_dark_p1, f_dark_p2, f_dark_p3, f_dark_p4, f_tau_p1, f_tau_p2, f_tau_p3, f_tau_p4, Random, SystematicsTracking, Resonance, SystematicsRadMuMu, SystematicsEELL, SystematicsRadEE, SystematicsLambda, SystematicsPhiGamma, SystematicsFourLeptonFromHLTFlag, SystematicsRadMuMuFromHLTFlag, SystematicsJpsi, SystematicsKshort, SystematicsBhabha, SystematicsCombinedHadronic, SystematicsCombinedLowMulti, SystematicsDstar, PRsemileptonicUntagged, LeptonicUntagged, SLUntagged, B0toDstarl_Kpi_Kpipi0_Kpipipi, BtoDl_and_ROE_e_or_mu_or_lowmult, feiHadronicB0, feiHadronicBplus, feiSLB0, feiSLB0_RDstar, feiSLBplus, feiHadronic, feiHadronic_DstEllNu, feiSL, BtoXgamma, BtoXll, BtoXll_LFV, B0TwoBody, FourLepton, RadiativeDilepton, TDCPV_ccs, TDCPV_qqs, TDCPV_klong, TDCPV_dilepton, TDCPV_inclusiveJpsi, BtoD0h_Kspi0, BtoD0h_Kspipipi0, BtoDstarpipipi0_D0pi_Kpi, B0toDpi_Kpipi, B0toDpi_KpipiLooseDelE, B0toDpi_Kspi, B0toDstarPi_D0pi_Kpi, B0toDstarPi_D0pi_Kpipipi_Kpipi0, B0toDrho_Kpipi, B0toDrho_Kspi, B0toDstarRho_D0pi_Kpi, B0toDstarRho_D0pi_Kpipipi_Kpipi0, BptoD0etapi_Kpi, BptoD0pipi0_Kpi, BtoD0h_hh, BtoD0h_Kpi, B0toDstarpipi0_D0pi_Kpi, BtoD0h_Kpipipi_Kpipi0, B0toDstaretapi_D0pi_Kpi, BtoD0h_Kshh, BtoD0rho_Kpi, BtoD0rho_Kpipipi_Kpipi0, B0toDD_Kpipi_Kspi, B0toDstarD, B0toD0Kpipi0_pi0, B0toDs1D, B0toDDs0star, B0toDomegapi_Kpipi_pipipi0, B0toDomegapi_Kspi_pipipi0, BtoD0pi_Kpiomega_pipipi0, BtoDstpipi_D0pi_Kpi, BtoDpipi_Kpipi, BtoDsDsst_Kpi_KK, antiB0toDpipi0_Kpipi, antiB0toDsDsst_Kpi0, InclusiveLambda, BottomoniumEtabExclusive, BottomoniumUpsilon, InclusiveUpsilon, CharmoniumPsi, XToD0_D0ToHpJm, XToD0_D0ToNeutrals, DstToD0Pi_D0ToRare, XToDp_DpToKsHp, XToDp_DpToHpHmJp, LambdacTopHpJm, DstToD0Pi_D0ToGeneric, LambdacToSHpJm, XicpTopHpJm, XicToXimPipPim, Xic0ToLHpJm, XicpToLKsHp, DstToD0Pi_D0ToHpJm, DstToD0Pi_D0ToHpJmPi0, DstToD0Pi_D0ToKsOmega, DstToD0Pi_D0ToHpJmEta, DstToD0Pi_D0ToNeutrals, DstToD0Pi_D0ToHpJmKs, EarlyData_DstToD0Pi_D0ToHpJmPi0, EarlyData_DstToD0Pi_D0ToHpHmPi0, DstToDpPi0_DpToHpPi0, DpToHpPi0, DstToD0Pi_D0ToHpHmHpJm, DstToD0Pi_D0ToVGamma, DpToPipEpEm, DpToPipMupMum, DpToPipKpKm, DpToHpOmega, DspToHpOmega, DpToEtaHp, LambdacToGeneric, SinglePhotonDark, GammaGammaControlKLMDark, ALP3Gamma, EGammaControlDark, InelasticDarkMatter, RadBhabhaV0Control, TauLFV, DimuonPlusMissingEnergy, ElectronMuonPlusMissingEnergy, DielectronPlusMissingEnergy, LFVZpVisible, BtoKplusLLP, TauGeneric, TauThrust, TauKshort, TwoTrackLeptonsForLuminosity, LowMassTwoTrack, SingleTagPseudoScalar, InelasticDarkMatterWithDarkHiggs, AA2uuuu, DimuonPlusVisibleDarkHiggs, DielectronPlusVisibleDarkHiggs, DimuonRecoilMassSquared, LowMassOneTrack, DarkShower, BtoK_ALP2Gamma, TopologicalDarkPion, BtoPi0Pi0, BtoPi0Eta, BtoHadTracks, BtoHad1Pi0, BtoHad3Tracks1Pi0, BtoRhopRhom, BtoEtapKstp, BtoEtapRhop, fei, ewp, flagged, btocharmless, dark, lowMulti, leptonic, tdcpv, semileptonic, quarkonium, taupair, systematics, charm, btocharm

Skim/s to produce a steering file for. If more than one skim is provided, then a combined steering file is produced. If a module name is passed, the combined steering file will contain all skims in that module.

Named Arguments#

-o, --output-script-name

Location to output steering file. If flag not given, code is printed to screen. If flag is given with no arguments, writes to a file in the current directory using a default name.

Default: ''

--data

Pass this flag if intending to run this skim on data, so that MC quantities are not saved in the output.

--no-stats

If flag passed, print(b2.statistics) will not be included at the end of the steering file.

--skimmed-mdst-output

If flag passed, save a single MDST containing events which pass at least one of the skims.

--no-user-hints

If flag passed, the steering file will not include a comment explaining how to add modules to the path after building the skim lists.

--no-backward-compatibility

If this flag is not passed, the steering file will include additional imports wrapped in a try-except block, in order to be work with both release 5 and 6.

--local-module

[EXPERT FLAG] Name of local module to import skim functions from. Script will fail if skims come from more than one module.

--analysis-globaltag

Analysis globaltag to be passed to the skims.

Default: ''

--udst-output-name

Name given to the output udst from skim script.

Default: ''

--pid-globaltag

PID globaltag to be passed to the skims.

Default: ''

`b2skim-generate-validation`: Generate skim validation scripts#

Generate skim validation scripts.

usage: b2skim-generate-validation [-h] (--skims SKIM [SKIM ...] | --all)
                                  [-o DIRECTORY] [--in-place]
                                  [--add-analysis-globaltag]

Named Arguments#

--skims

Possible choices: f_custom, f_SLME_p1, f_SLME_p2, f_SLME_p3, f_SLME_p4, f_EWP_p1, f_EWP_p2, f_EWP_p3, f_EWP_p4, f_TDCPV_p1, f_TDCPV_p2, f_TDCPV_p3, f_TDCPV_p4, f_bhadronic_p1, f_bhadronic_p2, f_bhadronic_p3, f_bhadronic_p4, f_quarkonium_p1, f_quarkonium_p2, f_quarkonium_p3, f_quarkonium_p4, f_charm_p1, f_charm_p2, f_charm_p3, f_charm_p4, f_dark_p1, f_dark_p2, f_dark_p3, f_dark_p4, f_tau_p1, f_tau_p2, f_tau_p3, f_tau_p4, Random, SystematicsTracking, Resonance, SystematicsRadMuMu, SystematicsEELL, SystematicsRadEE, SystematicsLambda, SystematicsPhiGamma, SystematicsFourLeptonFromHLTFlag, SystematicsRadMuMuFromHLTFlag, SystematicsJpsi, SystematicsKshort, SystematicsBhabha, SystematicsCombinedHadronic, SystematicsCombinedLowMulti, SystematicsDstar, PRsemileptonicUntagged, LeptonicUntagged, SLUntagged, B0toDstarl_Kpi_Kpipi0_Kpipipi, BtoDl_and_ROE_e_or_mu_or_lowmult, feiHadronicB0, feiHadronicBplus, feiSLB0, feiSLB0_RDstar, feiSLBplus, feiHadronic, feiHadronic_DstEllNu, feiSL, BtoXgamma, BtoXll, BtoXll_LFV, B0TwoBody, FourLepton, RadiativeDilepton, TDCPV_ccs, TDCPV_qqs, TDCPV_klong, TDCPV_dilepton, TDCPV_inclusiveJpsi, BtoD0h_Kspi0, BtoD0h_Kspipipi0, BtoDstarpipipi0_D0pi_Kpi, B0toDpi_Kpipi, B0toDpi_KpipiLooseDelE, B0toDpi_Kspi, B0toDstarPi_D0pi_Kpi, B0toDstarPi_D0pi_Kpipipi_Kpipi0, B0toDrho_Kpipi, B0toDrho_Kspi, B0toDstarRho_D0pi_Kpi, B0toDstarRho_D0pi_Kpipipi_Kpipi0, BptoD0etapi_Kpi, BptoD0pipi0_Kpi, BtoD0h_hh, BtoD0h_Kpi, B0toDstarpipi0_D0pi_Kpi, BtoD0h_Kpipipi_Kpipi0, B0toDstaretapi_D0pi_Kpi, BtoD0h_Kshh, BtoD0rho_Kpi, BtoD0rho_Kpipipi_Kpipi0, B0toDD_Kpipi_Kspi, B0toDstarD, B0toD0Kpipi0_pi0, B0toDs1D, B0toDDs0star, B0toDomegapi_Kpipi_pipipi0, B0toDomegapi_Kspi_pipipi0, BtoD0pi_Kpiomega_pipipi0, BtoDstpipi_D0pi_Kpi, BtoDpipi_Kpipi, BtoDsDsst_Kpi_KK, antiB0toDpipi0_Kpipi, antiB0toDsDsst_Kpi0, InclusiveLambda, BottomoniumEtabExclusive, BottomoniumUpsilon, InclusiveUpsilon, CharmoniumPsi, XToD0_D0ToHpJm, XToD0_D0ToNeutrals, DstToD0Pi_D0ToRare, XToDp_DpToKsHp, XToDp_DpToHpHmJp, LambdacTopHpJm, DstToD0Pi_D0ToGeneric, LambdacToSHpJm, XicpTopHpJm, XicToXimPipPim, Xic0ToLHpJm, XicpToLKsHp, DstToD0Pi_D0ToHpJm, DstToD0Pi_D0ToHpJmPi0, DstToD0Pi_D0ToKsOmega, DstToD0Pi_D0ToHpJmEta, DstToD0Pi_D0ToNeutrals, DstToD0Pi_D0ToHpJmKs, EarlyData_DstToD0Pi_D0ToHpJmPi0, EarlyData_DstToD0Pi_D0ToHpHmPi0, DstToDpPi0_DpToHpPi0, DpToHpPi0, DstToD0Pi_D0ToHpHmHpJm, DstToD0Pi_D0ToVGamma, DpToPipEpEm, DpToPipMupMum, DpToPipKpKm, DpToHpOmega, DspToHpOmega, DpToEtaHp, LambdacToGeneric, SinglePhotonDark, GammaGammaControlKLMDark, ALP3Gamma, EGammaControlDark, InelasticDarkMatter, RadBhabhaV0Control, TauLFV, DimuonPlusMissingEnergy, ElectronMuonPlusMissingEnergy, DielectronPlusMissingEnergy, LFVZpVisible, BtoKplusLLP, TauGeneric, TauThrust, TauKshort, TwoTrackLeptonsForLuminosity, LowMassTwoTrack, SingleTagPseudoScalar, InelasticDarkMatterWithDarkHiggs, AA2uuuu, DimuonPlusVisibleDarkHiggs, DielectronPlusVisibleDarkHiggs, DimuonRecoilMassSquared, LowMassOneTrack, DarkShower, BtoK_ALP2Gamma, TopologicalDarkPion, BtoPi0Pi0, BtoPi0Eta, BtoHadTracks, BtoHad1Pi0, BtoHad3Tracks1Pi0, BtoRhopRhom, BtoEtapKstp, BtoEtapRhop

Skims to produce a validation file for.

--all

Delete all existing validation scripts and reproduce validation scripts for all skims with a validation_histograms method defined. This option implies the --in-place flag.

-o, --output-directory

Directory to output steering file. Defaults to current working directory.

--in-place

Overwrite scripts in skim/validation/.

--add-analysis-globaltag

If flag passed, the default analysis globaltag will be passed to the skim constructor.

21.4.4. Skim registry#

All skims must be registered and encoded by the relevant skim liaison. Registering a skim is as simple as adding it to the list in skim/scripts/skim/registry.py as an entry of the form (SkimCode, ParentModule, SkimName).

The skim numbering convention is defined on the XWiki skim page.

skim.registry.Registry = <skim.registry.SkimRegistryClass object>#

An instance of skim.registry.SkimRegistryClass. Use this in your script to get information from the registry.

>>> from skim.registry import Registry
>>> Registry.encode_skim_name("SinglePhotonDark")
18020100

class skim.registry.SkimRegistryClass[source]#

Class containing information on all official registered skims. This class also contains helper functions for getting information from the registry. For convenience, an instance of this class is provided: skim.registry.Registry.

The table below lists all registered skims and their skim codes:

Module	Skim name	Skim code
btocharm	BtoD0h_Kspi0	14120300
	BtoD0h_Kspipipi0	14120400
	B0toDpi_Kpipi	14120600
	B0toDpi_Kspi	14120601
	B0toDpi_KpipiLooseDelE	14120602
	B0toDstarPi_D0pi_Kpi	14120700
	B0toDstarPi_D0pi_Kpipipi_Kpipi0	14120800
	B0toDrho_Kpipi	14121100
	B0toDrho_Kspi	14121101
	B0toDstarRho_D0pi_Kpi	14121200
	B0toDstarRho_D0pi_Kpipipi_Kpipi0	14121201
	B0toD0Kpipi0_pi0	14121300
	B0toDstarpipi0_D0pi_Kpi	14121400
	BtoDstpipi_D0pi_Kpi	14121401
	BtoDpipi_Kpipi	14121402
	BtoDsDsst_Kpi_KK	14121403
	B0toDstaretapi_D0pi_Kpi	14121500
	BptoD0etapi_Kpi	14121600
	BptoD0pipi0_Kpi	14121601
	antiB0toDpipi0_Kpipi	14123300
	BtoD0h_hh	14140100
	BtoD0h_Kpi	14140101
	BtoD0h_Kpipipi_Kpipi0	14140102
	BtoD0h_Kshh	14140200
	BtoD0rho_Kpi	14141000
	BtoD0rho_Kpipipi_Kpipi0	14141001
	B0toDD_Kpipi_Kspi	14141002
	B0toDstarD	14141003
	B0toDomegapi_Kpipi_pipipi0	14141701
	B0toDomegapi_Kspi_pipipi0	14141702
	BtoD0pi_Kpiomega_pipipi0	14141703
	B0toDs1D	14160200
	B0toDDs0star	14160201
	BtoDstarpipipi0_D0pi_Kpi	14161400
	antiB0toDsDsst_Kpi0	14163400
btocharmless	BtoPi0Pi0	19120100
	BtoRhopRhom	19120400
	BtoHadTracks	19130201
	BtoHad1Pi0	19130300
	BtoHad3Tracks1Pi0	19130310
	BtoPi0Eta	19130600
	BtoEtapRhop	19140200
	BtoEtapKstp	19140500
charm	DpToPipEpEm	17220100
	DpToPipMupMum	17220200
	DpToPipKpKm	17220300
	XToD0_D0ToHpJm	17230100
	XToD0_D0ToNeutrals	17230200
	DstToD0Pi_D0ToRare	17230300
	XToDp_DpToKsHp	17230400
	XToDp_DpToHpHmJp	17230500
	LambdacTopHpJm	17230600
	DstToD0Pi_D0ToGeneric	17230700
	LambdacToSHpJm	17230900
	XicpTopHpJm	17231000
	XicToXimPipPim	17231100
	Xic0ToLHpJm	17231200
	XicpToLKsHp	17231300
	DpToHpPi0	17232000
	DstToD0Pi_D0ToHpJm	17240100
	DstToD0Pi_D0ToHpJmPi0	17240200
	DstToD0Pi_D0ToKsOmega	17240400
	DstToD0Pi_D0ToHpJmEta	17240500
	DstToD0Pi_D0ToNeutrals	17240600
	DstToD0Pi_D0ToHpJmKs	17240700
	EarlyData_DstToD0Pi_D0ToHpJmPi0	17240800
	EarlyData_DstToD0Pi_D0ToHpHmPi0	17240900
	DstToDpPi0_DpToHpPi0	17241000
	DstToD0Pi_D0ToHpHmHpJm	17241100
	DstToD0Pi_D0ToVGamma	17241200
	DpToEtaHp	17241300
	LambdacToGeneric	17241400
	DpToHpOmega	17260100
	DspToHpOmega	17260200
dark	InelasticDarkMatter	18000000
	RadBhabhaV0Control	18000001
	SinglePhotonDark	18020100
	GammaGammaControlKLMDark	18020200
	ALP3Gamma	18020300
	EGammaControlDark	18020400
	InelasticDarkMatterWithDarkHiggs	18020500
	DimuonPlusVisibleDarkHiggs	18020600
	DielectronPlusVisibleDarkHiggs	18020700
	BtoK_ALP2Gamma	18020800
	TopologicalDarkPion	18020900
	DimuonRecoilMassSquared	18022400
	DarkShower	18022500
	BtoKplusLLP	18130100
	AA2uuuu	18370100
	DimuonPlusMissingEnergy	18520100
	ElectronMuonPlusMissingEnergy	18520200
	DielectronPlusMissingEnergy	18520300
	LFVZpVisible	18520400
ewp	B0TwoBody	12120400
	FourLepton	12120500
	RadiativeDilepton	12120600
	BtoXgamma	12160100
	BtoXll	12160200
	BtoXll_LFV	12160300
fei	feiHadronicB0	11180100
	feiHadronicBplus	11180200
	feiSLB0	11180300
	feiSLB0_RDstar	11180301
	feiSLBplus	11180400
	feiHadronic	11180500
	feiHadronic_DstEllNu	11180501
	feiSL	11180600
flagged	f_custom	70000000
	f_SLME_p1	71000100
	f_SLME_p2	71000200
	f_SLME_p3	71000300
	f_SLME_p4	71000400
	f_EWP_p1	72000100
	f_EWP_p2	72000200
	f_EWP_p3	72000300
	f_EWP_p4	72000400
	f_TDCPV_p1	73000100
	f_TDCPV_p2	73000200
	f_TDCPV_p3	73000300
	f_TDCPV_p4	73000400
	f_bhadronic_p1	74000100
	f_bhadronic_p2	74000200
	f_bhadronic_p3	74000300
	f_bhadronic_p4	74000400
	f_quarkonium_p1	75000100
	f_quarkonium_p2	75000200
	f_quarkonium_p3	75000300
	f_quarkonium_p4	75000400
	f_charm_p1	77000100
	f_charm_p2	77000200
	f_charm_p3	77000300
	f_charm_p4	77000400
	f_dark_p1	78000100
	f_dark_p2	78000200
	f_dark_p3	78000300
	f_dark_p4	78000400
	f_tau_p1	79000100
	f_tau_p2	79000200
	f_tau_p3	79000300
	f_tau_p4	79000400
leptonic	LeptonicUntagged	11130300
lowMulti	LowMassTwoTrack	18520500
	TwoTrackLeptonsForLuminosity	18530100
	SingleTagPseudoScalar	18530200
	LowMassOneTrack	18530600
quarkonium	InclusiveLambda	15410300
	BottomoniumEtabExclusive	15420100
	BottomoniumUpsilon	15440100
	InclusiveUpsilon	15460400
	CharmoniumPsi	16460200
semileptonic	PRsemileptonicUntagged	11110100
	SLUntagged	11160200
	B0toDstarl_Kpi_Kpipi0_Kpipipi	11160201
	BtoDl_and_ROE_e_or_mu_or_lowmult	11170100
systematics	Random	10000000
	SystematicsTracking	10600300
	Resonance	10600400
	SystematicsRadMuMu	10600500
	SystematicsEELL	10600600
	SystematicsRadEE	10600700
	SystematicsFourLeptonFromHLTFlag	10600800
	SystematicsRadMuMuFromHLTFlag	10600900
	SystematicsBhabha	10601200
	SystematicsCombinedHadronic	10601300
	SystematicsCombinedLowMulti	10601401
	SystematicsDstar	10601500
	SystematicsJpsi	10611000
	SystematicsKshort	10611100
	SystematicsLambda	10620200
	SystematicsPhiGamma	11640100
taupair	TauLFV	18360100
	TauGeneric	18570600
	TauThrust	18570700
	TauKshort	18570800
tdcpv	TDCPV_inclusiveJpsi	13110100
	TDCPV_dilepton	13130300
	TDCPV_ccs	13160200
	TDCPV_qqs	13160300
	TDCPV_klong	13160400

property codes#: A list of all registered skim codes.

decode_skim_code(SkimCode)[source]#

Find the name of the skim which corresponds to the provided skim code.

This is useful to determine the skim script used to produce a specific uDST file, given the 8-digit code name of the file itself.

Parameters:: SkimCode (str) – 8 digit skim code assigned to some skim.
Returns:: Name of the corresponding skim as it appears in the skim registry.

encode_skim_name(SkimName)[source]#

Find the 8 digit skim code assigned to the skim with the provided name.

Parameters:: SkimName (str) – Name of the corresponding skim as it appears in the skim registry.
Returns:: 8 digit skim code assigned to the given skim.

get_skim_function(SkimName)[source]#

Get the skim class constructor for the given skim.

This is achieved by importing the module listed alongside the skim name in the skim registry.

Parameters:: SkimName (str) – Name of the skim to be found.
Returns:: The class constructor for the given skim.

get_skim_module(SkimName)[source]#

Retrieve the skim module name from the registry which contains the given skim.

Parameters:: SkimName (str) – Name of the skim as it appears in the skim registry.
Returns:: The name of the skim module which contains the skim.

get_skims_in_module(SkimModule)[source]#

Retrieve a list of the skims listed in the registry as existing in the given skim module.

Parameters:: SkimModule (str) – The name of the module, e.g. btocharmless (not skim.btocharmless or btocharmless.py).
Returns:: The skims listed in the registry as belonging to SkimModule.

property modules#: A list of all registered skim modules.

property names#: A list of all registered skim names.

21.4.5. Testing skim performance#

When skims are developed, it is important to test the performance of the skim on a data and on a range of background MC samples. Two command-line tools are provided in the skim package to aid in this: b2skim-stats-submit and b2skim-stats-print. They are available in the PATH after setting up the basf2 environment after calling b2setup. The former submits a series of test jobs for a skim on data and MC samples, and the latter uses the output files of the jobs to calculate performance statistics for each sample including retention rate, CPU time, and uDST size per event. b2skim-stats-print also provides estimates for combined MC samples, where the statistics are weighted by the cross-section of each background process.

First run b2skim-stats-submit, which will submit small skim jobs on test files of MC and data using bsub. For example,

b2skim-stats-submit -s LeptonicUntagged SLUntagged

Monitor your jobs with bjobs -u USERNAME. Once all of the submitted jobs have completed successfully, then run b2skim-stats-print.

b2skim-stats-print -s LeptonicUntagged SLUntagged

This will read the output files of the test jobs, and produce tables of statistics in a variety of outputs.

By default, a subset of the statistics are printed to the screen.
If the -M flag is provided, a Markdown table will be written to SkimStats.md. This table is in a format that can be copied into the comment fields of merge requests (where GitLab will format the table nicely for you). Use this flag when asked to produce a table of stats in a merge request.
If the -C flag is provided, a text file SkimStats.txt is written, in which the statistics are formatted as XWiki markup tables. These tables can be copied directly onto a XWiki page by editing the page, selecting Insert from the toolbar, selecting Code Snippet from the drop-down menu, and then pasting the content of the text file into the markup editor which appears. XWiki will then format the tables and headings. The markup editor can also be accessed via ctrl-shift-D (cmd-shift-D).
If the -J flag is provided, then all statistics produced are printed to a JSON file SkimStats.json, indexed by skim, statistic, and sample label. This file contains extra metadata about when and how the tests were run. This file is to be used by grid production tools.

Tip

To test your own newly-developed skim, make sure you have followed all the instructions in writing-skims, particularly the instructions regarding the skim registry.

`b2skim-stats-submit`: Run skim scripts on test samples#

Note

Please run these skim tests on KEKCC, so that the estimates for CPU time are directly comparable to one another.

Submits test jobs for a given set of skims, and saves the output in a format to be read by b2skim-stats-print. One or more standalone or combined skim names must be provided.

usage: b2skim-stats-submit [-h]
                           (-s skim [skim ...] | -c YAMLFile [CombinedSkim ...])
                           [--custom-samples Filename [Filename ...] |
                           --sample-yaml Filename]
                           [--analysis-globaltag AnalysisGlobaltag]
                           [--pid-globaltag PIDGlobaltag]
                           [-n nEventsPerSample] [--dry-run]
                           [--mc-only | --data-only | --custom-only]
                           [--flagged]

Named Arguments#

-s, --single

Possible choices: all, f_custom, f_SLME_p1, f_SLME_p2, f_SLME_p3, f_SLME_p4, f_EWP_p1, f_EWP_p2, f_EWP_p3, f_EWP_p4, f_TDCPV_p1, f_TDCPV_p2, f_TDCPV_p3, f_TDCPV_p4, f_bhadronic_p1, f_bhadronic_p2, f_bhadronic_p3, f_bhadronic_p4, f_quarkonium_p1, f_quarkonium_p2, f_quarkonium_p3, f_quarkonium_p4, f_charm_p1, f_charm_p2, f_charm_p3, f_charm_p4, f_dark_p1, f_dark_p2, f_dark_p3, f_dark_p4, f_tau_p1, f_tau_p2, f_tau_p3, f_tau_p4, Random, SystematicsTracking, Resonance, SystematicsRadMuMu, SystematicsEELL, SystematicsRadEE, SystematicsLambda, SystematicsPhiGamma, SystematicsFourLeptonFromHLTFlag, SystematicsRadMuMuFromHLTFlag, SystematicsJpsi, SystematicsKshort, SystematicsBhabha, SystematicsCombinedHadronic, SystematicsCombinedLowMulti, SystematicsDstar, PRsemileptonicUntagged, LeptonicUntagged, SLUntagged, B0toDstarl_Kpi_Kpipi0_Kpipipi, BtoDl_and_ROE_e_or_mu_or_lowmult, feiHadronicB0, feiHadronicBplus, feiSLB0, feiSLB0_RDstar, feiSLBplus, feiHadronic, feiHadronic_DstEllNu, feiSL, BtoXgamma, BtoXll, BtoXll_LFV, B0TwoBody, FourLepton, RadiativeDilepton, TDCPV_ccs, TDCPV_qqs, TDCPV_klong, TDCPV_dilepton, TDCPV_inclusiveJpsi, BtoD0h_Kspi0, BtoD0h_Kspipipi0, BtoDstarpipipi0_D0pi_Kpi, B0toDpi_Kpipi, B0toDpi_KpipiLooseDelE, B0toDpi_Kspi, B0toDstarPi_D0pi_Kpi, B0toDstarPi_D0pi_Kpipipi_Kpipi0, B0toDrho_Kpipi, B0toDrho_Kspi, B0toDstarRho_D0pi_Kpi, B0toDstarRho_D0pi_Kpipipi_Kpipi0, BptoD0etapi_Kpi, BptoD0pipi0_Kpi, BtoD0h_hh, BtoD0h_Kpi, B0toDstarpipi0_D0pi_Kpi, BtoD0h_Kpipipi_Kpipi0, B0toDstaretapi_D0pi_Kpi, BtoD0h_Kshh, BtoD0rho_Kpi, BtoD0rho_Kpipipi_Kpipi0, B0toDD_Kpipi_Kspi, B0toDstarD, B0toD0Kpipi0_pi0, B0toDs1D, B0toDDs0star, B0toDomegapi_Kpipi_pipipi0, B0toDomegapi_Kspi_pipipi0, BtoD0pi_Kpiomega_pipipi0, BtoDstpipi_D0pi_Kpi, BtoDpipi_Kpipi, BtoDsDsst_Kpi_KK, antiB0toDpipi0_Kpipi, antiB0toDsDsst_Kpi0, InclusiveLambda, BottomoniumEtabExclusive, BottomoniumUpsilon, InclusiveUpsilon, CharmoniumPsi, XToD0_D0ToHpJm, XToD0_D0ToNeutrals, DstToD0Pi_D0ToRare, XToDp_DpToKsHp, XToDp_DpToHpHmJp, LambdacTopHpJm, DstToD0Pi_D0ToGeneric, LambdacToSHpJm, XicpTopHpJm, XicToXimPipPim, Xic0ToLHpJm, XicpToLKsHp, DstToD0Pi_D0ToHpJm, DstToD0Pi_D0ToHpJmPi0, DstToD0Pi_D0ToKsOmega, DstToD0Pi_D0ToHpJmEta, DstToD0Pi_D0ToNeutrals, DstToD0Pi_D0ToHpJmKs, EarlyData_DstToD0Pi_D0ToHpJmPi0, EarlyData_DstToD0Pi_D0ToHpHmPi0, DstToDpPi0_DpToHpPi0, DpToHpPi0, DstToD0Pi_D0ToHpHmHpJm, DstToD0Pi_D0ToVGamma, DpToPipEpEm, DpToPipMupMum, DpToPipKpKm, DpToHpOmega, DspToHpOmega, DpToEtaHp, LambdacToGeneric, SinglePhotonDark, GammaGammaControlKLMDark, ALP3Gamma, EGammaControlDark, InelasticDarkMatter, RadBhabhaV0Control, TauLFV, DimuonPlusMissingEnergy, ElectronMuonPlusMissingEnergy, DielectronPlusMissingEnergy, LFVZpVisible, BtoKplusLLP, TauGeneric, TauThrust, TauKshort, TwoTrackLeptonsForLuminosity, LowMassTwoTrack, SingleTagPseudoScalar, InelasticDarkMatterWithDarkHiggs, AA2uuuu, DimuonPlusVisibleDarkHiggs, DielectronPlusVisibleDarkHiggs, DimuonRecoilMassSquared, LowMassOneTrack, DarkShower, BtoK_ALP2Gamma, TopologicalDarkPion, BtoPi0Pi0, BtoPi0Eta, BtoHadTracks, BtoHad1Pi0, BtoHad3Tracks1Pi0, BtoRhopRhom, BtoEtapKstp, BtoEtapRhop

List of individual skims to run.

Default: []

-c, --combined

List of combined skims to run. This flag expects as its first argument the path to a YAML defining the combined skims. All remaining arguments are the combined skims to test. The YAML file is simply a mapping of combined skim names to the individual skims comprising them. For example, feiSL: [feiSLB0, feiSLBplus].

--custom-samples

Filenames of custom samples to test in addition to standard data and MC files.

--sample-yaml

YAML file containing a list of samples to test on. File must conform to the schema defined in skim/tools/resources/test_samples_schema.json (see examples in /group/belle2/dataprod/MC/SkimTraining/SampleLists). If argument not passed, defaults to /group/belle2/dataprod/MC/SkimTraining/SampleLists/TestFiles.yaml.

--analysis-globaltag

Analysis globaltag to be passed to the skims.

--pid-globaltag

PID globaltag to be passed to the skims.

-n

Number of events to run per sample. This input can be any positive number, but the actual number events run is limited to the size of the test files (~200,000 for MC files and ~20,000 for data files).

Default: 10000

--dry-run, --dry

Print the submission commands, but don’t run them.

--mc-only

Test on only MC samples.

--data-only

Test on only data samples.

--custom-only

Test on only custom samples.

--flagged

used flagged skim approach instead of combined

`b2skim-stats-print`: Print tables of performance statistics#

Reads the output files of test skim jobs from b2skim-stats-submit and prints tables of performance statistics. One or more single or combined skim names must be provided.

usage: b2skim-stats-print [-h]
                          (-s skim [skim ...] | -c CombinedSkim [CombinedSkim ...])
                          [-C [OutputFilename] | -M [OutputFilename] | -J
                          [OutputFilename]] [--mconly | --dataonly] [-v]
                          [-flagged]

Named Arguments#

-s, --single

Possible choices: all, f_custom, f_SLME_p1, f_SLME_p2, f_SLME_p3, f_SLME_p4, f_EWP_p1, f_EWP_p2, f_EWP_p3, f_EWP_p4, f_TDCPV_p1, f_TDCPV_p2, f_TDCPV_p3, f_TDCPV_p4, f_bhadronic_p1, f_bhadronic_p2, f_bhadronic_p3, f_bhadronic_p4, f_quarkonium_p1, f_quarkonium_p2, f_quarkonium_p3, f_quarkonium_p4, f_charm_p1, f_charm_p2, f_charm_p3, f_charm_p4, f_dark_p1, f_dark_p2, f_dark_p3, f_dark_p4, f_tau_p1, f_tau_p2, f_tau_p3, f_tau_p4, Random, SystematicsTracking, Resonance, SystematicsRadMuMu, SystematicsEELL, SystematicsRadEE, SystematicsLambda, SystematicsPhiGamma, SystematicsFourLeptonFromHLTFlag, SystematicsRadMuMuFromHLTFlag, SystematicsJpsi, SystematicsKshort, SystematicsBhabha, SystematicsCombinedHadronic, SystematicsCombinedLowMulti, SystematicsDstar, PRsemileptonicUntagged, LeptonicUntagged, SLUntagged, B0toDstarl_Kpi_Kpipi0_Kpipipi, BtoDl_and_ROE_e_or_mu_or_lowmult, feiHadronicB0, feiHadronicBplus, feiSLB0, feiSLB0_RDstar, feiSLBplus, feiHadronic, feiHadronic_DstEllNu, feiSL, BtoXgamma, BtoXll, BtoXll_LFV, B0TwoBody, FourLepton, RadiativeDilepton, TDCPV_ccs, TDCPV_qqs, TDCPV_klong, TDCPV_dilepton, TDCPV_inclusiveJpsi, BtoD0h_Kspi0, BtoD0h_Kspipipi0, BtoDstarpipipi0_D0pi_Kpi, B0toDpi_Kpipi, B0toDpi_KpipiLooseDelE, B0toDpi_Kspi, B0toDstarPi_D0pi_Kpi, B0toDstarPi_D0pi_Kpipipi_Kpipi0, B0toDrho_Kpipi, B0toDrho_Kspi, B0toDstarRho_D0pi_Kpi, B0toDstarRho_D0pi_Kpipipi_Kpipi0, BptoD0etapi_Kpi, BptoD0pipi0_Kpi, BtoD0h_hh, BtoD0h_Kpi, B0toDstarpipi0_D0pi_Kpi, BtoD0h_Kpipipi_Kpipi0, B0toDstaretapi_D0pi_Kpi, BtoD0h_Kshh, BtoD0rho_Kpi, BtoD0rho_Kpipipi_Kpipi0, B0toDD_Kpipi_Kspi, B0toDstarD, B0toD0Kpipi0_pi0, B0toDs1D, B0toDDs0star, B0toDomegapi_Kpipi_pipipi0, B0toDomegapi_Kspi_pipipi0, BtoD0pi_Kpiomega_pipipi0, BtoDstpipi_D0pi_Kpi, BtoDpipi_Kpipi, BtoDsDsst_Kpi_KK, antiB0toDpipi0_Kpipi, antiB0toDsDsst_Kpi0, InclusiveLambda, BottomoniumEtabExclusive, BottomoniumUpsilon, InclusiveUpsilon, CharmoniumPsi, XToD0_D0ToHpJm, XToD0_D0ToNeutrals, DstToD0Pi_D0ToRare, XToDp_DpToKsHp, XToDp_DpToHpHmJp, LambdacTopHpJm, DstToD0Pi_D0ToGeneric, LambdacToSHpJm, XicpTopHpJm, XicToXimPipPim, Xic0ToLHpJm, XicpToLKsHp, DstToD0Pi_D0ToHpJm, DstToD0Pi_D0ToHpJmPi0, DstToD0Pi_D0ToKsOmega, DstToD0Pi_D0ToHpJmEta, DstToD0Pi_D0ToNeutrals, DstToD0Pi_D0ToHpJmKs, EarlyData_DstToD0Pi_D0ToHpJmPi0, EarlyData_DstToD0Pi_D0ToHpHmPi0, DstToDpPi0_DpToHpPi0, DpToHpPi0, DstToD0Pi_D0ToHpHmHpJm, DstToD0Pi_D0ToVGamma, DpToPipEpEm, DpToPipMupMum, DpToPipKpKm, DpToHpOmega, DspToHpOmega, DpToEtaHp, LambdacToGeneric, SinglePhotonDark, GammaGammaControlKLMDark, ALP3Gamma, EGammaControlDark, InelasticDarkMatter, RadBhabhaV0Control, TauLFV, DimuonPlusMissingEnergy, ElectronMuonPlusMissingEnergy, DielectronPlusMissingEnergy, LFVZpVisible, BtoKplusLLP, TauGeneric, TauThrust, TauKshort, TwoTrackLeptonsForLuminosity, LowMassTwoTrack, SingleTagPseudoScalar, InelasticDarkMatterWithDarkHiggs, AA2uuuu, DimuonPlusVisibleDarkHiggs, DielectronPlusVisibleDarkHiggs, DimuonRecoilMassSquared, LowMassOneTrack, DarkShower, BtoK_ALP2Gamma, TopologicalDarkPion, BtoPi0Pi0, BtoPi0Eta, BtoHadTracks, BtoHad1Pi0, BtoHad3Tracks1Pi0, BtoRhopRhom, BtoEtapKstp, BtoEtapRhop

List of individual skims to run.

Default: []

-c, --combined

List of combined skims to run.

Default: []

-C, --confluence

Save a wiki markup table to be copied to Confluence.

-M, --markdown

Save a markdown table in a format that can be copied into merge request comments.

-J, --json

Save the tables of statistics to a JSON file.

--mconly

Test on only MC samples.

--dataonly

Test on only data samples.

-v, --verbose

Print out extra warning messages when the script cannot calculate a value, but moves on anyway.

-flagged, --flagged

run on flagged skim

Running `b2skim-stats` tools on custom samples#

By default, these tools will run over a standard list of samples defined in /group/belle2/dataprod/MC/SkimTraining/SampleLists/TestFiles.yaml. If you would like to run these tools over a set of custom samples (e.g. a signal MC sample) in addition to the standard list of files, then simply pass the filenames to b2skim-stats-submit:

b2skim-stats-submit -s SkimA SkimB SkimC --custom-samples /path/to/sample/*.root
# wait for jobs to finish...
b2skim-stats-print -s SkimA SkimB SkimC

Alternatively, you may create a YAML file specifying the list of samples you wish to run on:

Custom:
  - location: /path/to/sample/a.root
    label: "A nice human-readable label"
  - location: /path/to/sample/b.root
    label: "Another nice human-readable label"
  - location: /path/to/sample/c.root
    label: "Yet another nice human-readable label"

Then pass this YAML file to b2skim-stats-submit:

b2skim-stats-submit -s SkimA SkimB SkimC --sample-yaml MyCustomSamples.yaml
# wait for jobs to finish...
b2skim-stats-print -s SkimA SkimB SkimC

If you specify the samples by this second method, then only the samples listed in the YAML file will be tested on.

The JSON schema for the input YAML file is defined in skim/tools/resources/test_samples_schema.json.

21.4.6. Core skim package API#

The core classes of the skim package are defined in skim.core: BaseSkim and CombinedSkim.

BaseSkim is an abstract base class from which all skims inherit. It defines template functions for a skim, and includes attributes describing the skim metadata.
CombinedSkim is a class for combining BaseSkim objects into a single steering file.

class skim.core.BaseSkim(*, OutputFileName=None, additionalDataDescription=None, udstOutput=True, validation=False, mc=True, analysisGlobaltag=None, pidGlobaltag=None)[source]#

Base class for skims. Initialises a skim name, and creates template functions required for each skim.

See writing-skims for information on how to use this to define a new skim.

ApplyHLTHadronCut = False#: If this property is set to True, then the HLT selection for hlt_hadron will be applied to the skim lists when the skim is added to the path.

MergeDataStructures = {}#: Dict of str -> function pairs to determine if any special data structures should be merged when combining skims. Currently, this is only used to merge FEI config parameters when running multiple FEI skims at once, so that it can be run just once with all the necessary arguments.

NoisyModules = None#: List of module types to be silenced. This may be necessary in certain skims in order to keep log file sizes small.

Tip

The elements of this list should be the module type, which is not necessarily the same as the module name. The module type can be inspected in Python via module.type().

See also

This attribute is used by BaseSkim.set_skim_logging.

SkimLists = []#: List of particle lists reconstructed by the skim. This attribute should only be accessed after running the __call__ method.

property TestFiles#

Location of test MDST sample. To modify this, set the property BaseSkim.TestSampleProcess, and this function will find an appropriate test sample from the list in /group/belle2/dataprod/MC/SkimTraining/SampleLists/TestFiles.yaml

If no sample can be found, an empty list is returned.

TestSampleProcess = 'mixed'#: MC process of test file. BaseSkim.TestFiles passes this property to skim.utils.testfiles.get_test_file to retrieve an appropriate file location. Defaults to a $B^{0}\overline{B^{0}}$ sample.

additional_setup(path)[source]#

Perform any setup steps necessary before running the skim.

Warning

Standard particle lists should not be loaded in here. This should be done by overriding the method BaseSkim.load_standard_lists. This is crucial for avoiding loading lists twice when combining skims for production.

Parameters:: path (basf2.Path) – Skim path to be processed.

analysisGlobaltag = None#: Analysis globaltag.

apply_hlt_hadron_cut_if_required(path)[source]#

Apply the hlt_hadron selection if the property ApplyHLTHadronCut is True.

Parameters:: path (basf2.Path) – Skim path to be processed.

abstract build_lists(path)[source]#

Create the skim lists to be saved in the output uDST. This function is where the main skim cuts should be applied. This function should return a list of particle list names.

Parameters:: path (basf2.Path) – Skim path to be processed.

Changed in version release-06-00-00: Previously, this function was expected to set the attribute BaseSkim.SkimLists. Now this is handled by BaseSkim, and this function is expected to return the list of particle list names.

property code#: Eight-digit code assigned to this skim in the registry.

property flag#: Event-level variable indicating whether an event passes the skim or not. To use the skim flag without writing uDST output, use the argument udstOutput=False when instantiating the skim class.

initialise_skim_flag(path)[source]#: Add the module skim.utils.flags.InitialiseSkimFlag to the path, which initialises flag for this skim to zero.

load_standard_lists(path)[source]#

Load any standard lists. This code will be run before any BaseSkim.additional_setup and BaseSkim.build_lists.

Note

This is separated into its own function so that when skims are combined, any standard lists used by two skims can be loaded just once.

Parameters:: path (basf2.Path) – Skim path to be processed.

mc = True#: Include Monte Carlo quantities in skim output.

output_udst(path)[source]#

Write the skim particle lists to an output uDST and print a summary of the skim list statistics.

Parameters:: path (basf2.Path) – Skim path to be processed.

pidGlobaltag = None#: PID globaltag.

property postskim_path#

Return the skim path.

If BaseSkim.skim_event_cuts has been run, then the skim lists will only be created on a conditional path, so subsequent modules should be added to the conditional path.
If BaseSkim.skim_event_cuts has not been run, then the main analysis path is returned.

produce_on_tau_samples = True#

If this property is set to False, then b2skim-prod will not produce data production requests for this skim on taupair MC samples. This decision may be made for one of two reasons:

The retention rate of the skim on taupair samples is basically zero, so there is no point producing the skim for these samples.
The retention rate of the skim on taupair samples is too high (>20%), so the production system may struggle to handle the jobs.

produces_mdst_by_default = False#: Special property for combined systematics skims, which produce MDST output instead of uDST. This property is used by b2skim-prod to set the DataLevel parameter in the DataDescription block for this skim to mdst instead of udst.

set_skim_logging()[source]#

Turns the log level to ERROR for selected modules to decrease the total size of the skim log files. Additional modules can be silenced by setting the attribute NoisyModules for an individual skim.

Parameters:: path (basf2.Path) – Skim path to be processed.

Warning

This method works by inspecting the modules added to the path, and setting the log level to ERROR. This method should be called after all skim-related modules are added to the path.

skim_event_cuts(cut, *, path)[source]#

Apply event-level cuts in a skim-safe way.

Parameters:

cut (str) – Event-level cut to be applied.
path (basf2.Path) – Skim path to be processed.

Returns:

Path on which the rest of this skim should be processed. On this path, only events which passed the event-level cut will be processed further.

Tip

If running this function in BaseSkim.additional_setup or BaseSkim.build_lists, redefine the path to the path returned by BaseSkim.skim_event_cuts, e.g.

def build_lists(self, path):
    path = self.skim_event_cuts("nTracks>4", path=path)
    # rest of skim list building...

Note

The motivation for using this function over applyEventCuts is that applyEventCuts completely removes events from processing. If we combine multiple skims in a single steering file (which is done in production), and the first has a set of event-level cuts, then all the remaining skims will never even see those events.

Internally, this function creates a new path, which is only processed for events passing the event-level cut. To avoid issues around particles not being available on the main path (leading to noisy error logs), we need to add the rest of the skim to this path. So this new path is assigned to the attribute BaseSkim._ConditionalPath, and BaseSkim.__call__ will run all remaining methods on this path.

update_skim_flag(path)[source]#: Add the module skim.utils.flags.UpdateSkimFlag to the path, which updates flag for this skim.

Warning

If a conditional path has been created before this, then this function must run on the conditional path, since the skim lists are not guaranteed to exist for all events on the main path.

validation_histograms(path)[source]#

Create validation histograms for the skim.

Parameters:: path (basf2.Path) – Skim path to be processed.

validation_sample = None#: MDST sample to use for validation histograms. Must be a valid location of a validation dataset (see documentation for basf2.find_file).

class skim.core.CombinedSkim(*skims, NoisyModules=None, additionalDataDescription=None, udstOutput=None, mdstOutput=False, mdst_kwargs=None, CombinedSkimName='CombinedSkim', OutputFileName=None, mc=None, analysisGlobaltag=None, pidGlobaltag=None)[source]#

Class for creating combined skims which can be run using similar-looking methods to BaseSkim objects.

A steering file which combines skims can be as simple as the following:

import basf2 as b2
import modularAnalysis as ma
from skim.WGs.foo import OneSkim, TwoSkim, RedSkim, BlueSkim

path = b2.Path()
ma.inputMdstList([], path=path)
skims = CombinedSkim(OneSkim(), TwoSkim(), RedSkim(), BlueSkim())
skims(path)  # load standard lists, create skim lists, and save to uDST
path.process()

When skims are combined using this class, the BaseSkim.NoisyModules lists of each skim are combined and all silenced.

The heavy-lifting functions BaseSkim.additional_setup, BaseSkim.build_lists and BaseSkim.output_udst are modified to loop over the corresponding functions of each individual skim. The load_standard_lists method is also modified to load all required lists, without accidentally loading a list twice.

Calling an instance of the CombinedSkim class will load all the required particle lists, then run all the setup steps, then the list building functions, and then all the output steps.

property TestFiles#

Location of test MDST sample. To modify this, set the property BaseSkim.TestSampleProcess, and this function will find an appropriate test sample from the list in /group/belle2/dataprod/MC/SkimTraining/SampleLists/TestFiles.yaml

If no sample can be found, an empty list is returned.

additional_setup(path)[source]#

Run the BaseSkim.additional_setup function of each skim.

Parameters:: path (basf2.Path) – Skim path to be processed.

apply_hlt_hadron_cut_if_required(path)[source]#

Run the BaseSkim.apply_hlt_hadron_cut_if_required function for each skim.

Parameters:: path (basf2.Path) – Skim path to be processed.

build_lists(path)[source]#

Run the BaseSkim.build_lists function of each skim.

Parameters:: path (basf2.Path) – Skim path to be processed.

property flag#: Event-level variable indicating whether an event passes the combinedSkim or not.

property flags#: List of flags for each skim in combined skim.

initialise_skim_flag(path)[source]#: Add the module skim.utils.flags.InitialiseSkimFlag to the path, to initialise flags for each skim.

load_standard_lists(path)[source]#

Add all required standard list loading to the path.

Note

To avoid loading standard lists twice, this function creates dummy paths that are passed through load_standard_lists for each skim. These dummy paths are then inspected, and a list of unique module-parameter combinations is added to the main skim path.

Parameters:: path (basf2.Path) – Skim path to be processed.

merge_data_structures()[source]#

Read the values of BaseSkim.MergeDataStructures and merge data structures accordingly.

For example, if MergeDataStructures has the value {"FEIChannelArgs": _merge_boolean_dicts.__func__}, then _merge_boolean_dicts is run on all input skims with the attribute FEIChannelArgs, and the value of FEIChannelArgs for that skim is set to the result.

In the FEI skims, this is used to merge configs which are passed to a cached function, thus allowing us to apply the FEI once with all the required particles available.

output_mdst_if_any_flag_passes(*, path, **kwargs)[source]#

Add MDST output to the path if the event passes any of the skim flags. EventExtraInfo is included in the MDST output so that the flags are available in the output.

The CombinedSkimName parameter in the CombinedSkim initialisation is used for the output filename if filename is not included in kwargs.

Parameters:

path (basf2.Path) – Skim path to be processed.
**kwargs – Passed on to mdst.add_mdst_output.

output_udst(path)[source]#

Run the BaseSkim.output_udst function of each skim.

Parameters:: path (basf2.Path) – Skim path to be processed.

property produce_on_tau_samples#

Corresponding value of this attribute for each individual skim.

A warning is issued if the individual skims in combined skim contain a mix of True and False for this property.

set_skim_logging()[source]#: Run BaseSkim.set_skim_logging for each skim.

update_skim_flag(path)[source]#: Add the module skim.utils.flags.UpdateSkimFlag to the conditional path of each skims.

21.4.7. Utility functions for skim experts#

Skim flag implementation#

Modules required for calculating skim flags. Skim flags track whether an event passes a skim, without the need to directly remove those events from processing.

class skim.utils.flags.InitialiseSkimFlag(*skims)[source]#

[Module for skim expert usage] Create the EventExtraInfo DataStore object, and set all required flag variables to zero.

Note

Add this module to the path before adding any skims, so that the skim flags are defined in the datastore for all events.

event()[source]#: Initialise flags to zero.

initialize()[source]#: Make sure that EventExtraInfo is present in datastore

class skim.utils.flags.UpdateSkimFlag(skim)[source]#

[Module for skim expert usage] Update the skim flag to be 1 if there is at least one candidate in any of the skim lists.

Note

Add this module to the post-skim path of each skim in the combined skim, as the skim lists are only guaranteed to exist on the conditional path (if a conditional path was used).

event()[source]#: Check if at least one skim list is non-empty; if so, update the skim flag to 1.

initialize()[source]#: Check EventExtraInfo and all the necessary ParticleLists have been registered previously. The registration of EventExtraInfo should be done by InitialiseSkimFlag.

Per-cut retention checker#

Provides class for tracking retention rate of each cut in a skim.

class skim.utils.retention.RetentionCheck(module_name='', module_number=0, particle_lists=None)[source]#

Check the retention rate and the number of candidates for a given set of particle lists.

The module stores its results in the static variable “summary”.

To monitor the effect of every module of an initial path, this module should be added after each module of the path. A function was written (skim.utils.retention.pathWithRetentionCheck) to do it:

>>> path = pathWithRetentionCheck(particle_lists, path)

After the path processing, the result of the RetentionCheck can be printed with

>>> RetentionCheck.print_results()

or plotted with (check the corresponding documentation)

>>> RetentionCheck.plot_retention(...)

and the summary dictionary can be accessed through

>>> RetentionCheck.summary

Authors:

Cyrille Praz, Slavomira Stefkova

Parameters:

module_name (str) – name of the module after which the retention rate is measured
module_number (int) – index of the module after which the retention rate is measured
particle_lists (list(str)) – list of particle list names which will be tracked by the module

event()[source]#

output_override = None#

classmethod plot_retention(particle_list, plot_title='', save_as=None, module_name_max_length=80)[source]#

Plot the result of the RetentionCheck for a given particle list.

Example of use (to be put after process(path)):

>>> RetentionCheck.plot_retention('B+:semileptonic','skim:feiSLBplus','retention_plots/plot.pdf')

Parameters:

particle_list (str) – particle list name
title (str) – plot title (overwritten by the -o argument in basf2)
save_as (str) – output filename (overwritten by the -o argument in basf2)
module_name_max_length (int) – if the module name length is higher than this value, do not display the full name

classmethod print_results()[source]#: Print the results, should be called after the path processing.

summary = {}#

terminate()[source]#

skim.utils.retention.pathWithRetentionCheck(particle_lists, path)[source]#

Return a new path with the module RetentionCheck inserted between each module of a given path.

This allows for checking how the retention rate is modified by each module of the path.

Example of use (to be put just before process(path)):

>>> path = pathWithRetentionCheck(['B+:semileptonic'], path)

Warning: pathWithRetentionCheck([‘B+:semileptonic’], path) does not modify path, it only returns a new one.

After the path processing, the result of the RetentionCheck can be printed with

>>> RetentionCheck.print_results()

or plotted with (check the corresponding documentation)

>>> RetentionCheck.plot_retention(...)

and the summary dictionary can be accessed through

>>> RetentionCheck.summary

Parameters:

particle_lists (list(str)) – list of particle list names which will be tracked by RetentionCheck
path (basf2.Path) – initial path (it is not modified, see warning above and example of use)

Skim samples framework#

Tip

This section is probably only of interest to you if you are developing the b2skim tools. The classes defined here are used internally by these tools to parse YAML files and handle sample metadata internally.

class skim.utils.testfiles.CustomSample(*, location, label=None, **kwargs)[source]#

property as_dict#: Sample serialised as a dictionary.

property encodeable_name#

Identifying string which is safe to be included as a filename component or as a key in the skim stats JSON file.

As a rough naming convention, data samples should start with ‘Data-’, MC sample with ‘MC-’, and custom samples with ‘Custom-‘.

property printable_name#: Human-readable name for displaying in printed tables.

class skim.utils.testfiles.DataSample(*, location, processing, experiment, beam_energy='4S', general_skim='all', **kwargs)[source]#

property as_dict#: Sample serialised as a dictionary.

property encodeable_name#

Identifying string which is safe to be included as a filename component or as a key in the skim stats JSON file.

As a rough naming convention, data samples should start with ‘Data-’, MC sample with ‘MC-’, and custom samples with ‘Custom-‘.

property printable_name#: Human-readable name for displaying in printed tables.

class skim.utils.testfiles.MCSample(*, location, process, campaign, beam_energy='4S', beam_background='BGx1', **kwargs)[source]#

property as_dict#: Sample serialised as a dictionary.

property encodeable_name#

Identifying string which is safe to be included as a filename component or as a key in the skim stats JSON file.

As a rough naming convention, data samples should start with ‘Data-’, MC sample with ‘MC-’, and custom samples with ‘Custom-‘.

property printable_name#: Human-readable name for displaying in printed tables.

class skim.utils.testfiles.Sample(**kwargs)[source]#

Base class for skim test samples.

property as_dict#: Sample serialised as a dictionary.

property encodeable_name#

Identifying string which is safe to be included as a filename component or as a key in the skim stats JSON file.

As a rough naming convention, data samples should start with ‘Data-’, MC sample with ‘MC-’, and custom samples with ‘Custom-‘.

location = NotImplemented#: Path of the test file.

property printable_name#: Human-readable name for displaying in printed tables.

static resolve_path(location)[source]#

Replace '${SampleDirectory}' with Sample.SampleDirectory, and resolve the path.

Parameters:: location (str, pathlib.Path) – Filename to be resolved.
Returns:: Resolved path.
Return type:: pathlib.Path

class skim.utils.testfiles.TestSampleList(*, SampleYAML=None, SampleDict=None, SampleList=None)[source]#

Container class for lists of MC, data, and custom samples.

DefaultSampleYAML = '/group/belle2/dataprod/MC/SkimTraining/SampleLists/TestFiles.yaml'#

property SampleDict#

query_data_samples(*, processing=None, experiment=None, beam_energy=None, general_skim=None, exact_match=False, inplace=False)[source]#

Find all MC samples matching query.

Parameters:

processing (str) – Data processing campaign number to query.
experiment (str, int) – Experiment number to query.
beam_energy (str) – Beam energy to query.
general_skim (str) – GeneralSkimName to query.
exact_match (bool) – If passed, an error is raised if there is not exactly one matching sample. If there is exactly one matching sample, then the single sample is returned, rather than a list.
inplace (bool) – Replace MC samples with the list obtained from query.

query_mc_samples(*, process=None, campaign=None, beam_energy=None, beam_background=None, exact_match=False, inplace=False)[source]#

Find all MC samples matching query.

Parameters:

process (str) – Simulated MC process to query.
campaign (str, int) – MC campaign number to query.
beam_energy (str) – Beam energy to query.
beam_background (str, int) – Nominal beam background to query.
exact_match (bool) – If passed, an error is raised if there is not exactly one matching sample. If there is exactly one matching sample, then the single sample is returned, rather than a list.
inplace (bool) – Replace MC samples with the list obtained from query.

validate_schema(SampleDict, InputYAML=None)[source]#: Validate YAML input against JSON schema defined in skim/tools/resources/test_samples_schema.json.

skim.utils.testfiles.get_test_file(process, *, SampleYAML=None)[source]#

Attempt to find a test sample of the given MC process.

Parameters:

process (str) – Physics process, e.g. mixed, charged, ccbar, eemumu.
SampleYAML (str, pathlib.Path) – Path to a YAML file containing sample specifications.

Returns:

Path to test sample file.

Return type:

str

Raises:

FileNotFoundError – Raised if no sample can be found.

Miscellaneous utility functions#

Miscellaneous utility functions for skim experts.

skim.utils.misc.dry_run_steering_file(SteeringFile)[source]#: Check if the steering file at the given path can be run with the “–dry-run” option.

skim.utils.misc.fancy_skim_header(SkimClass)[source]#

Decorator to generate a fancy header to skim documentation and prepend it to the docstring. Add this just above the definition of a skim.

Also ensures the documentation of the template functions like BaseSkim.build_lists is not repeated in every skim documentation.

@fancy_skim_header
class MySkimName(BaseSkim):
    # docstring here describing your skim, and explaining cuts.

skim.utils.misc.get_eventN(filename)[source]#

Retrieve the number of events in a file using b2file-metadata-show.

Parameters:: filename (str) – File to get number of events from.
Returns:: Number of events in the file.
Return type:: int

skim.utils.misc.get_file_metadata(filename)[source]#

Retrieve the metadata for a file using b2file-metadata-show.

Parameters:: metadata (str) – File to get number of events from.
Returns:: Metadata of file in dict format.
Return type:: dict

skim.utils.misc.resolve_skim_modules(SkimsOrModules, *, LocalModule=None)[source]#

Produce an ordered list of skims, by expanding any Python skim module names into a list of skims in that module. Also produce a dict of skims grouped by Python module.

Raises:

RuntimeError – Raised if a skim is listed twice.
ValueError – Raised if LocalModule is passed and skims are normally expected from more than one module.

21.4.8. `b2skim-prod`: Produce grid production requests#

Note

This tool is intended for use by skim production managers, not by skim liaisons.

%(prog)s is a tool for producing grid production requests in the format required by the production system, and also generating combined steering files.

YAML files are used by this tool to define the LPNs of datasets. Below are examples of valid YAML entries for data and MCri. The tool lpns2yaml.py is provided to create these YAML files from a list of LPNs.

## Example of a YAML file for data:
proc9_exp3r1:
    sampleLabel: proc9_exp3  # This label must match a skim sample in TestFiles.yaml
    LPNPrefix: /belle/Data
    inputReleaseNumber: release-03-02-02
    prodNumber: prod00008530
    inputDBGlobalTag: DB00000654
    procNumber: proc9
    experimentNumber: e0003
    beamEnergy: 4S
    inputDataLevel: mdst
    runNumbers:
        - r02724
        - r02801
        - r02802

proc9_exp3r2:
    sampleLabel: proc9_exp3
    LPNPrefix: /belle/Data
    inputReleaseNumber: release-03-02-02
    # prodNumber, inputDBGlobalTag, experimentNumber, and runNumbers can be integers
    prodNumber: 8530
    inputDBGlobalTag: 654
    procNumber: proc9
    experimentNumber: 3
    beamEnergy: 4S
    inputDataLevel: mdst
    runNumbers:
        - 3237
        - 3238
        - 3239


## Example of a YAML file for MCri:
MC12b_mixed:
    sampleLabel: MC12_mixedBGx1
    LPNPrefix: /belle/MC
    inputReleaseNumber: release-03-01-00
    inputDBGlobalTag: DB00000547
    mcCampaign: MC12b
    prodNumber: prod00007392
    experimentNumber: s00/e1003
    beamEnergy: 4S
    mcType: mixed
    mcBackground: BGx1
    inputDataLevel: mdst
    runNumbers: r00000

MC12b_charged:
    sampleLabel: MC12_chargedBGx1
    LPNPrefix: /belle/MC
    inputReleaseNumber: release-03-01-00
    # inputDBGlobalTag, prodNumber, and runNumber can be integers
    inputDBGlobalTag: 547
    mcCampaign: MC12b
    prodNumber:
        - 7799  # prodNumber can be a list
        - 7802
    experimentNumber: s00/e1003
    beamEnergy: 4S
    mcType: charged
    mcBackground: BGx1
    inputDataLevel: mdst
    runNumbers: 0

To produce JSON files for a list of combined skims, pass this tool the YAML file and the names of the skims. The other required arguments include the skim campaign, intended release to be used, and base directory of the repository to output the JSON files in.

This tool is designed to work with the SkimStats.json output of b2skim-stats-print (see Testing skim performance). The YAML files can be used to specify which sample statistics are to be used for each dataset, with the keyword sampleLabel—this must match one of the sample labels used by the skim statistics tools. SkimStats.json must be present in the current directory when this tool is run.

Production requests cannot be produced without resource usage estimates, so the pipeline for producing a production request and combined steering file is as follows:

Put together a YAML file defining which single skims comprise each combined skim. For example,

# contents of CombinedSkims.yaml
EWP:
  - BtoXll
  - BtoXll_LFV
  - BtoXgamma
Tau:
  - TauLFV
  - TauGeneric
  - TauThrust

Pass this combined skim definition to b2skim-stats-submit, and produce JSON output of b2skim-stats-print

$ b2skim-stats-submit -c CombinedSkims.yaml EWP Tau
# wait for LSF jobs to complete...
$ b2skim-stats-print -c EWP Tau -J

The output SkimStats.json can then be used to produce production JSON files for the EWP and Tau combined skims, and will construct a steering files for the specified combined skims.

usage: b2skim-prod [-h] -s CombinedSkim [CombinedSkim ...] -o
                   OUTPUT_BASE_DIRECTORY -c CAMPAIGN -r RELEASE
                   [-l LOCAL_SKIM_SCRIPT]
                   [--analysis-globaltag AnalysisGlobaltag]
                   [--pid-globaltag PIDGlobaltag] [-N LPNS_PER_JSON]
                   [-b STARTINGBATCHNUMBER] [-flagged]
                   (--mcri | --mcrd | --data)
                   sampleRegistryYaml SkimStatsJson

Positional Arguments#

sampleRegistryYaml: YAML file defining the samples produce JSON files for.
SkimStatsJson: The JSON output file of b2skim-stats-print.

Named Arguments#

-s, --skims

List of skims to produce request files for.

-o, --output-base-directory

Base directory for output. This should be the base directory of the B2P/MC or B2P/data repo.

-c, --campaign

Name of the campaign, e.g. SKIMDATAx1.

-r, --release

The basf2 to release to be used, e.g. release-04-00-03.

-l, --local-skim-script

File name of the local skim script to use, if any. e.g. ewp_local.py. Should not include any path before the file name.

--analysis-globaltag

Analysis globaltag to be passed to the skims.

Default: ''

--pid-globaltag

PID globaltag to be passed to the skims.

Default: ''

-N, --lpns-per-json

Restrict number of LPNs in each JSON file to given number.

-b, --starting-batch-number

Starting number to count from for batch label appended to prod names.

Default: 1

-flagged, --flagged

if added use flagged skim

--mcri, --MCri

Produce JSON files for run-independent MC.

--mcrd, --MCrd

Produce JSON files for run-dependent MC.

--data, --Data

Produce JSON files for data.

Example usage

Produce requests for EWP and feiSLCombined skims on proc9:

$ %(prog)s Registry_proc9.yaml SkimStats.json -s EWP feiSLCombined --data -c SKIMDATAx1 -r release-04-01-01 -o B2P/data/

Produce requests for EWP on MC13, with one LPN per JSON file:

$ %(prog)s Registry_MC13.yaml SkimStats.json -N 1 -s EWP --data -c SKIMDATAx1 -r release-04-01-01 -o B2P/data/

Produce requests for EWP on MC13, using local skim module script:

$ %(prog)s Registry_MC13.yaml SkimStats.json -N 1 -l ewp_local.py -s EWP --data -c SKIMDATAx1 -r release-04-01-01 -o B2P/data/

21.4.9. `b2skim-stats-total`: Produce summary statistics for skim package#

Tool for producing summary statistics of skims for the distributed computing group. The expected input is the JSON output of :ref`b2skim-stats-print<b2skim-stats-print>`.

The values produced by the script are aggregated over all skims (either averaged or summed, depending on the flag passed by the user). For MC samples, this aggregate is printed per-sample. For data, the values are first aggregated over all skims per test data file, and then those values are averaged and are attached an uncertainty given by the standard deviation of the individual aggregated values. This is done to account for the wide variation in skim performance when tested on data samples from different runs.

usage: b2skim-stats-total [-h] [-j STATSJSON] [-C | -M]
                          (-r SKIM [SKIM ...] | -f REQUESTED_SKIMS_FILE)
                          (-a | -t | -b)

Named Arguments#

-j, --stats-json

JSON file of stats produced by b2skim-stats-print.

-C, --confluence

If passed, print tables in Confluence-friendly format.

-M, --markdown

If passed, print tables in Markdown format.

-r, --requested-skims

Possible choices: f_custom, f_SLME_p1, f_SLME_p2, f_SLME_p3, f_SLME_p4, f_EWP_p1, f_EWP_p2, f_EWP_p3, f_EWP_p4, f_TDCPV_p1, f_TDCPV_p2, f_TDCPV_p3, f_TDCPV_p4, f_bhadronic_p1, f_bhadronic_p2, f_bhadronic_p3, f_bhadronic_p4, f_quarkonium_p1, f_quarkonium_p2, f_quarkonium_p3, f_quarkonium_p4, f_charm_p1, f_charm_p2, f_charm_p3, f_charm_p4, f_dark_p1, f_dark_p2, f_dark_p3, f_dark_p4, f_tau_p1, f_tau_p2, f_tau_p3, f_tau_p4, Random, SystematicsTracking, Resonance, SystematicsRadMuMu, SystematicsEELL, SystematicsRadEE, SystematicsLambda, SystematicsPhiGamma, SystematicsFourLeptonFromHLTFlag, SystematicsRadMuMuFromHLTFlag, SystematicsJpsi, SystematicsKshort, SystematicsBhabha, SystematicsCombinedHadronic, SystematicsCombinedLowMulti, SystematicsDstar, PRsemileptonicUntagged, LeptonicUntagged, SLUntagged, B0toDstarl_Kpi_Kpipi0_Kpipipi, BtoDl_and_ROE_e_or_mu_or_lowmult, feiHadronicB0, feiHadronicBplus, feiSLB0, feiSLB0_RDstar, feiSLBplus, feiHadronic, feiHadronic_DstEllNu, feiSL, BtoXgamma, BtoXll, BtoXll_LFV, B0TwoBody, FourLepton, RadiativeDilepton, TDCPV_ccs, TDCPV_qqs, TDCPV_klong, TDCPV_dilepton, TDCPV_inclusiveJpsi, BtoD0h_Kspi0, BtoD0h_Kspipipi0, BtoDstarpipipi0_D0pi_Kpi, B0toDpi_Kpipi, B0toDpi_KpipiLooseDelE, B0toDpi_Kspi, B0toDstarPi_D0pi_Kpi, B0toDstarPi_D0pi_Kpipipi_Kpipi0, B0toDrho_Kpipi, B0toDrho_Kspi, B0toDstarRho_D0pi_Kpi, B0toDstarRho_D0pi_Kpipipi_Kpipi0, BptoD0etapi_Kpi, BptoD0pipi0_Kpi, BtoD0h_hh, BtoD0h_Kpi, B0toDstarpipi0_D0pi_Kpi, BtoD0h_Kpipipi_Kpipi0, B0toDstaretapi_D0pi_Kpi, BtoD0h_Kshh, BtoD0rho_Kpi, BtoD0rho_Kpipipi_Kpipi0, B0toDD_Kpipi_Kspi, B0toDstarD, B0toD0Kpipi0_pi0, B0toDs1D, B0toDDs0star, B0toDomegapi_Kpipi_pipipi0, B0toDomegapi_Kspi_pipipi0, BtoD0pi_Kpiomega_pipipi0, BtoDstpipi_D0pi_Kpi, BtoDpipi_Kpipi, BtoDsDsst_Kpi_KK, antiB0toDpipi0_Kpipi, antiB0toDsDsst_Kpi0, InclusiveLambda, BottomoniumEtabExclusive, BottomoniumUpsilon, InclusiveUpsilon, CharmoniumPsi, XToD0_D0ToHpJm, XToD0_D0ToNeutrals, DstToD0Pi_D0ToRare, XToDp_DpToKsHp, XToDp_DpToHpHmJp, LambdacTopHpJm, DstToD0Pi_D0ToGeneric, LambdacToSHpJm, XicpTopHpJm, XicToXimPipPim, Xic0ToLHpJm, XicpToLKsHp, DstToD0Pi_D0ToHpJm, DstToD0Pi_D0ToHpJmPi0, DstToD0Pi_D0ToKsOmega, DstToD0Pi_D0ToHpJmEta, DstToD0Pi_D0ToNeutrals, DstToD0Pi_D0ToHpJmKs, EarlyData_DstToD0Pi_D0ToHpJmPi0, EarlyData_DstToD0Pi_D0ToHpHmPi0, DstToDpPi0_DpToHpPi0, DpToHpPi0, DstToD0Pi_D0ToHpHmHpJm, DstToD0Pi_D0ToVGamma, DpToPipEpEm, DpToPipMupMum, DpToPipKpKm, DpToHpOmega, DspToHpOmega, DpToEtaHp, LambdacToGeneric, SinglePhotonDark, GammaGammaControlKLMDark, ALP3Gamma, EGammaControlDark, InelasticDarkMatter, RadBhabhaV0Control, TauLFV, DimuonPlusMissingEnergy, ElectronMuonPlusMissingEnergy, DielectronPlusMissingEnergy, LFVZpVisible, BtoKplusLLP, TauGeneric, TauThrust, TauKshort, TwoTrackLeptonsForLuminosity, LowMassTwoTrack, SingleTagPseudoScalar, InelasticDarkMatterWithDarkHiggs, AA2uuuu, DimuonPlusVisibleDarkHiggs, DielectronPlusVisibleDarkHiggs, DimuonRecoilMassSquared, LowMassOneTrack, DarkShower, BtoK_ALP2Gamma, TopologicalDarkPion, BtoPi0Pi0, BtoPi0Eta, BtoHadTracks, BtoHad1Pi0, BtoHad3Tracks1Pi0, BtoRhopRhom, BtoEtapKstp, BtoEtapRhop

List of all skims that are requested for production. This list will be used to produce resource usage estimates based on the skims that are actually requested.

-f, --requested-skims-file

File containing list of all skims that are requested for production. This list will be used to produce resource usage estimates based on the skims that are actually requested. The expected format of this file is one skim name per line, with each skim name exactly matching a name in the skim registry.

-a, --average-tables

Print tables of averages.

-t, --total-tables

Print tables of totals.

-b, --both-tables

Print both tables of averages and tables of totals.

21.4.10. `lpns2yaml.py`: Convert lists of LPNs to format expected by `b2skim-prod`#

%(prog)s is a tool for converting a list of LPNs into YAML format expected by b2skim-prod. The expected input to %(prog)s is a text file of LPNs, like those which can be downloaded from the dataset searcher.

The test sample labels (under the key sampleLabel) are automatically generated, so please check they all correspond to a label skim/scripts/TestFiles.yaml after running the script.

usage: lpns2yaml.py [-h] [-o output_filename] (--data | --mcri | --mcrd)
                    [--bg {BGx0,BGx1}]
                    input_lpn_list_file

Positional Arguments#

input_lpn_list_file: Input file containing list of LPNs (such as that from the dataset searcher).

Named Arguments#

-o

Output YAML file name. If none given, prints output to screen.

--data

Flag to indicate the LPNs are for data.

--mcri

Flag to indicate the LPNs are for run-independent MC.

--mcrd

Flag to indicate the LPNs are for run-dependent MC.

--bg

Possible choices: BGx0, BGx1

Beam background level of MC samples. Only required for MC.

Example usage

Convert list of BGx1 MCri LPNs into YAML format and print to screen:
```
$ %(prog)s my_MCri_LPNs.txt --mcri --bg BGx1
```
Convert list of BGx1 MCrd LPNs into YAML format and print to screen:
```
$ %(prog)s my_MCrd_LPNs.txt --mcrd --bg BGx1
```
Convert list of data LPNs into YAML format and save to file:
```
$ %(prog)s my_data_LPNs.txt --data -o my_data_LPNs.yaml
```

Information for skim experts

Contents

21.4. Information for skim experts#

21.4.1. Writing a skim#

21.4.2. Building skim lists in a steering file#

Skim flags#

21.4.3. Running a skim#

b2skim-run: Run a skim#

Positional Arguments#

Sub-commands#

single#

Positional Arguments#

Named Arguments#

combined#

Positional Arguments#

Named Arguments#

flagged#

Positional Arguments#

Named Arguments#

module#

Positional Arguments#

Named Arguments#

b2skim-generate: Generate skim steering files#

Positional Arguments#

Named Arguments#

b2skim-generate-validation: Generate skim validation scripts#

Named Arguments#

21.4.4. Skim registry#

21.4.5. Testing skim performance#

b2skim-stats-submit: Run skim scripts on test samples#

Named Arguments#

b2skim-stats-print: Print tables of performance statistics#

Named Arguments#

Running b2skim-stats tools on custom samples#

21.4.6. Core skim package API#

21.4.7. Utility functions for skim experts#

Skim flag implementation#

Per-cut retention checker#

Skim samples framework#

Miscellaneous utility functions#

21.4.8. b2skim-prod: Produce grid production requests#

Positional Arguments#

Named Arguments#

21.4.9. b2skim-stats-total: Produce summary statistics for skim package#

Named Arguments#

21.4.10. lpns2yaml.py: Convert lists of LPNs to format expected by b2skim-prod#

Positional Arguments#

Named Arguments#

`b2skim-run`: Run a skim#

`b2skim-generate`: Generate skim steering files#

`b2skim-generate-validation`: Generate skim validation scripts#

`b2skim-stats-submit`: Run skim scripts on test samples#

`b2skim-stats-print`: Print tables of performance statistics#

Running `b2skim-stats` tools on custom samples#

21.4.8. `b2skim-prod`: Produce grid production requests#

21.4.9. `b2skim-stats-total`: Produce summary statistics for skim package#

21.4.10. `lpns2yaml.py`: Convert lists of LPNs to format expected by `b2skim-prod`#